lkml.org 
[lkml]   [2008]   [Aug]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: HPET regression in 2.6.26 versus 2.6.25 -- found another user with the same regression


> > >> > This is true if he reverted just the 3def3d6d... commit, but if he
> > >> > also reverts the similar, and immediately following, 1e934dda...
> > >> > commit, then his 2.6.26 kernel runs fine.
> > >>
> > >> interesting,
> > >>
> > >> David, can you try only comment out
> > >>
> > >> late_initcall(lapic_insert_resource);
> > >
> > > i.e. the patch below?
> > >
> > > what's your theory, what could be the reason for David's lockups?
> >
> > could be insert_resource related.
> > 1. revert patch that change back insert_resource doesn't work
> > 2. insert_resource for lapic address moved to late after ....
> >
> > need to add debug printout for insert_resource/request_resource to
> > make sure thing going well
>
> but what can happen if it does not "go well"? The resource list is
> basically there to make sure we dont overlap resources. But is there a
> real danger here for any overlap?
>
> And insert_resource() differs from request_resource() in that
> insert_resource() allows "complete overlap". David has done printks of
> all resources in this thread - can you see anything suspicious in there?


Clarification: the resource-related outputs I have posted here so far
have been either from kernels without the regression (2.6.25 series, or
the v2.6.26 kernel with 2 reverts) or kernels _with_ the regression but
made to boot with "hpet=disable". Those outputs were 'cat /proc/iomem'.

Any other output I have posted here, involving insertion of printk's to
see diagnostic data just before the lockups, has not included resource-
related information. This is for two reasons:

1. It is hard to fit the entire contents of the iomem_resource tree on
the little 80x25 VGA screen!

2. The data I do get has to be hand-transcribed, decreasing the
reliability a lot.

3. It results mostly from my own personal experiments, trying to
understand what the kernel code is doing and what it is supposed to be
doing. You folks already know those things, so I assumed that most of
the data I produced would be irrelevant -- and when I asked if anyone
wanted to see it, there were no replies.


I fought on Monday with the idea of producing the equivalent of
'cat /proc/iomem', but on a hanging kernel just before it hangs. The
output format suffered as I tried to squeeze it all on one 80x25
screen, but I _did_ succeed:

===== BEGIN OUTPUT ===================
Number of resources handled by insert_resource(): 12
0-ffffffffffffffff PCI mem 0-9f3ff System RAM
9f400-9ffff reserved f0000-fffff reserved
100000-77fdffff System RAM 200000-56ff31 kernel code
56ff32-6d8fff kernel data 76a000-7ac907 kernel bss
77fe0000-77fe2fff ACPI non-vol 77fe3000-77feffff ACPI Tables
77ff0000-77ffffff reserved 78000000-7fffffff pnp 00:0d
80000000-800003ff 0000:00:14.0 d8000000-dfffffff PCI Bus 0000
d8000000-dfffffff 0000:01:05.0 e0000000-efffffff reserved
fdc00000-fdcfffff PCI Bus 0000 fdcff000-fcdff0ff 0000:02:05.0
fdd00000-fdefffff PCI Bus 0000 fdd00000-fddfffff 0000:01:05.0
fdee0000-fdeeffff 0000:01:05.0 fdefc000-fdefffff 0000:01:05.2
fdf00000-fdffffff PCI Bus 0000 fdf00000-fdf1ffff 0000:02:05.0
fe020000-fe023fff 0000:00:14.2 fe029000-fe0290ff 0000:00:13.5
fe02a000-fe02afff 0000:00:13.4 fe02b000-fe02bfff 0000:00:13.3
fe02c000-fe02cfff 0000:00:13.2 fe02d000-fe02dfff 0000:00:13.1
fe02e000-fe02efff 0000:00:13.0 fe02f000-fe02feff 0000:00:12.0
fec00000-ffffffff reserved
===== END OUTPUT ===================

Please beware that my recursion follows 'struct resource *' children first,
then siblings only after the entire child subtree is exhausted.

The only resource names that I see truncated are the "PCI Bus 0000" entries,
but those can be matched with the 'cat /proc/iomem' data I posted earlier;
the address ranges are similar to those of a working kernel:

