lkml.org 
[lkml]   [2008]   [Aug]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH 1/1] toshiba_acpi: Add support for bluetooth toggling through rfkill (v5)
There's been a patch floating around for toshiba_acpi that exports an ad-hoc
/proc interface to toggle the bluetooth adapter in a large number of Toshiba
laptops. I'm not sure if it's still relevant for the latest models, but it is
still required for older models such as my Tecra M3.

This change pulls in the low level Toshiba-specific code from the old patch and
sets up an rfkill device and a polled input device to track the state of the
hardware kill-switch.

Signed-off-by: Philip Langdale <philipl@overt.org>
---
Kconfig | 1
toshiba_acpi.c | 264 +++++++++++++++++++++++++++++++++++++++++++++++++++++++--
2 files changed, 257 insertions(+), 8 deletions(-)

diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
index 735f5ea..047829c 100644
--- a/drivers/acpi/Kconfig
+++ b/drivers/acpi/Kconfig
@@ -260,6 +260,7 @@ config ACPI_ASUS
config ACPI_TOSHIBA
tristate "Toshiba Laptop Extras"
depends on X86
+ select INPUT_POLLDEV
select BACKLIGHT_CLASS_DEVICE
---help---
This driver adds support for access to certain system settings
diff --git a/drivers/acpi/toshiba_acpi.c b/drivers/acpi/toshiba_acpi.c
index 0a43c8e..0effbcc 100644
--- a/drivers/acpi/toshiba_acpi.c
+++ b/drivers/acpi/toshiba_acpi.c
@@ -3,6 +3,7 @@
*
*
* Copyright (C) 2002-2004 John Belmonte
+ * Copyright (C) 2008 Philip Langdale
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -33,7 +34,7 @@
*
*/

-#define TOSHIBA_ACPI_VERSION "0.18"
+#define TOSHIBA_ACPI_VERSION "0.19"
#define PROC_INTERFACE_VERSION 1

#include <linux/kernel.h>
@@ -42,6 +43,9 @@
#include <linux/types.h>
#include <linux/proc_fs.h>
#include <linux/backlight.h>
+#include <linux/platform_device.h>
+#include <linux/rfkill.h>
+#include <linux/input-polldev.h>

#include <asm/uaccess.h>

@@ -90,6 +94,7 @@ MODULE_LICENSE("GPL");
#define HCI_VIDEO_OUT 0x001c
#define HCI_HOTKEY_EVENT 0x001e
#define HCI_LCD_BRIGHTNESS 0x002a
+#define HCI_WIRELESS 0x0056

/* field definitions */
#define HCI_LCD_BRIGHTNESS_BITS 3
@@ -98,9 +103,14 @@ MODULE_LICENSE("GPL");
#define HCI_VIDEO_OUT_LCD 0x1
#define HCI_VIDEO_OUT_CRT 0x2
#define HCI_VIDEO_OUT_TV 0x4
+#define HCI_WIRELESS_KILL_SWITCH 0x01
+#define HCI_WIRELESS_BT_PRESENT 0x0f
+#define HCI_WIRELESS_BT_ATTACH 0x40
+#define HCI_WIRELESS_BT_POWER 0x80

static const struct acpi_device_id toshiba_device_ids[] = {
{"TOS6200", 0},
+ {"TOS6208", 0},
{"TOS1900", 0},
{"", 0},
};
@@ -193,7 +203,7 @@ static acpi_status hci_raw(const u32 in[HCI_WORDS], u32 out[HCI_WORDS])
return status;
}

-/* common hci tasks (get or set one value)
+/* common hci tasks (get or set one or two value)
*
* In addition to the ACPI status, the HCI system returns a result which
* may be useful (such as "not supported").
@@ -218,6 +228,154 @@ static acpi_status hci_read1(u32 reg, u32 * out1, u32 * result)
return status;
}

