lkml.org 
[lkml]   [2009]   [Jan]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [Regression] Build failure in current mainline - firmware related
On Sat, Jan 03, 2009 at 10:43:28PM +0100, Rafael J. Wysocki wrote:
> On Saturday 03 January 2009, Sam Ravnborg wrote:
> > On Sat, Jan 03, 2009 at 09:49:48PM +0100, Sam Ravnborg wrote:
> > > On Sat, Jan 03, 2009 at 12:47:14PM +0100, Rafael J. Wysocki wrote:
> > > > Hi,
> > > >
> > > > I get the following error from 'make modules_install' on my test boxes:
> > > >
> > > > HOSTCC firmware/ihex2fw
> > > > /home/rafael/src/linux-2.6/firmware/ihex2fw.c:268: fatal error: opening dependency file firmware/.ihex2fw.d: Read-only file system
> > > > compilation terminated.
> > > > make[3]: *** [firmware/ihex2fw] Error 1
> > > > make[2]: *** [_modinst_post] Error 2
> > > > make[1]: *** [sub-make] Error 2
> > > > make: *** [all] Error 2
> > > >
> > > > where the configuration is that the kernel is compiled on a build box
> > > > with 'make O=<destdir> -j5' and then <destdir> is mounted over NFS read-only by
> > > > each test box (full path to this directory is the same on the build box and on
> > > > the test boxes). Then, I cd into <destdir>, run 'make modules_install' and get
> > > > the error above.
> > > >
> > > > 2.6.28 didn't have this problem.
> > >
> > >
> > > Strange...
> > > 1) The string "opening dependency file" does not occur in my freshly pulled kernel
> > > 2) Line 268 is last line of ihex2fw.c
> > >
> > > Could you try to do a "make modules_install V=1" to see the exact arguments supplied ti ihex2fw.c
> > >
> > > I gave up on all the firmware stuff long time ago and has
> > > never properly reviewed the implementation so I really
> > > have no clue what is actually happening.
> > >
> > > Walking through the 179 lines Makefile has not yet benn on my
> > > "fun to do" list - and it most likely take a while before it hits it.
> >
> > Took a quick peek. The Makefile uses "order only" in three spots.
> > This alone demand make version 3.80 IIRC and Documetnation/Changes
> > says 3.79.1...
> >
> > The "order only" is so rare that Paul Smith once said that
> > coming up with a good example of usage was not easy.
> >
> > For the headers_* stuff I recall when I reworked it I could
> > kill the usage of "order only" there but now it crept
> > back - sigh!
>
> Well, in the meantime I ran 'make modules_install V=1' and this is the
> last thing printed (the previous ones are not really interesting):
>
> make -f /home/rafael/src/linux-2.6/scripts/Makefile.fwinst obj=firmware __fw_modinst
> gcc -Wp,-MD,firmware/.ihex2fw.d -Ifirmware -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer -o firmware/ihex2fw /home/rafael/src/linux-2.6/firmware/ihex2fw.c
> /home/rafael/src/linux-2.6/firmware/ihex2fw.c:268: fatal error: opening dependency file firmware/.ihex2fw.d: Read-only file system
> compilation terminated.
> make[3]: *** [firmware/ihex2fw] Error 1
> make[2]: *** [_modinst_post] Error 2
> make[1]: *** [sub-make] Error 2
> make: *** [all] Error 2
>
> It fails because of the attempt to compile ihex2fw .

There are at least two obvious ways to fix this.

We could try to rearrange things so we do not trigger
the rebuild of ihex2fw in the modules_install case.
This would likely involve creating a new file listing
all the firmawre files and share it between firmware/Makefile
and scripts/Makefile.fwinst

We could also move ihex2fw to scripts so it is build
as part of the preparation for a kernel build.

Attched patch does the latter.
[I will update the changelog before I eventually commit it].

Sam

Patch is in old-style but the majority of the patch is the file move.

