lkml.org 
[lkml]   [2009]   [Jan]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH 1/2] drivers/media/video: Use negated usb_endpoint_xfer_control, etc
From: Julia Lawall <julia@diku.dk>

This patch extends 134179823b3ca9c8b98e0631906459dbb022ff9b by using
usb_endpoint_xfer_control, usb_endpoint_xfer_isoc, usb_endpoint_xfer_bulk,
and usb_endpoint_xfer_int in the negated case as well.

The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@@ struct usb_endpoint_descriptor *epd; @@

- (usb_endpoint_type(epd) != \(USB_ENDPOINT_XFER_CONTROL\|0\))
+ !usb_endpoint_xfer_control(epd)

@@ struct usb_endpoint_descriptor *epd; @@

- (usb_endpoint_type(epd) != \(USB_ENDPOINT_XFER_ISOC\|1\))
+ !usb_endpoint_xfer_isoc(epd)

@@ struct usb_endpoint_descriptor *epd; @@

- (usb_endpoint_type(epd) != \(USB_ENDPOINT_XFER_BULK\|2\))
+ !usb_endpoint_xfer_bulk(epd)

@@ struct usb_endpoint_descriptor *epd; @@

- (usb_endpoint_type(epd) != \(USB_ENDPOINT_XFER_INT\|3\))
+ !usb_endpoint_xfer_int(epd)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>

---
diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c
index e776699..1fc4e78 100644
--- a/drivers/media/video/em28xx/em28xx-cards.c
+++ b/drivers/media/video/em28xx/em28xx-cards.c
@@ -1990,8 +1990,7 @@ static int em28xx_usb_probe(struct usb_interface *interface,
int check_interface = 1;
isoc_pipe = 1;
endpoint = &interface->cur_altsetting->endpoint[1].desc;
- if (usb_endpoint_type(endpoint) !=
- USB_ENDPOINT_XFER_ISOC)
+ if (!usb_endpoint_xfer_isoc(endpoint))
check_interface = 0;

if (usb_endpoint_dir_out(endpoint))
diff --git a/drivers/media/video/usbvideo/ibmcam.c b/drivers/media/video/usbvideo/ibmcam.c
index f8d85dd..b085496 100644
--- a/drivers/media/video/usbvideo/ibmcam.c
+++ b/drivers/media/video/usbvideo/ibmcam.c
@@ -3779,7 +3779,7 @@ static int ibmcam_probe(struct usb_interface *intf, const struct usb_device_id *
err("Alternate settings have different endpoint addresses!");
return -ENODEV;
}
- if (usb_endpoint_type(endpoint) != USB_ENDPOINT_XFER_ISOC) {
+ if (!usb_endpoint_xfer_isoc(endpoint)) {
err("Interface %d. has non-ISO endpoint!", ifnum);
return -ENODEV;
}
diff --git a/drivers/media/video/usbvideo/konicawc.c b/drivers/media/video/usbvideo/konicawc.c
index 90f0ce6..900ec21 100644
--- a/drivers/media/video/usbvideo/konicawc.c
+++ b/drivers/media/video/usbvideo/konicawc.c
@@ -823,7 +823,7 @@ static int konicawc_probe(struct usb_interface *intf, const struct usb_device_id
err("Alternate settings have different endpoint addresses!");
return -ENODEV;
}
- if (usb_endpoint_type(endpoint) != USB_ENDPOINT_XFER_ISOC) {
+ if (!usb_endpoint_xfer_isoc(endpoint)) {
err("Interface %d. has non-ISO endpoint!",
interface->desc.bInterfaceNumber);
return -ENODEV;
diff --git a/drivers/media/video/usbvideo/ultracam.c b/drivers/media/video/usbvideo/ultracam.c
index 839a082..fbd1b63 100644
--- a/drivers/media/video/usbvideo/ultracam.c
+++ b/drivers/media/video/usbvideo/ultracam.c
@@ -556,7 +556,7 @@ static int ultracam_probe(struct usb_interface *intf, const struct usb_device_id
err("Alternate settings have different endpoint addresses!");
return -ENODEV;
}
- if (usb_endpoint_type(endpoint) != USB_ENDPOINT_XFER_ISOC) {
+ if (!usb_endpoint_xfer_isoc(endpoint)) {
err("Interface %d. has non-ISO endpoint!",
interface->desc.bInterfaceNumber);
return -ENODEV;
diff --git a/drivers/media/video/usbvision/usbvision-video.c b/drivers/media/video/usbvision/usbvision-video.c
index 85661b1..70d34b2 100644
--- a/drivers/media/video/usbvision/usbvision-video.c
+++ b/drivers/media/video/usbvision/usbvision-video.c
@@ -1679,8 +1679,7 @@ static int __devinit usbvision_probe(struct usb_interface *intf,
interface = &dev->actconfig->interface[ifnum]->altsetting[0];
}
endpoint = &interface->endpoint[1].desc;
- if (usb_endpoint_type(endpoint) !=
- USB_ENDPOINT_XFER_ISOC) {
+ if (!usb_endpoint_xfer_isoc(endpoint)) {
err("%s: interface %d. has non-ISO endpoint!",
__func__, ifnum);
err("%s: Endpoint attributes %d",

\
 
 \ /
  Last update: 2009-01-03 17:55    [W:0.070 / U:1.816 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site