+static acpi_status hci_write2(u32 reg, u32 in1, u32 in2, u32* result)
+{
+ u32 in[HCI_WORDS] = { HCI_SET, reg, in1, in2, 0, 0 };
+ u32 out[HCI_WORDS];
+ acpi_status status = hci_raw(in, out);
+ *result = (status == AE_OK) ? out[0] : HCI_FAILURE;
+ return status;
+}
+
+static acpi_status hci_read2(u32 reg, u32* out1, u32* out2, u32* result)
+{
+ u32 in[HCI_WORDS] = { HCI_GET, reg, *out1, *out2, 0, 0 };
+ u32 out[HCI_WORDS];
+ acpi_status status = hci_raw(in, out);
+ *out1 = out[2];
+ *out2 = out[3];
+ *result = (status == AE_OK) ? out[0] : HCI_FAILURE;
+ return status;
+}
+
+struct toshiba_acpi_dev {
+ struct platform_device *p_dev;
+ struct rfkill *rfk_dev;
+ struct input_polled_dev *poll_dev;
+
+ const char *bt_name;
+ const char *rfk_name;
+
+ bool last_rfk_state;
+
+ struct mutex mutex;
+};
+
+static struct toshiba_acpi_dev toshiba_acpi = {
+ .bt_name = "Toshiba Bluetooth",
+ .rfk_name = "Toshiba RFKill Switch",
+ .last_rfk_state = FALSE,
+};
+
+/* Bluetooth rfkill handlers */
+
+static u32 hci_get_bt_present(bool *present)
+{
+ u32 hci_result;
+ u32 value, value2;
+ value = 0;
+ value2 = 0;
+ hci_read2(HCI_WIRELESS, &value, &value2, &hci_result);
+ if (hci_result == HCI_SUCCESS) {
+ *present = (value & HCI_WIRELESS_BT_PRESENT) ? TRUE : FALSE;
+ }
+ return hci_result;
+}
+
+static u32 hci_get_bt_on(bool *on)
+{
+ u32 hci_result;
+ u32 value, value2;
+ value = 0;
+ value2 = 0x0001;
+ hci_read2(HCI_WIRELESS, &value, &value2, &hci_result);
+ if (hci_result == HCI_SUCCESS) {
+ *on = (value & HCI_WIRELESS_BT_POWER) &&
+ (value & HCI_WIRELESS_BT_ATTACH);
+ }
+ return hci_result;
+}
+
+static u32 hci_get_radio_state(bool *radio_state)
+{
+ u32 hci_result;
+ u32 value, value2;
+
+ value = 0;
+ value2 = 0x0001;
+ hci_read2(HCI_WIRELESS, &value, &value2, &hci_result);
+
+ *radio_state = value & HCI_WIRELESS_KILL_SWITCH;
+ return hci_result;
+}
+
+static int bt_rfkill_toggle_radio(void *data, enum rfkill_state state)
+{
+ u32 result1, result2;
+ u32 value;
+ bool radio_state;
+
+ struct toshiba_acpi_dev *dev = data;
+
+ value = (state == RFKILL_STATE_UNBLOCKED);
+
+ if (hci_get_radio_state(&radio_state) != HCI_SUCCESS) {
+ return -EFAULT;
+ }
+
+ switch (state) {
+ case RFKILL_STATE_UNBLOCKED:
+ if (!radio_state) {
+ return -EPERM;
+ }
+ break;
+ case RFKILL_STATE_SOFT_BLOCKED:
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ mutex_lock(&dev->mutex);
+ hci_write2(HCI_WIRELESS, value, HCI_WIRELESS_BT_POWER, &result1);
+ hci_write2(HCI_WIRELESS, value, HCI_WIRELESS_BT_ATTACH, &result2);
+ mutex_unlock(&dev->mutex);
+
+ if (result1 != HCI_SUCCESS || result2 != HCI_SUCCESS) {
+ return -EFAULT;
+ }
+
+ return 0;
+}
+
+static void bt_poll_rfkill(struct input_polled_dev *poll_dev)
+{
+ bool state_changed;
+ bool new_rfk_state;
+ bool value;
+ u32 hci_result;
+
+ struct toshiba_acpi_dev *dev = poll_dev->private;
+
+ hci_result = hci_get_radio_state(&value);
+ if (hci_result != HCI_SUCCESS) {
+ return; /* Can't do anything useful */
+ }
+ new_rfk_state = value;
+
+ mutex_lock(&dev->mutex);
+ state_changed = new_rfk_state != dev->last_rfk_state;
+ dev->last_rfk_state = new_rfk_state;
+ mutex_unlock(&dev->mutex);
+
+ if (unlikely(state_changed)) {
+ rfkill_force_state(dev->rfk_dev,
+ new_rfk_state ?
+ RFKILL_STATE_SOFT_BLOCKED :
+ RFKILL_STATE_HARD_BLOCKED);
+ input_report_switch(poll_dev->input, SW_RFKILL_ALL, new_rfk_state);
+ }
+}
+
static struct proc_dir_entry *toshiba_proc_dir /*= 0*/ ;
static struct backlight_device *toshiba_backlight_device;
static int force_fan;
@@ -547,6 +705,15 @@ static struct backlight_ops toshiba_backlight_data = {

