lkml.org 
[lkml]   [2009]   [Jan]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH 1/1] x86: syscalls: sys_setrlimit64/sys_getrlimit64 calls to provide FSIZE limits > 2^32-1
x86: syscalls: sys_setrlimit64/sys_getrlimit64 calls to provide FSIZE  limits > 2^32-1
Problem Description:
The following issue affects the setrlimit() and getrlimit() system calls on
Linux 2.6.13 (and earlier) on x86. The Problem is filed at kernel.org bug 5042
(http://bugzilla.kernel.org/show_bug.cgi?id=5042)

With setrlimit()/getrlimit(), resource limits can not be set > 2^32-1 on
x86 as internally, resource limits are represented in the 'rlimit' structure
(defined in include/linux/resource.h) as unsigned longs, meaning 32 bits on
x86. The most pertinent limit here is RLIMIT_FSIZE, which specifies the
maximum size to which a file can grow: to be useful, this limit must be
represented using a type that is as wide as the type used to represent
file offsets, i.e., as wide as a 64-bit off_t.

Current versions of glibc (e.g., 2.3.5) deal with this situation somewhat
strangely: if a program compiled with FILE_OFFSET_BITS set to 64
(i.e., off_t is thus 'long long' -- 64 bits) tries to set a resource
limit to a value larger than can be represented in a 32-bit unsigned long,then
the glibc wrapper for setrlimit() silently converts the limit value to
RLIM_INFINITY. In other words, the requested resource limit setting is
silently ignored. One could argue that perhaps the glibc wrapper should
give an error, rather than silently turning a very large limit into infinity;
however, the glibc developers instead seem to have decided on the current
behaviour as a means of dealing with what is fundamentally a kernel problem.)

(NOTE: This problem is not merely a theoretical one facing programmers
developing new applications. Since many x86 distributions compile all file
utilities with -D_FILE_OFFSET_BITS=64, this issue can bite end-users as well,
if they expect to be able to set resource limits greater than 2^32-1.)

The solution to this problem would require new setrlimit64() and
getrlimit64() system calls on x86, and the existing 32-bit system calls
would need to be retained so that existing binaries would still run.

Design Approach:
Add two system calls sys_setrlimit64()/sys_getrlimit64().
And a type 'struct rlimit64' to accomodate more no. of limits <= 2^64-1

Implementation Details:
Inclusions: struct rlimit64, struct rlimit64 rlim64[RLIM64_NRLIMITS] to
task_struct

Test Results:
Test results are posted as Comment#6 to
http://bugzilla.kernel.org/show_bug.cgi?id=5042
System Info (uname -a):
Linux infinity 2.6.29-rc2rlim64 #2 SMP
Sat Jan 17 16:57:07 IST 2009 i686 GNU/Linux
CPU: Intel Centrino Duo
getrlimit64: Limits in the Kernel ....
retval : 0
rlim | max64 = ffffffffffffffff
rlim | cur64 = ffffffffffffffff

setrlimit64: setting the following limits ...
retval : 0
rlim | max64 = 1122334455667788
rlim | cur64 = 1122334455667788

getrlimit64: Limits in the Kernel set ....
retval : 0
rlim | max64 = 1122334455667788
rlim | cur64 = 1122334455667788

Signed-off-by: Narendra Prasad Madanapalli <narendramind@gmail.com>
diff -uNrp -X linux-2.6.29-rc2/Documentation/dontdiff linux-2.6.29-rc2/arch/x86/kernel/syscall_table_32.S linux-2.6.29-rc2-rlim64/arch/x86/kernel/syscall_table_32.S
--- linux-2.6.29-rc2/arch/x86/kernel/syscall_table_32.S 2009-01-17 09:54:06.000000000 +0530
+++ linux-2.6.29-rc2-rlim64/arch/x86/kernel/syscall_table_32.S 2009-01-17 19:15:52.000000000 +0530
@@ -332,3 +332,5 @@ ENTRY(sys_call_table)
.long sys_dup3 /* 330 */
.long sys_pipe2
.long sys_inotify_init1
+ .long sys_setrlimit64
+ .long sys_getrlimit64
diff -uNrp -X linux-2.6.29-rc2/Documentation/dontdiff linux-2.6.29-rc2/include/asm-generic/resource.h linux-2.6.29-rc2-rlim64/include/asm-generic/resource.h
--- linux-2.6.29-rc2/include/asm-generic/resource.h 2009-01-17 09:54:59.000000000 +0530
+++ linux-2.6.29-rc2-rlim64/include/asm-generic/resource.h 2009-01-17 19:16:48.000000000 +0530
@@ -46,6 +46,7 @@
#define RLIMIT_RTPRIO 14 /* maximum realtime priority */
#define RLIMIT_RTTIME 15 /* timeout for RT tasks in us */
#define RLIM_NLIMITS 16
+#define RLIM64_NLIMITS 2