===== v2.6.25 NON-REGRESSION KERNEL OUTPUT =====
$ cat /proc/iomem
00000000-0009f3ff : System RAM
0009f400-0009ffff : reserved
000f0000-000fffff : reserved
00100000-77fdffff : System RAM
00200000-0056ca21 : Kernel code
0056ca22-006ce3d7 : Kernel data
00753000-0079a3c7 : Kernel bss
77fe0000-77fe2fff : ACPI Non-volatile Storage
77fe3000-77feffff : ACPI Tables
77ff0000-77ffffff : reserved
78000000-7fffffff : pnp 00:0d
d8000000-dfffffff : PCI Bus #01
d8000000-dfffffff : 0000:01:05.0
d8000000-d8ffffff : uvesafb
e0000000-efffffff : PCI MMCONFIG 0
e0000000-efffffff : reserved
fdc00000-fdcfffff : PCI Bus #02
fdcff000-fdcff0ff : 0000:02:05.0
fdcff000-fdcff0ff : r8169
fdd00000-fdefffff : PCI Bus #01
fdd00000-fddfffff : 0000:01:05.0
fdee0000-fdeeffff : 0000:01:05.0
fdefc000-fdefffff : 0000:01:05.2
fdefc000-fdefffff : ICH HD audio
fdf00000-fdffffff : PCI Bus #02
fe020000-fe023fff : 0000:00:14.2
fe020000-fe023fff : ICH HD audio
fe029000-fe0290ff : 0000:00:13.5
fe029000-fe0290ff : ehci_hcd
fe02a000-fe02afff : 0000:00:13.4
fe02a000-fe02afff : ohci_hcd
fe02b000-fe02bfff : 0000:00:13.3
fe02b000-fe02bfff : ohci_hcd
fe02c000-fe02cfff : 0000:00:13.2
fe02c000-fe02cfff : ohci_hcd
fe02d000-fe02dfff : 0000:00:13.1
fe02d000-fe02dfff : ohci_hcd
fe02e000-fe02efff : 0000:00:13.0
fe02e000-fe02efff : ohci_hcd
fe02f000-fe02f3ff : 0000:00:12.0
fe02f000-fe02f3ff : ahci
fec00000-fec00fff : IOAPIC 0
fec00000-fec00fff : pnp 00:0d
fed00000-fed003ff : HPET 0
fed00000-fed003ff : 0000:00:14.0
fee00000-fee00fff : Local APIC
fff80000-fffeffff : pnp 00:0d
ffff0000-ffffffff : pnp 00:0d
===============================================

I see now that much is missing in the hanging kernel's output. It may be
hanging before all the resources are added.

[I have a dual core CPU. If the missing things are already supposed to be
there at this point, when inet_init() is running, could one core be hung
while the other core runs inet_init() until it hits synchronize_rcu()?
I'm sure my question is silly: I don't even know whether a SMP kernel
boots in SMP mode, or when it switches to SMP if it doesn't start that
way!]


The screenful of 80x25 output above was produced with the following code:
=========================================================================
diff --git a/kernel/resource.c b/kernel/resource.c
index f5b518e..d2c62d6 100644
--- a/kernel/resource.c
+++ b/kernel/resource.c
@@ -375,11 +375,16 @@ EXPORT_SYMBOL(allocate_resource);
* resource is inserted and the conflicting resources become children of
* the new resource.
*/
+
+extern unsigned dw_count;
+
int insert_resource(struct resource *parent, struct resource *new)
{
int result;
struct resource *first, *next;

+ static unsigned int num_calls = 0;
+
write_lock(&resource_lock);

for (;; parent = first) {
@@ -394,16 +399,19 @@ int insert_resource(struct resource *parent, struct resource *new)

if ((first->start > new->start) || (first->end < new->end))
break;
+
if ((first->start == new->start) && (first->end == new->end))
break;
}

for (next = first; ; next = next->sibling) {
/* Partial overlap? Bad, and unfixable */
- if (next->start < new->start || next->end > new->end)
+ if (next->start < new->start || next->end > new->end)
goto out;
+
if (!next->sibling)
break;
+
if (next->sibling->start > new->end)
break;
}
@@ -429,6 +437,9 @@ int insert_resource(struct resource *parent, struct resource *new)

out:
write_unlock(&resource_lock);
+
+ dw_count = ++num_calls;
+
return result;
}

diff --git a/net/core/dev.c b/net/core/dev.c
index 600bb23..b6f57c2 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -127,6 +127,8 @@
#include <linux/jhash.h>
#include <linux/random.h>

+#include <linux/ioport.h>
+
#include "net-sysfs.h"

/*
@@ -4304,9 +4306,29 @@ void free_netdev(struct net_device *dev)
put_device(&dev->dev);
}

+unsigned dw_count;
+
+void dw_print_res (struct resource *r)
+{
+ printk ("%9llx-%-16llx%14.12s", r->start, r->end, r->name);
+}
+
+void dw_recurse_res (struct resource *r)
+{
+ if (!r) return;
+
+ dw_print_res (r);
+ dw_recurse_res (r->child);
+ dw_recurse_res (r->sibling);
+}
+
/* Synchronize with packet receive processing. */
void synchronize_net(void)
{
might_sleep();
+
+ printk ("Number of resources handled by insert_resource(): %u\n", dw_count);
+ dw_recurse_res (&iomem_resource);
+
synchronize_rcu();
}
=========================================================================

HTH,
Dave W.


\
 
 \ /
  Last update: 2008-08-20 18:47    [W:0.027 / U:0.536 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site