From f023a3d57e2b70a2d3d9ac4a484f1d337f2a02e3 Mon Sep 17 00:00:00 2001
From: Sam Ravnborg <sam@ravnborg.org>
Date: Sun, 4 Jan 2009 22:38:21 +0100
Subject: [PATCH] kbuild: move ihex2fw to scripts

This fix a situation where we try to rebuild ihex2fw
when we do modules_install

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
---
firmware/Makefile | 10 +-
firmware/ihex2fw.c | 268 ----------------------------------------------------
scripts/Makefile | 2 +
scripts/ihex2fw.c | 268 ++++++++++++++++++++++++++++++++++++++++++++++++++++
4 files changed, 274 insertions(+), 274 deletions(-)
delete mode 100644 firmware/ihex2fw.c
create mode 100644 scripts/ihex2fw.c

diff --git a/firmware/Makefile b/firmware/Makefile
index 6968388..0423c41 100644
--- a/firmware/Makefile
+++ b/firmware/Makefile
@@ -88,10 +88,10 @@ quiet_cmd_ihex = IHEX $@
cmd_ihex = $(OBJCOPY) -Iihex -Obinary $< $@

quiet_cmd_ihex2fw = IHEX2FW $@
- cmd_ihex2fw = $(objtree)/$(obj)/ihex2fw $< $@
+ cmd_ihex2fw = $(objtree)/scripts/ihex2fw $< $@

quiet_cmd_h16tofw = H16TOFW $@
- cmd_h16tofw = $(objtree)/$(obj)/ihex2fw -w $< $@
+ cmd_h16tofw = $(objtree)/scripts/ihex2fw -w $< $@

quiet_cmd_fwbin = MK_FW $@
cmd_fwbin = FWNAME="$(patsubst firmware/%.gen.S,%,$@)"; \
@@ -154,11 +154,11 @@ $(obj)/%: $(obj)/%.ihex | $(objtree)/$(obj)/$$(dir %)
# is actually meaningful, because the firmware has to be loaded in a certain
# order rather than as a single binary blob. Thus, we convert them into our
# more compact binary representation of ihex records (<linux/ihex.h>)
-$(obj)/%.fw: $(obj)/%.HEX $(obj)/ihex2fw | $(objtree)/$(obj)/$$(dir %)
+$(obj)/%.fw: $(obj)/%.HEX | $(objtree)/$(obj)/$$(dir %)
$(call cmd,ihex2fw)

# .H16 is our own modified form of Intel HEX, with 16-bit length for records.
-$(obj)/%.fw: $(obj)/%.H16 $(obj)/ihex2fw | $(objtree)/$(obj)/$$(dir %)
+$(obj)/%.fw: $(obj)/%.H16 | $(objtree)/$(obj)/$$(dir %)
$(call cmd,h16tofw)

