[lkml]   [2008]   [Aug]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
    SubjectRe: 2.6.27rc1 cannot boot more than 8CPUs
    On Wed, Aug 6, 2008 at 4:09 AM, Jeff Chua <> wrote:
    > On Wed, Aug 6, 2008 at 5:42 PM, Jeff Chua <> wrote:
    >>>> CONFIG_X86_BIGSMP=y
    >>>> 8 more cpu need bigsmp mode.
    >> Just found it under " Subarchitecture Type (Generic architecture)",
    >> and then it shows the CONFIG_X86_BIGSMP option.
    > It works. Booted with 16CPUs. 32GB RAM.
    > CPU0 L7345 1.86GHz 0C
    > CPU1 L7345 1.86GHz 0C
    > CPU2 L7345 1.86GHz 0C
    > CPU3 L7345 1.86GHz 0C
    > CPU4 L7345 1.86GHz 0C
    > CPU5 L7345 1.86GHz 0C
    > CPU6 L7345 1.86GHz 0C
    > CPU7 L7345 1.86GHz 0C
    > CPU8 L7345 1.86GHz 0C
    > CPU9 L7345 1.86GHz 0C
    > CPU10 L7345 1.86GHz 0C
    > CPU11 L7345 1.86GHz 0C
    > CPU12 L7345 1.86GHz 0C
    > CPU13 L7345 1.86GHz 0C
    > CPU14 L7345 1.86GHz 0C
    > CPU15 L7345 1.86GHz 0C
    > So, but setting the config not obvious. And should CONFIG_X86_PC be
    > considered as well as CONFIG_X86_GENERICARCH?
    > With CONFIG_X86_PC, I can set CONFIG_SPARSEMEM=y.
    > I'm using the patch below to enable sparsemem instead of flatmem, but don't
    > know what impact it has. System booted and running.
    > It would be nice to automatically default CONFIG_X86_BIGSMP with CPUs > 8.
    > But I don't know to do that.

    actually x86_pc is one mode of genericarch..., genericarch already
    could detect pc, bigsmp, and numaq, es7000, bigsmp, visew..

    hope later we can change mach_default to default. but embed guys may
    want to keep it as seperated one.

    in the dmesg when booting x86_pc only, we already have warning to let
    you set bigsmp if you have 8 more cpus.


     \ /
      Last update: 2008-08-06 18:17    [W:0.023 / U:37.012 seconds]
    ©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site