/*
* SuS says limits have to be unsigned.
@@ -56,6 +57,9 @@
#ifndef RLIM_INFINITY
# define RLIM_INFINITY (~0UL)
#endif
+#ifndef RLIM64_INFINITY
+# define RLIM64_INFINITY (~0ULL)
+#endif

/*
* RLIMIT_STACK default maximum - some architectures override it:
@@ -89,6 +93,12 @@
[RLIMIT_RTTIME] = { RLIM_INFINITY, RLIM_INFINITY }, \
}

+#define INIT_RLIMITS64 \
+{ \
+ [0] = { RLIM64_INFINITY, RLIM64_INFINITY }, \
+ [RLIMIT_FSIZE] = { RLIM64_INFINITY, RLIM64_INFINITY }, \
+}
+
#endif /* __KERNEL__ */

#endif
diff -uNrp -X linux-2.6.29-rc2/Documentation/dontdiff linux-2.6.29-rc2/include/linux/init_task.h linux-2.6.29-rc2-rlim64/include/linux/init_task.h
--- linux-2.6.29-rc2/include/linux/init_task.h 2009-01-17 09:55:08.000000000 +0530
+++ linux-2.6.29-rc2-rlim64/include/linux/init_task.h 2009-01-17 19:16:55.000000000 +0530
@@ -48,6 +48,7 @@ extern struct fs_struct init_fs;
.posix_timers = LIST_HEAD_INIT(sig.posix_timers), \
.cpu_timers = INIT_CPU_TIMERS(sig.cpu_timers), \
.rlim = INIT_RLIMITS, \
+ .rlim64 = INIT_RLIMITS64, \
}

extern struct nsproxy init_nsproxy;
diff -uNrp -X linux-2.6.29-rc2/Documentation/dontdiff linux-2.6.29-rc2/include/linux/resource.h linux-2.6.29-rc2-rlim64/include/linux/resource.h
--- linux-2.6.29-rc2/include/linux/resource.h 2009-01-17 09:55:04.000000000 +0530
+++ linux-2.6.29-rc2-rlim64/include/linux/resource.h 2009-01-17 19:16:52.000000000 +0530
@@ -45,6 +45,11 @@ struct rlimit {
unsigned long rlim_max;
};

+struct rlimit64 {
+ u64 rlim64_cur;
+ u64 rlim64_max;
+};
+
#define PRIO_MIN (-20)
#define PRIO_MAX 20

diff -uNrp -X linux-2.6.29-rc2/Documentation/dontdiff linux-2.6.29-rc2/include/linux/sched.h linux-2.6.29-rc2-rlim64/include/linux/sched.h
--- linux-2.6.29-rc2/include/linux/sched.h 2009-01-17 09:55:10.000000000 +0530
+++ linux-2.6.29-rc2-rlim64/include/linux/sched.h 2009-01-17 19:16:57.000000000 +0530
@@ -572,6 +572,7 @@ struct signal_struct {
* have no need to disable irqs.
*/
struct rlimit rlim[RLIM_NLIMITS];
+ struct rlimit64 rlim64[RLIM64_NLIMITS];