$(firmware-dirs):
@@ -175,5 +175,3 @@ targets := $(fw-shipped-) $(patsubst $(obj)/%,%, \
# Without this, built-in.o won't be created when it's empty, and the
# final vmlinux link will fail.
obj-n := dummy
-
-hostprogs-y := ihex2fw
diff --git a/firmware/ihex2fw.c b/firmware/ihex2fw.c
deleted file mode 100644
index 8f7fdaa..0000000
--- a/firmware/ihex2fw.c
+++ /dev/null
@@ -1,268 +0,0 @@
-/*
- * Parser/loader for IHEX formatted data.
- *
- * Copyright © 2008 David Woodhouse <dwmw2@infradead.org>
- * Copyright © 2005 Jan Harkes <jaharkes@cs.cmu.edu>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <stdint.h>
-#include <arpa/inet.h>
-#include <stdio.h>
-#include <errno.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <sys/mman.h>
-#include <fcntl.h>
-#include <string.h>
-#include <unistd.h>
-#include <stdlib.h>
-#define _GNU_SOURCE
-#include <getopt.h>
-
-
-struct ihex_binrec {
- struct ihex_binrec *next; /* not part of the real data structure */
- uint32_t addr;
- uint16_t len;
- uint8_t data[];
-};
-
-/**
- * nybble/hex are little helpers to parse hexadecimal numbers to a byte value
- **/
-static uint8_t nybble(const uint8_t n)
-{
- if (n >= '0' && n <= '9') return n - '0';
- else if (n >= 'A' && n <= 'F') return n - ('A' - 10);
- else if (n >= 'a' && n <= 'f') return n - ('a' - 10);
- return 0;
-}
-
-static uint8_t hex(const uint8_t *data, uint8_t *crc)
-{
- uint8_t val = (nybble(data[0]) << 4) | nybble(data[1]);
- *crc += val;
- return val;
-}
-
-static int process_ihex(uint8_t *data, ssize_t size);
-static void file_record(struct ihex_binrec *record);
-static int output_records(int outfd);
-
-static int sort_records = 0;
-static int wide_records = 0;
-
-int usage(void)
-{
- fprintf(stderr, "ihex2fw: Convert ihex files into binary "
- "representation for use by Linux kernel\n");
- fprintf(stderr, "usage: ihex2fw [<options>] <src.HEX> <dst.fw>\n");
- fprintf(stderr, " -w: wide records (16-bit length)\n");
- fprintf(stderr, " -s: sort records by address\n");
- return 1;
-}
-
-int main(int argc, char **argv)
-{
- int infd, outfd;
- struct stat st;
- uint8_t *data;
- int opt;
-
- while ((opt = getopt(argc, argv, "ws")) != -1) {
- switch (opt) {
- case 'w':
- wide_records = 1;
- break;
- case 's':
- sort_records = 1;
- break;
- default:
- return usage();
- }
- }
-
- if (optind + 2 != argc)
- return usage();
-
- if (!strcmp(argv[optind], "-"))
- infd = 0;
- else
- infd = open(argv[optind], O_RDONLY);
- if (infd == -1) {
- fprintf(stderr, "Failed to open source file: %s",
- strerror(errno));
- return usage();
- }
- if (fstat(infd, &st)) {
- perror("stat");
- return 1;
- }
- data = mmap(NULL, st.st_size, PROT_READ, MAP_SHARED, infd, 0);
- if (data == MAP_FAILED) {
- perror("mmap");
- return 1;
- }
-
- if (!strcmp(argv[optind+1], "-"))
- outfd = 1;
- else
- outfd = open(argv[optind+1], O_TRUNC|O_CREAT|O_WRONLY, 0644);
- if (outfd == -1) {
- fprintf(stderr, "Failed to open destination file: %s",
- strerror(errno));
- return usage();
- }
- if (process_ihex(data, st.st_size))
- return 1;
-
- output_records(outfd);
- return 0;
-}
-
-static int process_ihex(uint8_t *data, ssize_t size)
-{
- struct ihex_binrec *record;
- uint32_t offset = 0;
- uint8_t type, crc = 0, crcbyte = 0;
- int i, j;
- int line = 1;
- int len;
-
- i = 0;
-next_record:
- /* search for the start of record character */
- while (i < size) {
- if (data[i] == '\n') line++;
- if (data[i++] == ':') break;
- }
-
- /* Minimum record length would be about 10 characters */
- if (i + 10 > size) {
- fprintf(stderr, "Can't find valid record at line %d\n", line);
- return -EINVAL;
- }
-
