lkml.org 
[lkml]   [2008]   [Sep]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH 2/5] ide: ->ide_dma_clear_irq() -> ->clear_irq()
Date
On Monday 15 September 2008 15:11:21 Sergei Shtylyov wrote:
> Hello, I wrote:
>
> >> * Rename ->ide_dma_clear_irq method to ->clear_irq
> >> and move it from ide_hwif_t to struct ide_port_ops.
> >>
> >> * Move ->waiting_for_dma check inside ->clear_irq method.
> >>
> >> * Move ->dma_base check inside ->clear_irq method.
> >>
> >> piix.c:
> >> * Add ich_port_ops and remove init_hwif_ich() wrapper.
> >>
> >> There should be no functional changes caused by this patch.
> >>
> >
> > Good. I think it's worth implementing this method in at least
> > cmd64x.c which actually reads the IDE interrupt latch bits
> > (independent from the DMA interrupt status) in the dma_test_irq()
> > methods but never clears them, so the latches may reflect a
> > non-current state of the IDE interrupt...
>
> I forgot that it does clear them in its dma_end() methods (which I
> myself have reworked :-).
> It seems however that at least for SFF-8038 compatibles, it makes
> sense to leave it that way since INTRQ might be asserted while BMIDE
> interrupt bit is not, so the interrupt latch would need clearing even on
> DMA timeout...
>
> > It may also be worth considering turning this method into
> > test-and-clear, so that we can get the actual IDE interrupt state on
> > the chips that implement this...
>
> Probably might add the test_irq() method to be called on
> !hwif->waiting_for_dma. Cleraing the status at once seems impractical...

Or we can test for ->waiting_for_dma inside ->test_irq.

> >> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
> >
> > Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
>
> Not feeling sure about this patch -- ->waiting_for_dma probably
> should've been left where it was...

Well, it doesn't change behavior and I think having ->clear_irq method
independent from the transfer mode is a preffered approach.

Thanks,
Bart


\
 
 \ /
  Last update: 2008-09-16 00:33    [W:0.095 / U:0.280 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site