lkml.org 
[lkml]   [2008]   [Aug]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH 1/2] ext3: add an option to control error handling on file data (another ver.)
Here is the 'data_err=ignore is the default' version of the PATCH 1/2.

Thanks,
Hidehiro Kawai


Subject: [PATCH 1/2] ext3: add an option to control error handling on file data

If the journal doesn't abort when it gets an IO error in file data
blocks, the file data corruption will spread silently. Because
most of applications and commands do buffered writes without fsync(),
they don't notice the IO error. It's scary for mission critical
systems. On the other hand, if the journal aborts whenever it gets
an IO error in file data blocks, the system will easily become
inoperable. So this patch introduces a filesystem option to
determine whether it aborts the journal or just call printk() when
it gets an IO error in file data.

If you mount a ext3 fs with data_err=abort option, it aborts on file
data write error. If you mount it with data_err=ignore, it doesn't
abort, just call printk(). data_err=ignore is the default.

Signed-off-by: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
---
Documentation/filesystems/ext3.txt | 5 +++++
fs/ext3/super.c | 16 ++++++++++++++++
fs/jbd/commit.c | 2 ++
include/linux/ext3_fs.h | 2 ++
include/linux/jbd.h | 3 +++
5 files changed, 28 insertions(+)

Index: linux-2.6.27-rc1/Documentation/filesystems/ext3.txt
===================================================================
--- linux-2.6.27-rc1.orig/Documentation/filesystems/ext3.txt
+++ linux-2.6.27-rc1/Documentation/filesystems/ext3.txt
@@ -96,6 +96,11 @@ errors=remount-ro(*) Remount the filesys
errors=continue Keep going on a filesystem error.
errors=panic Panic and halt the machine if an error occurs.

+data_err=ignore(*) Just print an error message if an error occurs
+ in a file data buffer in ordered mode.
+data_err=abort Abort the journal if an error occurs in a file
+ data buffer in ordered mode.
+
grpid Give objects the same group ID as their creator.
bsdgroups

Index: linux-2.6.27-rc1/fs/ext3/super.c
===================================================================
--- linux-2.6.27-rc1.orig/fs/ext3/super.c
+++ linux-2.6.27-rc1/fs/ext3/super.c
@@ -625,6 +625,9 @@ static int ext3_show_options(struct seq_
else if (test_opt(sb, DATA_FLAGS) == EXT3_MOUNT_WRITEBACK_DATA)
seq_puts(seq, ",data=writeback");

+ if (test_opt(sb, DATA_ERR_ABORT))
+ seq_puts(seq, ",data_err=abort");
+
ext3_show_quota_options(seq, sb);

return 0;
@@ -754,6 +757,7 @@ enum {
Opt_reservation, Opt_noreservation, Opt_noload, Opt_nobh, Opt_bh,
Opt_commit, Opt_journal_update, Opt_journal_inum, Opt_journal_dev,
Opt_abort, Opt_data_journal, Opt_data_ordered, Opt_data_writeback,
+ Opt_data_err_abort, Opt_data_err_ignore,
Opt_usrjquota, Opt_grpjquota, Opt_offusrjquota, Opt_offgrpjquota,
Opt_jqfmt_vfsold, Opt_jqfmt_vfsv0, Opt_quota, Opt_noquota,
Opt_ignore, Opt_barrier, Opt_err, Opt_resize, Opt_usrquota,
@@ -796,6 +800,8 @@ static match_table_t tokens = {
{Opt_data_journal, "data=journal"},
{Opt_data_ordered, "data=ordered"},
{Opt_data_writeback, "data=writeback"},
+ {Opt_data_err_abort, "data_err=abort"},
+ {Opt_data_err_ignore, "data_err=ignore"},
{Opt_offusrjquota, "usrjquota="},
{Opt_usrjquota, "usrjquota=%s"},
{Opt_offgrpjquota, "grpjquota="},
@@ -1011,6 +1017,12 @@ static int parse_options (char *options,
sbi->s_mount_opt |= data_opt;
}
break;
+ case Opt_data_err_abort:
+ set_opt(sbi->s_mount_opt, DATA_ERR_ABORT);
+ break;
+ case Opt_data_err_ignore:
+ clear_opt(sbi->s_mount_opt, DATA_ERR_ABORT);
+ break;
#ifdef CONFIG_QUOTA
case Opt_usrjquota:
qtype = USRQUOTA;
@@ -1986,6 +1998,10 @@ static void ext3_init_journal_params(str
journal->j_flags |= JFS_BARRIER;
else
journal->j_flags &= ~JFS_BARRIER;
+ if (test_opt(sb, DATA_ERR_ABORT))
+ journal->j_flags |= JFS_ABORT_ON_SYNCDATA_ERR;
+ else
+ journal->j_flags &= ~JFS_ABORT_ON_SYNCDATA_ERR;
spin_unlock(&journal->j_state_lock);
}

Index: linux-2.6.27-rc1/include/linux/ext3_fs.h
===================================================================
--- linux-2.6.27-rc1.orig/include/linux/ext3_fs.h
+++ linux-2.6.27-rc1/include/linux/ext3_fs.h
@@ -380,6 +380,8 @@ struct ext3_inode {
#define EXT3_MOUNT_QUOTA 0x80000 /* Some quota option set */
#define EXT3_MOUNT_USRQUOTA 0x100000 /* "old" user quota */
#define EXT3_MOUNT_GRPQUOTA 0x200000 /* "old" group quota */
+#define EXT3_MOUNT_DATA_ERR_ABORT 0x400000 /* Abort on file data write
+ * error in ordered mode */

/* Compatibility, for having both ext2_fs.h and ext3_fs.h included at once */
#ifndef _LINUX_EXT2_FS_H
Index: linux-2.6.27-rc1/include/linux/jbd.h
===================================================================
--- linux-2.6.27-rc1.orig/include/linux/jbd.h
+++ linux-2.6.27-rc1/include/linux/jbd.h
@@ -816,6 +816,9 @@ struct journal_s
#define JFS_FLUSHED 0x008 /* The journal superblock has been flushed */
#define JFS_LOADED 0x010 /* The journal superblock has been loaded */
#define JFS_BARRIER 0x020 /* Use IDE barriers */
+#define JFS_ABORT_ON_SYNCDATA_ERR 0x040 /* Abort the journal on file
+ * data write error in ordered
+ * mode */

/*
* Function declarations for the journaling transaction and buffer
Index: linux-2.6.27-rc1/fs/jbd/commit.c
===================================================================
--- linux-2.6.27-rc1.orig/fs/jbd/commit.c
+++ linux-2.6.27-rc1/fs/jbd/commit.c
@@ -482,6 +482,8 @@ void journal_commit_transaction(journal_
printk(KERN_WARNING
"JBD: Detected IO errors while flushing file data "
"on %s\n", bdevname(journal->j_fs_dev, b));
+ if (journal->j_flags & JFS_ABORT_ON_SYNCDATA_ERR)
+ journal_abort(journal, err);
err = 0;
}




\
 
 \ /
  Last update: 2008-08-05 08:11    [W:0.552 / U:0.092 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site