static void toshiba_acpi_exit(void)
{
+ if (toshiba_acpi.poll_dev) {
+ input_unregister_polled_device(toshiba_acpi.poll_dev);
+ input_free_polled_device(toshiba_acpi.poll_dev);
+ }
+
+ if (toshiba_acpi.rfk_dev) {
+ rfkill_unregister(toshiba_acpi.rfk_dev);
+ }
+
if (toshiba_backlight_device)
backlight_device_unregister(toshiba_backlight_device);

@@ -555,6 +722,8 @@ static void toshiba_acpi_exit(void)
if (toshiba_proc_dir)
remove_proc_entry(PROC_TOSHIBA, acpi_root_dir);

+ platform_device_unregister(toshiba_acpi.p_dev);
+
return;
}

@@ -562,6 +731,10 @@ static int __init toshiba_acpi_init(void)
{
acpi_status status = AE_OK;
u32 hci_result;
+ bool bt_present;
+ bool bt_on;
+ bool radio_on;
+ int ret = 0;

if (acpi_disabled)
return -ENODEV;
@@ -578,6 +751,18 @@ static int __init toshiba_acpi_init(void)
TOSHIBA_ACPI_VERSION);
printk(MY_INFO " HCI method: %s\n", method_hci);

+ mutex_init(&toshiba_acpi.mutex);
+
+ toshiba_acpi.p_dev = platform_device_register_simple("toshiba_acpi",
+ -1, NULL, 0);
+ if (IS_ERR(toshiba_acpi.p_dev)) {
+ ret = PTR_ERR(toshiba_acpi.p_dev);
+ printk(MY_ERR "unable to register platform device\n");
+ toshiba_acpi.p_dev= NULL;
+ toshiba_acpi_exit();
+ return ret;
+ }
+
force_fan = 0;
key_event_valid = 0;

@@ -586,19 +771,23 @@ static int __init toshiba_acpi_init(void)

toshiba_proc_dir = proc_mkdir(PROC_TOSHIBA, acpi_root_dir);
if (!toshiba_proc_dir) {
- status = AE_ERROR;
+ toshiba_acpi_exit();
+ return -ENODEV;
} else {
toshiba_proc_dir->owner = THIS_MODULE;
status = add_device();
- if (ACPI_FAILURE(status))
- remove_proc_entry(PROC_TOSHIBA, acpi_root_dir);
+ if (ACPI_FAILURE(status)) {
+ toshiba_acpi_exit();
+ return -ENODEV;
+ }
}

