lkml.org 
[lkml]   [2008]   [Sep]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH 02/18] lirc serial port receiver/transmitter device driver
Date
On Saturday 13 September 2008 02:26, Janne Grunau wrote:
> On Friday 12 September 2008 18:24:33 Jarod Wilson wrote:
> > > I just want to thank you very much for your work and give you my
> > > Tested-By. Todays git (b2e9c18a32423310a309f94ea5a659c4bb264378)
> > > works well here with lirc-0.8.3 userspace on a Pentium
> > > 3/i815-system.
> >
> > Oh good! I haven't broken anything further w/my changes up to
> > b2e9c18... ;) I've got another slew of updates to lirc_serial still
> > pending though
>
> I hope I haven't broken anything with my lirc_dev changes. I doubt I'll
> have a change to test it before monday.

Unfortunately, you did. Commit ea74897 (port lirc to dynamic device numbers)
broke things.
This is what ea74897 and further (latest tested was dd13cc7) are telling me:

$ insmod drivers/input/lirc/lirc_dev.ko
$ insmod drivers/input/lirc/lirc_serial.ko
insmod: error inserting 'drivers/input/lirc/lirc_serial.ko': -1 Input/output
error
$ dmesg | tail
lirc_dev: IR Remote Control driver registered, major 253
lirc_serial: auto-detected active low receiver
lirc_dev: lirc_register_driver: sample_rate: 0
lirc_serial: register_chrdev failed!


There has also been a compile issue in the meanwhile, introduced with 95efa30
(inb/outb and readb/writeb deal in u8 types), but this is gone with todays
git pull :)


I'll keep on testing (unfortunately only at weekends),
regards, Stefan


\
 
 \ /
  Last update: 2008-09-13 10:45    [W:0.145 / U:0.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site