Messages in this thread | | | Date | Mon, 26 Jan 2009 13:07:30 -0800 | From | Greg KH <> | Subject | Re: Linux 2.6.27.13 |
| |
On Mon, Jan 26, 2009 at 09:01:36PM +0100, Jesper Krogh wrote: > Greg KH wrote: >> We (the -stable team) are announcing the release of the 2.6.27.13 >> kernel. >> It contains a wide range of bugfixes, and all users of the 2.6.27 kernel >> series are strongly encouraged to upgrade. >> I'll also be replying to this message with a copy of the patch between >> 2.6.27.12 and 2.6.27.13 > > Hi. > > I'm getting some e1000 noise on a 2.6.27.6, I search the log up to .13 but > couldn't find any log messsage that looked like it fixed it. > > > [862734.501786] ------------[ cut here ]------------ > [862734.501793] WARNING: at net/sched/sch_generic.c:219 > dev_watchdog+0x1f8/0x210() > [862734.501795] NETDEV WATCHDOG: eth0 (e1000): transmit timed out
I've been getting a lot of reports about this as well. Did it show up in 2.6.27.6?
Netdev developers, any ideas of what would be causing this?
thanks,
greg k-h
(rest of the oops message below...)
> [862734.501796] Modules linked in: af_packet nfsd auth_rpcgss exportfs > autofs4 nfs lockd sunrpc ipv6 bonding iptable_filter ip_tables x_tables > lm87 adm1026 hwmon_vid ipmi_devintf ipmi_si ipmi_msghandler parport_pc lp > parport loop cfi_cmdset_0001 cfi_util jedec_probe cfi_probe psmouse > gen_probe serio_raw ck804xrom i2c_nforce2 mtd pcspkr chipreg shpchp > pci_hotplug i2c_core k8temp map_funcs joydev button evdev ext3 jbd mbcache > ide_cd_mod sr_mod cdrom sg usb_storage libusual ata_generic libata sd_mod > dock usbhid hid mptsas mptscsih qla2xxx mptbase scsi_transport_fc amd74xx > scsi_transport_sas ehci_hcd e1000 ohci_hcd scsi_mod ide_core usbcore > thermal processor fan thermal_sys fuse > [862734.501837] Pid: 0, comm: swapper Not tainted 2.6.27.6 #2 > [862734.501839] > [862734.501840] Call Trace: > [862734.501842] <IRQ> [<ffffffff80237a7d>] warn_slowpath+0xcd/0x110 > [862734.501853] [<ffffffff8022cc3d>] enqueue_task_fair+0x10d/0x110 > [862734.501857] [<ffffffff8033b6fe>] rb_insert_color+0xde/0x110 > [862734.501859] [<ffffffff8022ab83>] enqueue_task+0x13/0x30 > [862734.501861] [<ffffffff8022adf7>] source_load+0x37/0x70 > [862734.501866] [<ffffffff803370aa>] __next_cpu+0x1a/0x30 > [862734.501868] [<ffffffff8022e093>] find_busiest_group+0x193/0x810 > [862734.501871] [<ffffffff8033c76e>] strlcpy+0x4e/0x80 > [862734.501873] [<ffffffff803e7340>] dev_watchdog+0x0/0x210 > [862734.501875] [<ffffffff803e7538>] dev_watchdog+0x1f8/0x210 > [862734.501878] [<ffffffff8024165b>] run_timer_softirq+0x1bb/0x230 > [862734.501881] [<ffffffff8023cf46>] __do_softirq+0x76/0xf0 > [862734.501885] [<ffffffff8020f17b>] profile_pc+0x3b/0x80 > [862734.501888] [<ffffffff8020d51c>] call_softirq+0x1c/0x30 > [862734.501890] [<ffffffff8020ee45>] do_softirq+0x35/0x70 > [862734.501894] [<ffffffff8021ce80>] smp_apic_timer_interrupt+0x80/0xc0 > [862734.501897] [<ffffffff8020cf66>] apic_timer_interrupt+0x66/0x70 > [862734.501898] <EOI> [<ffffffff802133e7>] default_idle+0x27/0x40 > [862734.501904] [<ffffffff8021360a>] c1e_idle+0xba/0x100 > [862734.501906] [<ffffffff8020adf4>] cpu_idle+0x44/0xb0 > [862734.501907] > [862734.501909] ---[ end trace 8fad5965106e3cc6 ]--- > > Complete dmesg here: > http://krogh.cc/~jesper/dmesg-2.6.27.6.txt > > The system is running with bonded interfaces with (lspi out put) > 06:01.0 Ethernet controller: Intel Corporation 82546EB Gigabit Ethernet > Controller (Copper) (rev 03) > 06:01.1 Ethernet controller: Intel Corporation 82546EB Gigabit Ethernet > Controller (Copper) (rev 03) > 06:02.0 Ethernet controller: Intel Corporation 82546EB Gigabit Ethernet > Controller (Copper) (rev 03) > 06:02.1 Ethernet controller: Intel Corporation 82546EB Gigabit Ethernet > Controller (Copper) (rev 03) > > The system is still "fully functional", and I havent notiched anything > wrong, but there sure is a lot of link ups and downs on that bond. > > -- > Jesper
| |