lkml.org 
[lkml]   [2008]   [Aug]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: HPET regression in 2.6.26 versus 2.6.25 -- found another user with the same regression
On Sat, Aug 23, 2008 at 1:15 PM, Rufus & Azrael
<rufus-azrael@numericable.fr> wrote:
> Yinghai Lu wrote:
>>
>> On Sat, Aug 23, 2008 at 12:40 PM, Rufus& Azrael
>> <rufus-azrael@numericable.fr> wrote:
>>
>>>
>>> Yinghai Lu wrote:
>>>
>>>>
>>>> On Sat, Aug 23, 2008 at 11:26 AM, Rufus& Azrael
>>>> <rufus-azrael@numericable.fr> wrote:
>>>>
>>>>
>>>>>>
>>>>>> On Sat, Aug 23, 2008 at 4:58 AM, David
>>>>>> Witbrodt<dawitbro@sbcglobal.net>
>>>>>> wrote:
>>>>>>
>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>>
>>>>>>>> please send out after booting with hpet=disable
>>>>>>>> lspci -tv
>>>>>>>> lspci -vvxxx
>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>> Info attached:
>>>>>>>
>>>>>>>
>>>>>>
>>>>>> 00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 13)
>>>>>> Subsystem: Elitegroup Computer Systems Device 2621
>>>>>> Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
>>>>>> ParErr-
>>>>>> Stepping- SERR- FastB2B- DisINTx+
>>>>>> Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium>TAbort-
>>>>>> <TAbort-<MAbort->SERR-<PERR- INTx-
>>>>>> Region 0: I/O ports at fa00 [size=16]
>>>>>> Region 1: Memory at 80000000 (32-bit, non-prefetchable)
>>>>>> [size=1K]
>>>>>> Capabilities: [b0] HyperTransport: MSI Mapping Enable- Fixed+
>>>>>> Kernel driver in use: piix4_smbus
>>>>>> 00: 02 10 85 43 03 04 30 02 13 00 05 0c 00 00 80 00
>>>>>> 10: 01 fa 00 00 00 00 00 80 00 00 00 00 00 00 00 00
>>>>>> 20: 00 00 00 00 00 00 00 00 00 00 00 00 19 10 21 26
>>>>>> 30: 00 00 00 00 b0 00 00 00 00 00 00 00 00 00 00 00
>>>>>> 40: d4 3b 00 05 00 00 00 00 0f ff 00 00 00 00 00 00
>>>>>> 50: f0 01 f0 0e f0 0f f0 07 11 0b f0 0f 00 00 00 00
>>>>>> 60: 01 00 24 00 bf fd de 8f 3f 90 00 00 20 00 00 00
>>>>>> 70: 00 01 00 00 08 00 c0 fe ff 6e 00 00 00 00 f0 0f
>>>>>> 80: f0 0a f0 0f 00 00 00 00 00 00 00 00 8c 00 00 80
>>>>>> 90: 01 fa 00 00 fa de ff 00 00 00 00 00 00 00 00 00
>>>>>> a0: 00 00 ff ff ff ff f0 08 ff fd 12 02 16 7b 20 00
>>>>>> b0: 08 00 02 a8 00 00 00 00 00 00 00 00 f0 0f 08 1a
>>>>>> c0: ff ff ff ff 00 00 00 00 00 00 00 00 00 00 00 00
>>>>>> d0: 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
>>>>>> e0: 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>>>>> f0: d8 0c 00 00 00 00 44 00 00 00 00 00 aa 00 10 01
>>>>>> it seems kernel update BAR1 from 0xfed00000 to 0x80000000 after it can
>>>>>> not give 0xfed00000 to that device.
>>>>>> please try attached patch, and send out lspci -vvxxxx again.
>>>>>> YH
>>>>>> [PATCH] x86: protect hpet in BAR for one ATI chipset
>>>>>>
>>>>>> so avoid kernel don't allocate nre resource for it because it can not
>>>>>> allocate the old
>>>>>> address from BIOS.
>>>>>>
>>>>>> the same way like some IO APIC address in BAR handling
>>>>>>
>>>>>> Signed-off-by: Yinghai Lu<yhlu.kenrel@gmail.com>
>>>>>>
>>>>>> ---
>>>>>> drivers/pci/quirks.c | 16 ++++++++++++++++
>>>>>> 1 file changed, 16 insertions(+)
>>>>>> Index: linux-2.6/drivers/pci/quirks.c
>>>>>> ===================================================================
>>>>>> --- linux-2.6.orig/drivers/pci/quirks.c
>>>>>> +++ linux-2.6/drivers/pci/quirks.c
>>>>>> @@ -1918,6 +1918,22 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_B
>>>>>> PCI_DEVICE_ID_NX2_5709S,
>>>>>> quirk_brcm_570x_limit_vpd);
>>>>>>
>>>>>> +static void __init quirk_hpet_in_bar(struct pci_dev *pdev)
>>>>>> +{
>>>>>> + int i;
>>>>>> + unsigned int base, size;