- len = hex(data + i, &crc); i += 2;
- if (wide_records) {
- len <<= 8;
- len += hex(data + i, &crc); i += 2;
- }
- record = malloc((sizeof (*record) + len + 3) & ~3);
- if (!record) {
- fprintf(stderr, "out of memory for records\n");
- return -ENOMEM;
- }
- memset(record, 0, (sizeof(*record) + len + 3) & ~3);
- record->len = len;
-
- /* now check if we have enough data to read everything */
- if (i + 8 + (record->len * 2) > size) {
- fprintf(stderr, "Not enough data to read complete record at line %d\n",
- line);
- return -EINVAL;
- }
-
- record->addr = hex(data + i, &crc) << 8; i += 2;
- record->addr |= hex(data + i, &crc); i += 2;
- type = hex(data + i, &crc); i += 2;
-
- for (j = 0; j < record->len; j++, i += 2)
- record->data[j] = hex(data + i, &crc);
-
- /* check CRC */
- crcbyte = hex(data + i, &crc); i += 2;
- if (crc != 0) {
- fprintf(stderr, "CRC failure at line %d: got 0x%X, expected 0x%X\n",
- line, crcbyte, (unsigned char)(crcbyte-crc));
- return -EINVAL;
- }
-
- /* Done reading the record */
- switch (type) {
- case 0:
- /* old style EOF record? */
- if (!record->len)
- break;
-
- record->addr += offset;
- file_record(record);
- goto next_record;
-
- case 1: /* End-Of-File Record */
- if (record->addr || record->len) {
- fprintf(stderr, "Bad EOF record (type 01) format at line %d",
- line);
- return -EINVAL;
- }
- break;
-
- case 2: /* Extended Segment Address Record (HEX86) */
- case 4: /* Extended Linear Address Record (HEX386) */
- if (record->addr || record->len != 2) {
- fprintf(stderr, "Bad HEX86/HEX386 record (type %02X) at line %d\n",
- type, line);
- return -EINVAL;
- }
-
- /* We shouldn't really be using the offset for HEX86 because
- * the wraparound case is specified quite differently. */
- offset = record->data[0] << 8 | record->data[1];
- offset <<= (type == 2 ? 4 : 16);
- goto next_record;
-
- case 3: /* Start Segment Address Record */
- case 5: /* Start Linear Address Record */
- if (record->addr || record->len != 4) {
- fprintf(stderr, "Bad Start Address record (type %02X) at line %d\n",
- type, line);
- return -EINVAL;
- }
-
- /* These records contain the CS/IP or EIP where execution
- * starts. Don't really know what to do with them. */
- goto next_record;
-
- default:
- fprintf(stderr, "Unknown record (type %02X)\n", type);
- return -EINVAL;
- }
-
- return 0;
-}
-
-static struct ihex_binrec *records;
-
-static void file_record(struct ihex_binrec *record)
-{
- struct ihex_binrec **p = &records;
-
- while ((*p) && (!sort_records || (*p)->addr < record->addr))
- p = &((*p)->next);
-
- record->next = *p;
- *p = record;
-}
-
-static int output_records(int outfd)
-{
- unsigned char zeroes[6] = {0, 0, 0, 0, 0, 0};
- struct ihex_binrec *p = records;
-
- while (p) {
- uint16_t writelen = (p->len + 9) & ~3;
-
- p->addr = htonl(p->addr);
- p->len = htons(p->len);
- write(outfd, &p->addr, writelen);
- p = p->next;
- }
- /* EOF record is zero length, since we don't bother to represent
- the type field in the binary version */
- write(outfd, zeroes, 6);
- return 0;
-}
diff --git a/scripts/Makefile b/scripts/Makefile
index aafdf06..db5dd47 100644
--- a/scripts/Makefile
+++ b/scripts/Makefile
@@ -2,11 +2,13 @@
# scripts contains sources for various helper programs used throughout
# the kernel for the build process.
# ---------------------------------------------------------------------------
+# ihex2fw: Parser/loader for IHEX formatted data
# kallsyms: Find all symbols in vmlinux
# pnmttologo: Convert pnm files to logo files
# conmakehash: Create chartable
# conmakehash: Create arrays for initializing the kernel console tables