- toshiba_backlight_device = backlight_device_register("toshiba",NULL,
+ toshiba_backlight_device = backlight_device_register("toshiba",
+ &toshiba_acpi.p_dev->dev,
NULL,
&toshiba_backlight_data);
if (IS_ERR(toshiba_backlight_device)) {
- int ret = PTR_ERR(toshiba_backlight_device);
+ ret = PTR_ERR(toshiba_backlight_device);

printk(KERN_ERR "Could not register toshiba backlight device\n");
toshiba_backlight_device = NULL;
@@ -607,7 +796,66 @@ static int __init toshiba_acpi_init(void)
}
toshiba_backlight_device->props.max_brightness = HCI_LCD_BRIGHTNESS_LEVELS - 1;

- return (ACPI_SUCCESS(status)) ? 0 : -ENODEV;
+ /* Register rfkill switch for Bluetooth */
+ if (hci_get_bt_present(&bt_present) == HCI_SUCCESS && bt_present) {
+ toshiba_acpi.rfk_dev = rfkill_allocate(&toshiba_acpi.p_dev->dev,
+ RFKILL_TYPE_BLUETOOTH);
+ if (!toshiba_acpi.rfk_dev) {
+ printk(MY_ERR "unable to allocate rfkill device\n");
+ toshiba_acpi_exit();
+ return -ENOMEM;
+ }
+
+ toshiba_acpi.rfk_dev->name = toshiba_acpi.bt_name;
+ toshiba_acpi.rfk_dev->state = RFKILL_STATE_OFF;
+ toshiba_acpi.rfk_dev->toggle_radio = bt_rfkill_toggle_radio;
+ toshiba_acpi.rfk_dev->user_claim_unsupported = 1;
+ toshiba_acpi.rfk_dev->data = &toshiba_acpi;
+
+ if (hci_get_bt_on(&bt_on) == HCI_SUCCESS && bt_on) {
+ toshiba_acpi.rfk_dev->state = RFKILL_STATE_UNBLOCKED;
+ } else if (hci_get_radio_state(&radio_on) == HCI_SUCCESS && radio_on) {
+ toshiba_acpi.rfk_dev->state = RFKILL_STATE_SOFT_BLOCKED;
+ } else {
+ toshiba_acpi.rfk_dev->state = RFKILL_STATE_HARD_BLOCKED;
+ }
+
+ ret = rfkill_register(toshiba_acpi.rfk_dev);
+ if (ret) {
+ printk(MY_ERR "unable to register rfkill device\n");
+ toshiba_acpi_exit();
+ return -ENOMEM;
+ }
+ }
+
+ /* Register input device for kill switch */
+ toshiba_acpi.poll_dev = input_allocate_polled_device();
+ if (!toshiba_acpi.poll_dev) {
+ printk(MY_ERR "unable to allocate kill-switch input device\n");
+ toshiba_acpi_exit();
+ return -ENOMEM;
+ }
+ toshiba_acpi.poll_dev->private = &toshiba_acpi;
+ toshiba_acpi.poll_dev->poll = bt_poll_rfkill;
+ toshiba_acpi.poll_dev->poll_interval = 1000; /* msecs */
+
+ toshiba_acpi.poll_dev->input->name = toshiba_acpi.rfk_name;
+ toshiba_acpi.poll_dev->input->id.bustype = BUS_HOST;
+ toshiba_acpi.poll_dev->input->id.vendor = 0x0930; /* Toshiba USB Vendor ID */
+ set_bit(EV_SW, toshiba_acpi.poll_dev->input->evbit);
+ set_bit(SW_RFKILL_ALL, toshiba_acpi.poll_dev->input->swbit);
+ input_report_switch(toshiba_acpi.poll_dev->input, SW_RFKILL_ALL, TRUE);
+
+ ret = input_register_polled_device(toshiba_acpi.poll_dev);
+ if (ret) {
+ printk(MY_ERR "unable to register kill-switch input device\n");
+ rfkill_free(toshiba_acpi.rfk_dev);
+ toshiba_acpi.rfk_dev = NULL;
+ toshiba_acpi_exit();
+ return ret;
+ }
+
+ return 0;
}

module_init(toshiba_acpi_init);

\
 
 \ /
  Last update: 2008-08-16 21:25    [W:0.043 / U:22.492 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site