#ifdef CONFIG_BSD_PROCESS_ACCT
struct pacct_struct pacct; /* per-process accounting information */
diff -uNrp -X linux-2.6.29-rc2/Documentation/dontdiff linux-2.6.29-rc2/kernel/ChangeLog linux-2.6.29-rc2-rlim64/kernel/ChangeLog
--- linux-2.6.29-rc2/kernel/ChangeLog 1970-01-01 05:30:00.000000000 +0530
+++ linux-2.6.29-rc2-rlim64/kernel/ChangeLog 2009-01-17 19:15:50.000000000 +0530
@@ -0,0 +1,10 @@
+2008-01-17 Narendra Prasad <narendramind@gmail.com>
+ Problem Description:
+ The following issue affects the setrlimit() and getrlimit() system calls on Linux 2.6.13 (and earlier) on x86.
+ The Problem is filed at kernel.org bug 5042 (http://bugzilla.kernel.org/show_bug.cgi?id=5042)
+ Design Approach:
+ Add two system calls sys_setrlimit64()/sys_getrlimit64().
+ And a type 'struct rlimit64' to accomodate more no. of limits <= 2^64-1
+ Implementation Details:
+ Inclusions: struct rlimit64, struct rlimit64
+ rlim64[RLIM64_NRLIMITS] to task_struct
diff -uNrp -X linux-2.6.29-rc2/Documentation/dontdiff linux-2.6.29-rc2/kernel/fork.c linux-2.6.29-rc2-rlim64/kernel/fork.c
--- linux-2.6.29-rc2/kernel/fork.c 2009-01-17 09:54:04.000000000 +0530
+++ linux-2.6.29-rc2-rlim64/kernel/fork.c 2009-01-17 19:15:49.000000000 +0530
@@ -862,6 +862,7 @@ static int copy_signal(unsigned long clo

task_lock(current->group_leader);
memcpy(sig->rlim, current->signal->rlim, sizeof sig->rlim);
+ memcpy(sig->rlim64, current->signal->rlim64, sizeof sig->rlim64);
task_unlock(current->group_leader);

posix_cpu_timers_init_group(sig);
diff -uNrp -X linux-2.6.29-rc2/Documentation/dontdiff linux-2.6.29-rc2/kernel/sys.c linux-2.6.29-rc2-rlim64/kernel/sys.c
--- linux-2.6.29-rc2/kernel/sys.c 2009-01-17 09:54:04.000000000 +0530
+++ linux-2.6.29-rc2-rlim64/kernel/sys.c 2009-01-17 19:42:08.000000000 +0530
@@ -1577,6 +1577,132 @@ out:
return 0;
}

