lkml.org 
[lkml]   [2008]   [Sep]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RFC PATCH 03/12] e1000e: reset swflag after resetting hardware
Date
in the process of debugging things, noticed that the swflag is not reset
by the driver after reset, and the swflag is probably not reset unless
management firmware clears it after 100ms.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
---

drivers/net/e1000e/ich8lan.c | 3 +++
1 files changed, 3 insertions(+), 0 deletions(-)

diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c
index 9e38452..a076079 100644
--- a/drivers/net/e1000e/ich8lan.c
+++ b/drivers/net/e1000e/ich8lan.c
@@ -1720,6 +1720,9 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw)
ew32(CTRL, (ctrl | E1000_CTRL_RST));
msleep(20);

+ /* release the swflag because it is not reset by hardware reset */
+ e1000_release_swflag_ich8lan(hw);
+
ret_val = e1000e_get_auto_rd_done(hw);
if (ret_val) {
/*


\
 
 \ /
  Last update: 2008-09-30 05:23    [W:0.111 / U:3.092 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site