lkml.org 
[lkml]   [2008]   [Aug]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: PIIX4: DMA timeout issue

>> Alan/Jeff, I tried to install ATA driver on PIIX4. After fixing IRQ number
>> to 143 for primary and secondary channel. I got following output and
>> it seems the driver has been loaded sucessfully. However, I couldn't
>> see any information from /proc/devices. Do you have any ideas?
>>
>
> You need the SCSI disk driver - sd_mod.ko.
>
>
Unfortunately, the timeout issue still happened on ATA driver as IDE.

Command (m for help): p

Disk /dev/sda: 60.0 GB, 60011642880 bytes
255 heads, 63 sectors/track, 7296 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x4892c004

Device Boot Start End Blocks Id System
/dev/sda1 1 17 136521 83 Linux
/dev/sda4 18 7296 58468567+ 5 Extended
/dev/sda5 18 7296 58468536 83 Linux

Command (m for help): w
The partition table has been altered!

Calling ioctl() to re-read partition table.
SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB)
sda: Write Protect is off
SCSI device sda: write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sda: sda1 sda4 < sda5 >
Syncing disks.
/ $ mkfs.ext3 -N 655360 /dev/sda5
mke2fs 1.40 (29-Jun-2007)
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
657984 inodes, 14617134 blocks
730856 blocks (5.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=0
447 block groups
32768 blocks per group, 32768 fragments per group
1472 inodes per group
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632,
2654208,
4096000, 7962624, 11239424

Writing inode tables: done
Creating journal (32768 blocks): done
Writing superblocks and filesystem accounting information: done

This filesystem will be automatically checked every 25 mounts or
180 days, whichever comes first. Use tune2fs -c or -i to override.
/ $ mkdir /aaa
/ $ ifconfig rep0 192.168.253.27
mv643xx_eth_if_start: register PHY interrupt rep0 port=1 sw=1 swport=2
/ $ mount -o nolock 192.168.253.26:/home1 /aaa
/ $ cd /disk_root/
/disk_root $ ls
/disk_root $ cd /
/ $ mount /dev/sda5 /disk_root/
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
/ $ cd /disk_root/
/disk_root $ tar -zxf /aaa/target_7xx_cge5.2008-07-10.tgz

ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: cmd 35/00:00:18:ef:28/00:04:01:00:00/e0 tag 0 cdb 0x0 data
524288 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2: soft resetting port
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: cmd 35/00:00:18:ef:28/00:04:01:00:00/e0 tag 0 cdb 0x0 data
524288 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2: soft resetting port
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: cmd 35/00:00:18:ef:28/00:04:01:00:00/e0 tag 0 cdb 0x0 data
524288 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2: soft resetting port
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: limiting speed to UDMA/25:PIO4
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: cmd 35/00:00:18:ef:28/00:04:01:00:00/e0 tag 0 cdb 0x0 data
524288 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2: soft resetting port
ata2.00: configured for UDMA/25
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: cmd 35/00:00:18:ef:28/00:04:01:00:00/e0 tag 0 cdb 0x0 data
524288 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2: soft resetting port
ata2.00: configured for UDMA/25
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: cmd 35/00:00:18:ef:28/00:04:01:00:00/e0 tag 0 cdb 0x0 data
524288 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2: soft resetting port
ata2.00: configured for UDMA/25
sd 1:0:0:0: SCSI error: return code = 0x08000002
sda: Current [descriptor]: sense key=0xb
ASC=0x0 ASCQ=0x0
Descriptor sense data with sense descriptors (in hex):
72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
00 00 00 00
end_request: I/O error, dev sda, sector 19459864
Buffer I/O error on device sda5, logical block 2398337
lost page write due to I/O error on sda5
Buffer I/O error on device sda5, logical block 2398338
lost page write due to I/O error on sda5
Buffer I/O error on device sda5, logical block 2398339
lost page write due to I/O error on sda5
Buffer I/O error on device sda5, logical block 2398340
lost page write due to I/O error on sda5
Buffer I/O error on device sda5, logical block 2398341
lost page write due to I/O error on sda5
Buffer I/O error on device sda5, logical block 2398342
lost page write due to I/O error on sda5
Buffer I/O error on device sda5, logical block 2398343
lost page write due to I/O error on sda5
Buffer I/O error on device sda5, logical block 2398344
lost page write due to I/O error on sda5
Buffer I/O error on device sda5, logical block 2398345
lost page write due to I/O error on sda5
Buffer I/O error on device sda5, logical block 2398346
lost page write due to I/O error on sda5
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: cmd ca/00:f8:18:f3:28/00:00:00:00:00/e1 tag 0 cdb 0x0 data
126976 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2: soft resetting port
ata2.00: configured for UDMA/25
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: cmd ca/00:f8:18:f3:28/00:00:00:00:00/e1 tag 0 cdb 0x0 data
126976 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2: soft resetting port
ata2.00: configured for UDMA/25
ata2: EH complete

Gavin


\
 
 \ /
  Last update: 2008-08-01 10:57    [W:0.070 / U:0.476 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site