lkml.org 
[lkml]   [2008]   [Sep]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 9/9] ASoC: Blackfin: add Blackfin arch ASoC Kconfig and Makefile
Date
From: Cliff Cai <cliff.cai@analog.com>

Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
---
sound/soc/blackfin/Kconfig | 85 +++++++++++++++++++++++++++++++++++++++++++
sound/soc/blackfin/Makefile | 20 ++++++++++
2 files changed, 105 insertions(+), 0 deletions(-)
create mode 100644 sound/soc/blackfin/Kconfig
create mode 100644 sound/soc/blackfin/Makefile

diff --git a/sound/soc/blackfin/Kconfig b/sound/soc/blackfin/Kconfig
new file mode 100644
index 0000000..f98331d
--- /dev/null
+++ b/sound/soc/blackfin/Kconfig
@@ -0,0 +1,85 @@
+config SND_BF5XX_I2S
+ tristate "SoC I2S Audio for the ADI BF5xx chip"
+ depends on BLACKFIN && SND_SOC
+ help
+ Say Y or M if you want to add support for codecs attached to
+ the Blackfin SPORT (synchronous serial ports) interface in I2S
+ mode (supports single stereo In/Out).
+ You will also need to select the audio interfaces to support below.
+
+config SND_BF5XX_SOC_SSM2602
+ tristate "SoC SSM2602 Audio support for BF52x ezkit"
+ depends on SND_BF5XX_I2S
+ select SND_BF5XX_SOC_I2S
+ select SND_SOC_SSM2602
+ select I2C
+ select I2C_BLACKFIN_TWI
+ help
+ Say Y if you want to add support for SoC audio on BF527-EZKIT.
+
+config SND_BF5XX_AC97
+ tristate "SoC AC97 Audio for the ADI BF5xx chip"
+ depends on BLACKFIN && SND_SOC
+ help
+ Say Y or M if you want to add support for codecs attached to
+ the Blackfin SPORT (synchronous serial ports) interface in slot 16
+ mode (pseudo AC97 interface).
+ You will also need to select the audio interfaces to support below.
+
+ Note:
+ AC97 codecs which do not implment the slot-16 mode will not function
+ properly with this driver. This driver is known to work with the
+ Analog Devices line of AC97 codecs.
+
+config SND_MMAP_SUPPORT
+ bool "Enable MMAP Support"
+ depends on SND_BF5XX_AC97
+ default y
+ help
+ Say y if you want AC97 driver to support mmap mode.
+ We introduce an intermediate buffer to simulate mmap.
+
+config SND_BF5XX_SOC_SPORT
+ tristate
+
+config SND_BF5XX_SOC_I2S
+ tristate
+ select SND_BF5XX_SOC_SPORT
+
+config SND_BF5XX_SOC_AC97
+ tristate
+ select AC97_BUS
+ select SND_SOC_AC97_BUS
+ select SND_BF5XX_SOC_SPORT
+
+config SND_BF5XX_SOC_AD1980
+ tristate "SoC AD1980/1 Audio support for BF5xx"
+ depends on SND_BF5XX_AC97
+ select SND_BF5XX_SOC_AC97
+ select SND_SOC_AD1980
+ help
+ Say Y if you want to add support for SoC audio on BF5xx STAMP/EZKIT.
+
+config SND_BF5XX_SPORT_NUM
+ int "Set a SPORT for Sound chip"
+ depends on (SND_BF5XX_I2S || SND_BF5XX_AC97)
+ range 0 3 if BF54x
+ range 0 1 if (BF53x || BF561)
+ default 0
+ help
+ Set the correct SPORT for sound chip.
+
+config SND_BF5XX_HAVE_COLD_RESET
+ bool "BOARD has COLD Reset GPIO"
+ depends on SND_BF5XX_AC97
+ default y if BFIN548_EZKIT
+ default n if !BFIN548_EZKIT
+
+config SND_BF5XX_RESET_GPIO_NUM
+ int "Set a GPIO for cold reset"
+ depends on SND_BF5XX_HAVE_COLD_RESET
+ range 0 159
+ default 19 if BFIN548_EZKIT
+ default 5 if BFIN537_STAMP
+ help
+ Set the correct GPIO for RESET the sound chip.
diff --git a/sound/soc/blackfin/Makefile b/sound/soc/blackfin/Makefile
new file mode 100644
index 0000000..9ea8bd9
--- /dev/null
+++ b/sound/soc/blackfin/Makefile
@@ -0,0 +1,20 @@
+# Blackfin Platform Support
+snd-bf5xx-ac97-objs := bf5xx-ac97-pcm.o
+snd-bf5xx-i2s-objs := bf5xx-i2s-pcm.o
+snd-soc-bf5xx-sport-objs := bf5xx-sport.o
+snd-soc-bf5xx-ac97-objs := bf5xx-ac97.o
+snd-soc-bf5xx-i2s-objs := bf5xx-i2s.o
+
+obj-$(CONFIG_SND_BF5XX_AC97) += snd-bf5xx-ac97.o
+obj-$(CONFIG_SND_BF5XX_I2S) += snd-bf5xx-i2s.o
+obj-$(CONFIG_SND_BF5XX_SOC_SPORT) += snd-soc-bf5xx-sport.o
+obj-$(CONFIG_SND_BF5XX_SOC_AC97) += snd-soc-bf5xx-ac97.o
+obj-$(CONFIG_SND_BF5XX_SOC_I2S) += snd-soc-bf5xx-i2s.o
+
+# Blackfin Machine Support
+snd-ad1980-objs := bf5xx-ad1980.o
+snd-ssm2602-objs := bf5xx-ssm2602.o
+
+
+obj-$(CONFIG_SND_BF5XX_SOC_AD1980) += snd-ad1980.o
+obj-$(CONFIG_SND_BF5XX_SOC_SSM2602) += snd-ssm2602.o
--
1.5.6

\
 
 \ /
  Last update: 2008-09-05 12:27    [W:0.068 / U:0.204 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site