>>>>>> +
>>>>>> + /* the BAR1 is the location of the HPET...we must
>>>>>> + * not touch this, so forcibly insert it into the resource
>>>>>> tree
>>>>>> */
>>>>>> + base = pci_resource_start(pdev, 1);
>>>>>> + size = pci_resource_len(pdev, 1);
>>>>>> + if (base&& size) {
>>>>>> + insert_resource(&iomem_resource,&pdev->resource[1]);
>>>>>> + dev_info(&dev->dev, "HPET at %04x-%04x\n", name, base,
>>>>>> base + size - 1);
>>>>>> + }
>>>>>> +}
>>>>>> +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, 0x3485,
>>>>>> quirk_hpet_in_bar);
>>>>>> +
>>>>>> #ifdef CONFIG_PCI_MSI
>>>>>> /* Some chipsets do not support MSI. We cannot easily rely on setting
>>>>>> * PCI_BUS_FLAGS_NO_MSI in its bus flags because there are actually
>>>>>>
>>>>>>
>>>>>
>>>>> Hi Yinghai,
>>>>>
>>>>>
>>>>> Your patch seems to be broken, see :
>>>>>
>>>>>
>>>>>
>>>>>>
>>>>>> CC drivers/pci/quirks.o
>>>>>> drivers/pci/quirks.c: In function 'quirk_hpet_in_bar':
>>>>>> drivers/pci/quirks.c:1804: erreur: 'dev' undeclared (first use in this
>>>>>> function)
>>>>>> drivers/pci/quirks.c:1804: erreur: (Each undeclared identifier is
>>>>>> reported
>>>>>> only once
>>>>>> drivers/pci/quirks.c:1804: erreur: for each function it appears in.)
>>>>>> drivers/pci/quirks.c:1804: erreur: 'name' undeclared (first use in
>>>>>> this
>>>>>> function)
>>>>>> drivers/pci/quirks.c:1804: attention : trop d'arguments pour le format
>>>>>> drivers/pci/quirks.c:1795: attention : unused variable 'i'
>>>>>> make[2]: *** [drivers/pci/quirks.o] Erreur 1
>>>>>>
>>>>>>
>>>>
>>>> please check v2.
>>>>
>>>> YH
>>>>
>>>>
>>>
>>> Thanks Yinghai,
>>>
>>> Your patch applied, I attach lspci -vvxxxx.
>>>
>>> Regards.
>>>
>>>
>>> 00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 14)
>>> Subsystem: Micro-Star International Co., Ltd. Device 7327
>>> Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
>>> ParErr-
>>> Stepping- SERR- FastB2B- DisINTx+
>>> Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium>TAbort-
>>> <TAbort-<MAbort->SERR-<PERR- INTx-
>>> Region 0: I/O ports at 0b00 [size=16]
>>> Capabilities: [b0] HyperTransport: MSI Mapping Enable- Fixed+
>>> Kernel driver in use: piix4_smbus
>>> 00: 02 10 85 43 01 04 30 02 14 00 05 0c 00 00 80 00
>>> 10: 01 0b 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> 20: 00 00 00 00 00 00 00 00 00 00 00 00 62 14 27 73
>>> 30: 00 00 00 00 b0 00 00 00 00 00 00 00 00 00 00 00
>>> 40: d4 2b 00 05 00 00 00 00 0f ff 00 00 00 00 00 00
>>> 50: 10 01 00 00 00 00 80 08 11 0b f0 0f 00 00 00 00
>>> 60: 01 00 24 00 bf fd 9e 83 3f 90 00 00 20 00 00 00
>>> 70: 00 01 00 00 08 00 c0 fe ff 2e 00 00 00 00 f0 0f
>>> 80: f4 0a f0 0f 00 00 00 00 00 00 00 00 8c 00 00 80
>>> 90: 01 0b 00 00 3b de ff 00 00 00 00 00 00 00 00 00
>>> a0: 00 00 ff ff ff ff f0 08 02 f0 02 00 16 79 00 18
>>> b0: 08 00 02 a8 00 00 00 00 00 00 00 00 f0 0f 08 1a
>>> c0: ff ff ff ff 00 00 00 00 00 00 00 00 00 00 00 00
>>> d0: 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> e0: 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> f0: d8 0c 00 00 00 00 44 00 00 00 00 00 aa 00 10 01
>>>
>>
>> bios didn't set HPET in BAR1?
>>
>> YH
>>
>>
>
> Yinghai,
>
> How do I check this ?
>

it seems that you BIOS have HPET in acpi tables, but didn't set that
in BAR1 of 00:14.0

or BIOS have set one magic bit to hide BAR1 to OS.

please check if your hpet works. if so, we could have other quirks to
hide BAR1 for David's system.

YH


\
 
 \ /
  Last update: 2008-08-23 22:31    [W:0.291 / U:0.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site