lkml.org 
[lkml]   [2009]   [Jan]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Subject[PATCH 0/2] [Target_Core_Mod] Add running SPC-3 Persistent Reservation logic
From
Date
Greetings all,

This patch series adds the first running SPC-3 compliant Persistent Reservation
emulation support for PROUT REGISTER -> PROUT RESERVE -> PRIN READ_RESERVATIONS ->
PROUT RELEASE -> PROUT UNREGISTER, tested and running with Doug Gilbert's
very excellent sg_persist command. This was tested against Open/iSCSI Initiators
running LIO-Target iSCSI/TCP, and Core-iSCSI Initiators running LIO-Target iSCSI/SCTP.

I will be adding information about TCM/LIO-Target v3.0 and LIO-Target v2.9 usage wrt
Persistent Reservations on to the http://Linux-iSCSI.org wiki at some point as well,
so folks can get their own SPC-3 compliant PR enabled Linux/iSCSI Targets up and running!

This patch is made against lio-core-2.6.git/master and tested on v2.6.29-rc2 x86
32-bit HVM. The lio-core-2.6.git tree can be found at:

http://git.kernel.org/?p=linux/kernel/git/nab/lio-core-2.6.git;a=summary

Subject: [PATCH 1/2] [Target_Core_Mod/PERSISTENT_RESERVATION]: Add Service Action RESERVE/RELEASE w/ all_tg_pt=[0,1]
Subject: [PATCH 2/2] [Target_Core_Mod/ConfigFS]: Updates for PERSISTENT_RESERVE

Unpacking objects: 100% (12/12), done.
>From /pub/scm/linux/kernel/git/nab/lio-core-2.6
* branch master -> FETCH_HEAD
Updating a4bcd2c..ab56467
Fast forward
drivers/lio-core/target_core_base.h | 3 +-
drivers/lio-core/target_core_configfs.c | 116 +++++++++--
drivers/lio-core/target_core_pr.c | 354 ++++++++++++++++++++++++++++++-
drivers/lio-core/target_core_pr.h | 1 +
4 files changed, 446 insertions(+), 28 deletions(-)

Here is what it looks like in action, starting from the start, with no
PR registrations or reservations, lets have a look via Target_Core_Mod/ConfigFS
for a Linux LVM block device:

*) The setup...

Here is waht things now look like in Target_Core_Mod/ConfigFS for each
$HBA/$STORAGE_OBJECT, in this example, a Linux LVM struct block_device named
'lvm_test0' is used for the ConfigFS $STORAGE_OBJECT:

`-- target
|-- core
| |-- iblock_0
| | |-- hba_info
| | `-- lvm_test0
<SNIP>
| | |-- pr
| | | |-- res_holder
| | | |-- res_pr_all_tgt_pts
| | | |-- res_pr_generation
| | | |-- res_pr_registered_i_pts
| | | |-- res_pr_type
| | | `-- res_type
| | `-- wwn
| | |-- evpd_assoc_logical_unit
| | |-- evpd_assoc_scsi_target_device
| | |-- evpd_assoc_target_port
| | |-- evpd_protocol_identifier
| | `-- evpd_unit_serial
<SNIP>

initiator# # sg_persist --in --report-capabilities -v /dev/sde
inquiry cdb: 12 00 00 00 24 00
LIO-ORG IBLOCK v3.0
Peripheral device type: disk
Persistent Reservation In cmd: 5e 02 00 00 00 00 00 20 00 00
Report capabilities response:
Compatible Reservation Handling(CRH): 0
Specify Initiator Ports Capable(SIP_C): 0
All Target Ports Capable(ATP_C): 1
Persist Through Power Loss Capable(PTPL_C): 0
Type Mask Valid(TMV): 1
Allow commands: 1
Persist Through Power Loss Active(PTPL_A): 0
Support indicated in Type mask:
Write Exclusive, all registrants: 0
Exclusive Access, registrants only: 0
Write Exclusive, registrants only: 0
Exclusive Access: 1
Write Exclusive: 1
Exclusive Access, all registrants: 0

target# cat /sys/kernel/config/target/core/iblock_0/lvm_test0/pr/*
No SPC-3 Reservation holder
No SPC-3 Reservation holder
0x00000000
SPC-3 PR Registrations:
None
No SPC-3 Reservation holder
SPC3_PERSISTENT_RESERVATIONS