+hostprogs-y := ihex2fw
hostprogs-$(CONFIG_KALLSYMS) += kallsyms
hostprogs-$(CONFIG_LOGO) += pnmtologo
hostprogs-$(CONFIG_VT) += conmakehash
diff --git a/scripts/ihex2fw.c b/scripts/ihex2fw.c
new file mode 100644
index 0000000..8f7fdaa
--- /dev/null
+++ b/scripts/ihex2fw.c
@@ -0,0 +1,268 @@
+/*
+ * Parser/loader for IHEX formatted data.
+ *
+ * Copyright © 2008 David Woodhouse <dwmw2@infradead.org>
+ * Copyright © 2005 Jan Harkes <jaharkes@cs.cmu.edu>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <stdint.h>
+#include <arpa/inet.h>
+#include <stdio.h>
+#include <errno.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <sys/mman.h>
+#include <fcntl.h>
+#include <string.h>
+#include <unistd.h>
+#include <stdlib.h>
+#define _GNU_SOURCE
+#include <getopt.h>
+
+
+struct ihex_binrec {
+ struct ihex_binrec *next; /* not part of the real data structure */
+ uint32_t addr;
+ uint16_t len;
+ uint8_t data[];
+};
+
+/**
+ * nybble/hex are little helpers to parse hexadecimal numbers to a byte value
+ **/
+static uint8_t nybble(const uint8_t n)
+{
+ if (n >= '0' && n <= '9') return n - '0';
+ else if (n >= 'A' && n <= 'F') return n - ('A' - 10);
+ else if (n >= 'a' && n <= 'f') return n - ('a' - 10);
+ return 0;
+}
+
+static uint8_t hex(const uint8_t *data, uint8_t *crc)
+{
+ uint8_t val = (nybble(data[0]) << 4) | nybble(data[1]);
+ *crc += val;
+ return val;
+}
+
+static int process_ihex(uint8_t *data, ssize_t size);
+static void file_record(struct ihex_binrec *record);
+static int output_records(int outfd);
+
+static int sort_records = 0;
+static int wide_records = 0;
+
+int usage(void)
+{
+ fprintf(stderr, "ihex2fw: Convert ihex files into binary "
+ "representation for use by Linux kernel\n");
+ fprintf(stderr, "usage: ihex2fw [<options>] <src.HEX> <dst.fw>\n");
+ fprintf(stderr, " -w: wide records (16-bit length)\n");
+ fprintf(stderr, " -s: sort records by address\n");
+ return 1;
+}
+
+int main(int argc, char **argv)
+{
+ int infd, outfd;
+ struct stat st;
+ uint8_t *data;
+ int opt;
+
+ while ((opt = getopt(argc, argv, "ws")) != -1) {
+ switch (opt) {
+ case 'w':
+ wide_records = 1;
+ break;
+ case 's':
+ sort_records = 1;
+ break;
+ default:
+ return usage();
+ }
+ }
+
+ if (optind + 2 != argc)
+ return usage();
+
+ if (!strcmp(argv[optind], "-"))
+ infd = 0;
+ else
+ infd = open(argv[optind], O_RDONLY);
+ if (infd == -1) {
+ fprintf(stderr, "Failed to open source file: %s",
+ strerror(errno));
+ return usage();
+ }
+ if (fstat(infd, &st)) {
+ perror("stat");
+ return 1;
+ }
+ data = mmap(NULL, st.st_size, PROT_READ, MAP_SHARED, infd, 0);
+ if (data == MAP_FAILED) {
+ perror("mmap");
+ return 1;
+ }
+
+ if (!strcmp(argv[optind+1], "-"))
+ outfd = 1;
+ else
+ outfd = open(argv[optind+1], O_TRUNC|O_CREAT|O_WRONLY, 0644);
+ if (outfd == -1) {
+ fprintf(stderr, "Failed to open destination file: %s",
+ strerror(errno));
+ return usage();
+ }
+ if (process_ihex(data, st.st_size))
+ return 1;
+
+ output_records(outfd);
+ return 0;
+}
+
+static int process_ihex(uint8_t *data, ssize_t size)
+{
+ struct ihex_binrec *record;
+ uint32_t offset = 0;
+ uint8_t type, crc = 0, crcbyte = 0;
+ int i, j;
+ int line = 1;
+ int len;
+
+ i = 0;
+next_record:
+ /* search for the start of record character */
+ while (i < size) {
+ if (data[i] == '\n') line++;
+ if (data[i++] == ':') break;
+ }
+
+ /* Minimum record length would be about 10 characters */
