lkml.org 
[lkml]   [2008]   [Aug]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 00/53] dyn_array/nr_irqs/sparse_irq support v10
"Yinghai Lu" <yhlu.kernel@gmail.com> writes:

> On Thu, Aug 14, 2008 at 5:11 PM, Eric W. Biederman
> <ebiederm@xmission.com> wrote:
>> "Yinghai Lu" <yhlu.kernel@gmail.com> writes:
>>
>>> find something interesting:
>>>
>>> found new irq_cfg for irq 20
>>> 0 add_pin_to_irq: irq 20 --> apic 0 pin 20
>>> assign_irq_vector: irq 20 vector 0x59 cpu 5
>>> IOAPIC[0]: Set routing entry (0-20 -> 0x59 -> IRQ 20 Mode:1 Active:1)
>>> found new irq_desc for irq 20
>>> pci 0000:00:02.1: PCI INT B -> Link[LUS2] -> GSI 20 (level, low) -> IRQ 20
>>>
>>> IO APIC #0......
>>> .... register #00: 00000000
>>> ....... : physical APIC id: 00
>>> ....... : Delivery Type: 0
>>> ....... : LTS : 0
>>> .... register #01: 00170011
>>> ....... : max redirection entries: 0017
>>> ....... : PRQ implemented: 0
>>> ....... : IO APIC version: 0011
>>> .... register #02: 00000000
>>> ....... : arbitration: 00
>>> .... IRQ redirection table:
>>> NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect:
>>> ...
>>> 14 09 1 1 0 1 0 0 0 59
>>> ...
>>>
>>> ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>>> do_IRQ: cannot handle IRQ -1 vector 0x59 cpu 0
>>> ------------[ cut here ]------------
>>> Kernel BUG at 40206b11 [verbose debug info unavailable]
>>> invalid opcode: 0000 [#1] SMP
>>> Modules linked in:
>>>
>>> Pid: 70, comm: kasyncinit Not tainted (2.6.27-rc3-tip-00191-g98ccb89-dirty
> #23)
>>> EIP: 0060:[<40206b11>] EFLAGS: 00010092 CPU: 0
>>> EIP is at do_IRQ+0x6b/0xae
>>> EAX: 00000032 EBX: 00001d28 ECX: 00003434 EDX: 00000046
>>> ESI: 00000000 EDI: 00000059 EBP: c7a37d3c ESP: c7a37d14
>>> DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
>>> Process kasyncinit (pid: 70, ti=c7a36000 task=c79c9860 task.ti=c7a36000)
>>> Stack: 40a74317 40814ea0 ffffffff 00000059 00000000 00000000 ffffffff
> c421bd20
>>> c7a37d9c c7a37dac c7a37d7c 4020555f c421bd20 00000000 c421bd20 c7a37d9c
>>> c7a37dac c7a37d7c 40b717f8 0000007b 0000007b 000000d8 ffffffa6 4080db6c
>>> Call Trace:
>>> [<4020555f>] ? common_interrupt+0x23/0x28
>>>
>>>
>>> it is on 16cores system with 32bit bigsmp, so it is using phy_flat
>>> cpu 5 has apicid 9, and ioapic reg setting right with Dmod= 0 ( phys)
>>>
>>> but io_apic controller deliver that interrupt to cpu0 (with apicid =
>>> 4) instead of cpu 5 (with apic id = 9)
>>>
>>> look at the 64 bit, TARGET_CPUS for phys_flat is cpu_online_map
>>>
>>> and 32bit bigsmp TARGET_CPUS is only one cpu set and rotating with online
> cpu...
>>>
>>> Change 32bit bigsmp TARGE_CPUS ?
>>
>> Set vector_allocation_domain to CPU_MASK_ALL on 32bit. That doesn't give us
>> the benefit of per cpu vectors right now, but in my research there has not
>> been a 32bit kernel yet that has needed it. We have never shared vectors
>> between 2 gsi on 32bit x86, we have only collapsed the irq space.
>
> TARGET_CPUS only used by ioapic_xx.c

Target cpus is a hint to tell us what to do if the user has not.

> vector_allocator_domain will return cpumask_of_cpu(cpu)..

Which is a bug for lowest priority delivery mode. But you said
phys_flat and not flat. Which sounds like bigsmp last I read it.

>> On x86_64 before I did the per cpu vectors there were machines that
>> combined multiple interrupt sources (gsi) into the same irq. So
>> x86_64 has needed the per cpu vectors.
>>
>> Which means in practice that the irq compression on x86_32 was just a hack to
>> with not having enough irq_desc entries. I wish I had realized that last
>> time we were talking, as we could have unilaterally ripped out all of that
>> code as completely unnecessary on x86 and just bumped NR_IRQS to 1024 on
>> the boxes that had more than 256 gsis.
>
> now 32bit and 64bit is the same page now... (bigsmp == phys_flat)...
>
> will continue to merge io_apic_xx.c

Hmm. In that case I will ask that you look at all of the pieces of
irq migration code, and make certain that they have all come from x86_64.

There were a lot of little changes that had to be made. If this is
an irq migration problem it should be easy to find, by stressing irq
migration in user space. You probably want to turn off the in kernel
irq balancer while debugging this.

Eric



\
 
 \ /
  Last update: 2008-08-15 03:07    [W:0.060 / U:0.156 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site