+SYSCALL_DEFINE2(getrlimit64, unsigned int, resource,
+ struct rlimit64 __user *, rlim)
+{
+ struct rlimit64 value;
+
+ if (resource >= RLIM_NLIMITS)
+ return -EINVAL;
+
+ if (resource == RLIMIT_FSIZE) {
+ task_lock(current->group_leader);
+ value = current->signal->rlim64[resource];
+ task_unlock(current->group_leader);
+ return copy_to_user(rlim, &value, sizeof(*rlim)) ? -EFAULT : 0;
+ } else {
+ task_lock(current->group_leader);
+ value.rlim64_max = current->signal->rlim[resource].rlim_max;
+ value.rlim64_cur = current->signal->rlim[resource].rlim_cur;
+ task_unlock(current->group_leader);
+ if (value.rlim64_cur == RLIM_INFINITY)
+ value.rlim64_cur = RLIM64_INFINITY;
+ if (value.rlim64_max == RLIM_INFINITY)
+ value.rlim64_max = RLIM64_INFINITY;
+ /* XX: RLIM_SAVED_MAX ? RLIM_SAVED_CUR ? (See Large-File-Summit) */
+ }
+ return copy_to_user(rlim, &value, sizeof(*rlim)) ? -EFAULT : 0;
+}
+
+SYSCALL_DEFINE2(setrlimit64, unsigned int, resource,
+ struct rlimit64 __user *, rlim)
+{
+ struct rlimit64 new_rlim;
+ struct rlimit *old_rlim, new_value;
+ unsigned long it_prof_secs;
+ int retval;
+
+ if (resource >= RLIM_NLIMITS)
+ return -EINVAL;
+ if (copy_from_user(&new_rlim, rlim, sizeof(*rlim)))
+ return -EFAULT;
+
+ if (resource == RLIMIT_FSIZE) {
+ struct rlimit64 *old_rlim;
+ struct rlimit *old_value;
+
+ old_rlim = current->signal->rlim64 + resource;
+ if (((new_rlim.rlim64_cur > old_rlim->rlim64_max) ||
+ (new_rlim.rlim64_max > old_rlim->rlim64_max)) &&
+ !capable(CAP_SYS_RESOURCE))
+ return -EPERM;
+ *old_rlim = new_rlim;
+ if (new_rlim.rlim64_cur > RLIM_INFINITY)
+ new_rlim.rlim64_cur = RLIM_INFINITY;
+ if (new_rlim.rlim64_max > RLIM_INFINITY)
+ new_rlim.rlim64_max = RLIM_INFINITY;
+
+ task_lock(current->group_leader);
+ old_value = (current->signal->rlim + resource);
+ old_value->rlim_max = new_rlim.rlim64_max;
+ old_value->rlim_cur = new_rlim.rlim64_cur;
+ task_unlock(current->group_leader);
+
+ return 0;
+ }
+
+ old_rlim = current->signal->rlim + resource;
+ if (new_rlim.rlim64_cur > RLIM_INFINITY)
+ new_rlim.rlim64_cur = RLIM_INFINITY;
+ if (new_rlim.rlim64_max > RLIM_INFINITY)
+ new_rlim.rlim64_max = RLIM_INFINITY;
+ if (((new_rlim.rlim64_cur > old_rlim->rlim_max) ||
+ (new_rlim.rlim64_max > old_rlim->rlim_max)) &&
+ !capable(CAP_SYS_RESOURCE))
+ return -EPERM;
+ if (resource == RLIMIT_NOFILE) {
+ if (new_rlim.rlim64_cur > INR_OPEN ||
+ new_rlim.rlim64_max > INR_OPEN)
+ return -EPERM;
+ }
+ new_value.rlim_max = new_rlim.rlim64_max;
+ new_value.rlim_cur = new_rlim.rlim64_cur;
+ retval = security_task_setrlimit(resource, &new_value);
+ if (retval)
+ return retval;
+
+ if (resource == RLIMIT_CPU && new_value.rlim_cur == 0) {
+ /*
+ * The caller is asking for an immediate RLIMIT_CPU
+ * expiry. But we use the zero value to mean "it was
+ * never set". So let's cheat and make it one second
+ * instead
+ */
+ new_value.rlim_cur = 1;
+ }
+
+ task_lock(current->group_leader);
+ *old_rlim = new_value;
+ task_unlock(current->group_leader);
+
+ if (resource != RLIMIT_CPU)
+ goto out;
+
+ /*
+ * RLIMIT_CPU handling. Note that the kernel fails to return an error
+ * code if it rejected the user's attempt to set RLIMIT_CPU. This is a
+ * very long-standing error, and fixing it now risks breakage of
+ * applications, so we live with it
+ */
+ if (new_value.rlim_cur == RLIM_INFINITY)
+ goto out;
+
+ it_prof_secs = cputime_to_secs(current->signal->it_prof_expires);
+ if (it_prof_secs == 0 || new_value.rlim_cur <= it_prof_secs) {
+ unsigned long rlim_cur = new_value.rlim_cur;
+ cputime_t cputime;
+
+ cputime = secs_to_cputime(rlim_cur);
+ read_lock(&tasklist_lock);
+ spin_lock_irq(&current->sighand->siglock);
+ set_process_cpu_timer(current, CPUCLOCK_PROF, &cputime, NULL);
+ spin_unlock_irq(&current->sighand->siglock);
+ read_unlock(&tasklist_lock);
+ }
+out:
+ return 0;
+}
+
/*
* It would make sense to put struct rusage in the task_struct,
* except that would make the task_struct be *really big*. After

\
 
 \ /
  Last update: 2009-01-23 19:01    [W:0.067 / U:0.492 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site