Messages in this thread | | | Date | Fri, 2 Jan 2009 21:18:35 +0530 | From | "Jaswinder Singh Rajput" <> | Subject | Re: BUG - 2.4.37 fealnx.c NETDEV WATCHDOG: eth0: transmit timed out |
| |
Hello Willy,
On 1/2/09, Willy Tarreau <w@1wt.eu> wrote: > On Fri, Jan 02, 2009 at 08:10:50PM +0530, Jaswinder Singh Rajput wrote: >> Now I tested fealnx driver from 2.4.37 (2.4 git). I am still getting >> "NETDEV WATCHDOG: eth0: transmit timed out". Please let me know how >> can I fix this problem. > > Well, I don't have such an adapter, but most of the times I encountered > a similar message with older 10/100 adapters, it was caused by a link > status issue or duplex mismatch. > I think I am also getting same problem, what is the solution.
> Could you check with ethtool or mii-diag that the link status is correct > and 100 Mbps/Full duplex (assuming you're connected to a switch) ? >
Output of mii-diag -v : eth0: 10 Mbit, half duplex, no link product info: vendor 00:00:00, model 0 rev 0 basic mode: 10 Mbit, half duplex basic status: no link capabilities: advertising:
This is the output from very old machine Pentium MMX with Redhat 7.1
I also tested different RTL8139 adapters on different machines with different kernels and different kind of switches and Hubs but I get same error on all the machines. But my other Network devices are working perfectly.
Thank you, JSR
| |