lkml.org 
[lkml]   [2008]   [Aug]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: [PATCH 2.6.26.7-rc4] ata_piix: IDE Mode SATA patch for Intel Ibex Peak DeviceIDs
    Heasley, Seth wrote:
    >> -----Original Message-----
    >> From: Heasley, Seth
    >> Sent: Wednesday, August 27, 2008 4:40 PM
    >> To: jgarzik@pobox.com; linux-ide@vger.kernel.org; linux-
    >> kernel@vger.kernel.org; htejun@gmail.com
    >> Cc: Heasley, Seth
    >> Subject: [PATCH 2.6.26.7-rc4] ata_piix: IDE Mode SATA patch for Intel Ibex
    >> Peak DeviceIDs
    >>
    >> This patch updates the Intel Ibex Peak (PCH) IDE mode SATA Controller
    >> DeviceIDs.
    >>
    >> Signed-off-by: Seth Heasley <seth.heasley@intel.com>
    >>
    >> --- linux-2.6/drivers/ata/ata_piix.c.orig 2008-08-27
    >> 11:32:28.000000000 -0700
    >> +++ linux-2.6/drivers/ata/ata_piix.c 2008-08-27 11:47:59.000000000 -0700
    >> @@ -278,12 +278,15 @@
    >> /* SATA Controller IDE (PCH) */
    >> { 0x8086, 0x3b20, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
    >> /* SATA Controller IDE (PCH) */
    >> + { 0x8086, 0x3b21, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
    >> + /* SATA Controller IDE (PCH) */
    >> { 0x8086, 0x3b26, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
    >> /* SATA Controller IDE (PCH) */
    >> + { 0x8086, 0x3b28, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
    >> + /* SATA Controller IDE (PCH) */
    >> { 0x8086, 0x3b2d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
    >> /* SATA Controller IDE (PCH) */
    >> { 0x8086, 0x3b2e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
    >> -
    >> { } /* terminate list */
    >> };
    >
    > Typo in the subject line. Should read 2.6.27-rc4. This was built against http://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6

    A process note...

    If you are building against torvalds/linux-2.6.git -- a good thing --
    then it is helpful to include the top-most commit id in your message [if
    you feel it is relevant information].

    For patches, meta-information like commit ids or special instructions to
    the maintainer can be included following a "---" separator (on a line by
    itself).

    As an example, see this patch from Tejun, which includes a diffstat(1)
    output and note about MAXTOR in the meta-information area of the patch:

    http://marc.info/?l=linux-ide&m=118835646130927&w=2

    Our tools are specially programmed to exclude the meta-information from
    the text copied into the permanent kernel linux-2.6.git changelog.

    Jeff





    \
     
     \ /
      Last update: 2008-08-28 01:59    [W:0.024 / U:92.980 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site