*) PROUT REGISTER:

initiator# sg_persist --out --register --param-sark=0x5678efff --param-alltgpt -v /dev/sde
inquiry cdb: 12 00 00 00 24 00
LIO-ORG IBLOCK v3.0
Peripheral device type: disk
Persistent Reservation Out cmd: 5f 00 00 00 00 00 00 00 18 00
PR out: command (Register) successful

target# cat /sys/kernel/config/target/core/iblock_0/lvm_test0/pr/*
No SPC-3 Reservation holder
No SPC-3 Reservation holder
0x00000001
SPC-3 PR Registrations:
iSCSI Node: iqn.1993-08.org.debian:01:2dadf92d0ef Key: 0x000000005678efff PRgen: 0x00000000
No SPC-3 Reservation holder
SPC3_PERSISTENT_RESERVATIONS

*) PROUT RESERVE: With a prout_type=1 for PR Type: WRITE_EXCLUSIVE (0x01)

initiator# sg_persist --out --reserve --param-rk=0x5678efff --prout-type=1 -v /dev/sde
inquiry cdb: 12 00 00 00 24 00
LIO-ORG IBLOCK v3.0
Peripheral device type: disk
Persistent Reservation Out cmd: 5f 01 01 00 00 00 00 00 18 00
PR out: command (Reserve) successful

target# cat /sys/kernel/config/target/core/iblock_0/lvm_test0/pr/*
SPC-3 Reservation FABRIC[iSCSI]: Initiator: iqn.1993-08.org.debian:01:2dadf92d0ef
SPC-3 Reservation holder: All Target Ports reserved
0x00000001
SPC-3 PR Registrations:
iSCSI Node: iqn.1993-08.org.debian:01:2dadf92d0ef Key: 0x000000005678efff PRgen: 0x00000000
SPC-3 Reservation Type: Write Exclusive Access
SPC3_PERSISTENT_RESERVATIONS

*) PRIN READ_RESERVATIONS:

initiator# sg_persist --in --read-reservation -v /dev/sde
inquiry cdb: 12 00 00 00 24 00
LIO-ORG IBLOCK v3.0
Peripheral device type: disk
Persistent Reservation In cmd: 5e 01 00 00 00 00 00 20 00 00
PR generation=0x1, Reservation follows:
Key=0x5678efff
scope: LU_SCOPE, type: Write Exclusive

*) PROUT RELEASE:

initiator# sg_persist --out --release --param-rk=0x5678efff --prout-type=1 -v /dev/sde
inquiry cdb: 12 00 00 00 24 00
LIO-ORG IBLOCK v3.0
Peripheral device type: disk
Persistent Reservation Out cmd: 5f 02 01 00 00 00 00 00 18 00
PR out: command (Release) successful

target# cat /sys/kernel/config/target/core/iblock_0/lvm_test0/pr/*
No SPC-3 Reservation holder
No SPC-3 Reservation holder
0x00000001
SPC-3 PR Registrations:
iSCSI Node: iqn.1993-08.org.debian:01:2dadf92d0ef Key: 0x000000005678efff PRgen: 0x00000000
No SPC-3 Reservation holder
SPC3_PERSISTENT_RESERVATIONS

*) PRIN UNREGISTER:

initiator# sg_persist --out --register --param-rk=0x5678efff --param-sark=0 -v /dev/sde
inquiry cdb: 12 00 00 00 24 00
LIO-ORG IBLOCK v3.0
Peripheral device type: disk
Persistent Reservation Out cmd: 5f 00 00 00 00 00 00 00 18 00
PR out: command (Register) successful

target#cat /sys/kernel/config/target/core/iblock_0/lvm_test0/pr/*
No SPC-3 Reservation holder
No SPC-3 Reservation holder
0x00000001
SPC-3 PR Registrations:
None
No SPC-3 Reservation holder
SPC3_PERSISTENT_RESERVATIONS

Comments..?

--nab



\
 
 \ /
  Last update: 2009-01-28 08:43    [W:0.046 / U:0.228 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site