lkml.org 
[lkml]   [2009]   [Jan]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH B 10/10] OMAP3: PM: Emu_pwrdm is switched off by hardware even when sdti is in use
Date
From: Jouni Hogander <jouni.hogander@nokia.com>

Using sdti doesn't keep emu_pwrdm on if hardware supervised pwrdm
transitions are used. This causes sdti stop to work when power
management is initialized and hardware supervised pwrdm control is
enabled. This patch disables hardware supervised pwrdm control for
emu_pwrdm. Now emu_pwrdm is switched off on boot by software when it
is not used.

Signed-off-by: Jouni Hogander <jouni.hogander@nokia.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/mach-omap2/clockdomains.h | 6 +++++-
1 files changed, 5 insertions(+), 1 deletions(-)

diff --git a/arch/arm/mach-omap2/clockdomains.h b/arch/arm/mach-omap2/clockdomains.h
index bafa650..3d4eaca 100644
--- a/arch/arm/mach-omap2/clockdomains.h
+++ b/arch/arm/mach-omap2/clockdomains.h
@@ -251,10 +251,14 @@ static struct clockdomain per_clkdm = {
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};

+/*
+ * Disable hw supervised mode for emu_clkdm, because emu_pwrdm is
+ * switched of even if sdti is in use
+ */
static struct clockdomain emu_clkdm = {
.name = "emu_clkdm",
.pwrdm = { .name = "emu_pwrdm" },
- .flags = CLKDM_CAN_ENABLE_AUTO | CLKDM_CAN_SWSUP,
+ .flags = /* CLKDM_CAN_ENABLE_AUTO | */CLKDM_CAN_SWSUP,
.clktrctrl_mask = OMAP3430_CLKTRCTRL_EMU_MASK,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};



\
 
 \ /
  Last update: 2009-01-28 21:55    [W:2.153 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site