+ if (i + 10 > size) {
+ fprintf(stderr, "Can't find valid record at line %d\n", line);
+ return -EINVAL;
+ }
+
+ len = hex(data + i, &crc); i += 2;
+ if (wide_records) {
+ len <<= 8;
+ len += hex(data + i, &crc); i += 2;
+ }
+ record = malloc((sizeof (*record) + len + 3) & ~3);
+ if (!record) {
+ fprintf(stderr, "out of memory for records\n");
+ return -ENOMEM;
+ }
+ memset(record, 0, (sizeof(*record) + len + 3) & ~3);
+ record->len = len;
+
+ /* now check if we have enough data to read everything */
+ if (i + 8 + (record->len * 2) > size) {
+ fprintf(stderr, "Not enough data to read complete record at line %d\n",
+ line);
+ return -EINVAL;
+ }
+
+ record->addr = hex(data + i, &crc) << 8; i += 2;
+ record->addr |= hex(data + i, &crc); i += 2;
+ type = hex(data + i, &crc); i += 2;
+
+ for (j = 0; j < record->len; j++, i += 2)
+ record->data[j] = hex(data + i, &crc);
+
+ /* check CRC */
+ crcbyte = hex(data + i, &crc); i += 2;
+ if (crc != 0) {
+ fprintf(stderr, "CRC failure at line %d: got 0x%X, expected 0x%X\n",
+ line, crcbyte, (unsigned char)(crcbyte-crc));
+ return -EINVAL;
+ }
+
+ /* Done reading the record */
+ switch (type) {
+ case 0:
+ /* old style EOF record? */
+ if (!record->len)
+ break;
+
+ record->addr += offset;
+ file_record(record);
+ goto next_record;
+
+ case 1: /* End-Of-File Record */
+ if (record->addr || record->len) {
+ fprintf(stderr, "Bad EOF record (type 01) format at line %d",
+ line);
+ return -EINVAL;
+ }
+ break;
+
+ case 2: /* Extended Segment Address Record (HEX86) */
+ case 4: /* Extended Linear Address Record (HEX386) */
+ if (record->addr || record->len != 2) {
+ fprintf(stderr, "Bad HEX86/HEX386 record (type %02X) at line %d\n",
+ type, line);
+ return -EINVAL;
+ }
+
+ /* We shouldn't really be using the offset for HEX86 because
+ * the wraparound case is specified quite differently. */
+ offset = record->data[0] << 8 | record->data[1];
+ offset <<= (type == 2 ? 4 : 16);
+ goto next_record;
+
+ case 3: /* Start Segment Address Record */
+ case 5: /* Start Linear Address Record */
+ if (record->addr || record->len != 4) {
+ fprintf(stderr, "Bad Start Address record (type %02X) at line %d\n",
+ type, line);
+ return -EINVAL;
+ }
+
+ /* These records contain the CS/IP or EIP where execution
+ * starts. Don't really know what to do with them. */
+ goto next_record;
+
+ default:
+ fprintf(stderr, "Unknown record (type %02X)\n", type);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static struct ihex_binrec *records;
+
+static void file_record(struct ihex_binrec *record)
+{
+ struct ihex_binrec **p = &records;
+
+ while ((*p) && (!sort_records || (*p)->addr < record->addr))
+ p = &((*p)->next);
+
+ record->next = *p;
+ *p = record;
+}
+
+static int output_records(int outfd)
+{
+ unsigned char zeroes[6] = {0, 0, 0, 0, 0, 0};
+ struct ihex_binrec *p = records;
+
+ while (p) {
+ uint16_t writelen = (p->len + 9) & ~3;
+
+ p->addr = htonl(p->addr);
+ p->len = htons(p->len);
+ write(outfd, &p->addr, writelen);
+ p = p->next;
+ }
+ /* EOF record is zero length, since we don't bother to represent
+ the type field in the binary version */
+ write(outfd, zeroes, 6);
+ return 0;
+}
--
1.6.0.2.GIT

>
> Thanks,
> Rafael
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2009-01-04 22:45    [W:0.077 / U:0.228 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site