lkml.org 
[lkml]   [2008]   [Aug]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 06/10] serial/mpc52xx_uart: remove code associated with !CONFIG_PPC_MERGE
Date
Now that arch/ppc is gone we don't need CONFIG_PPC_MERGE anymore
remove the dead code associated with !CONFIG_PPC_MERGE.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
drivers/serial/mpc52xx_uart.c | 181 +----------------------------------------
1 files changed, 1 insertions(+), 180 deletions(-)

diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c
index 3612607..6117d3d 100644
--- a/drivers/serial/mpc52xx_uart.c
+++ b/drivers/serial/mpc52xx_uart.c
@@ -72,13 +72,8 @@
#include <linux/console.h>
#include <linux/delay.h>
#include <linux/io.h>
-
-#if defined(CONFIG_PPC_MERGE)
#include <linux/of.h>
#include <linux/of_platform.h>
-#else
-#include <linux/platform_device.h>
-#endif

#include <asm/mpc52xx.h>
#include <asm/mpc512x.h>
@@ -107,12 +102,11 @@ static struct uart_port mpc52xx_uart_ports[MPC52xx_PSC_MAXNUM];
* it's cleared, then a memset(...,0,...) should be added to
* the console_init
*/
-#if defined(CONFIG_PPC_MERGE)
+
/* lookup table for matching device nodes to index numbers */
static struct device_node *mpc52xx_uart_nodes[MPC52xx_PSC_MAXNUM];

static void mpc52xx_uart_of_enumerate(void);
-#endif


#define PSC(port) ((struct mpc52xx_psc __iomem *)((port)->membase))
@@ -255,17 +249,12 @@ static void mpc52xx_psc_cw_restore_ints(struct uart_port *port)
/* Search for bus-frequency property in this node or a parent */
static unsigned long mpc52xx_getuartclk(void *p)
{
-#if defined(CONFIG_PPC_MERGE)
/*
* 5200 UARTs have a / 32 prescaler
* but the generic serial code assumes 16
* so return ipb freq / 2
*/
return mpc52xx_find_ipb_freq(p) / 2;
-#else
- pr_debug("unexpected call to mpc52xx_getuartclk with arch/ppc\n");
- return NULL;
-#endif
}

static struct psc_ops mpc52xx_psc_ops = {
@@ -886,10 +875,6 @@ mpc52xx_console_get_options(struct uart_port *port,

/* CT{U,L}R are write-only ! */
*baud = CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD;
-#if !defined(CONFIG_PPC_MERGE)
- if (__res.bi_baudrate)
- *baud = __res.bi_baudrate;
-#endif

/* Parse them */
switch (mr1 & MPC52xx_PSC_MODE_BITS_MASK) {
@@ -946,42 +931,6 @@ mpc52xx_console_write(struct console *co, const char *s, unsigned int count)
psc_ops->cw_restore_ints(port);
}

-#if !defined(CONFIG_PPC_MERGE)
-static int __init
-mpc52xx_console_setup(struct console *co, char *options)
-{
- struct uart_port *port = &mpc52xx_uart_ports[co->index];
-
- int baud = CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD;
- int bits = 8;
- int parity = 'n';
- int flow = 'n';
-
- if (co->index < 0 || co->index >= MPC52xx_PSC_MAXNUM)
- return -EINVAL;
-
- /* Basic port init. Needed since we use some uart_??? func before
- * real init for early access */
- spin_lock_init(&port->lock);
- port->uartclk = __res.bi_ipbfreq / 2; /* Look at CTLR doc */
- port->ops = &mpc52xx_uart_ops;
- port->mapbase = MPC52xx_PA(MPC52xx_PSCx_OFFSET(co->index+1));
-
- /* We ioremap ourself */
- port->membase = ioremap(port->mapbase, MPC52xx_PSC_SIZE);
- if (port->membase == NULL)
- return -EINVAL;
-
- /* Setup the port parameters accoding to options */
- if (options)
- uart_parse_options(options, &baud, &parity, &bits, &flow);
- else
- mpc52xx_console_get_options(port, &baud, &parity, &bits, &flow);
-
- return uart_set_options(port, co, baud, parity, bits, flow);
-}
-
-#else

static int __init
mpc52xx_console_setup(struct console *co, char *options)
@@ -1053,7 +1002,6 @@ mpc52xx_console_setup(struct console *co, char *options)

return uart_set_options(port, co, baud, parity, bits, flow);
}
-#endif /* defined(CONFIG_PPC_MERGE) */


static struct uart_driver mpc52xx_uart_driver;
@@ -1072,9 +1020,7 @@ static struct console mpc52xx_console = {
static int __init
mpc52xx_console_init(void)
{
-#if defined(CONFIG_PPC_MERGE)
mpc52xx_uart_of_enumerate();
-#endif
register_console(&mpc52xx_console);
return 0;
}
@@ -1100,115 +1046,6 @@ static struct uart_driver mpc52xx_uart_driver = {
.cons = MPC52xx_PSC_CONSOLE,
};

-
-#if !defined(CONFIG_PPC_MERGE)
-/* ======================================================================== */
-/* Platform Driver */
-/* ======================================================================== */
-
-static int __devinit
-mpc52xx_uart_probe(struct platform_device *dev)
-{
- struct resource *res = dev->resource;
-
- struct uart_port *port = NULL;
- int i, idx, ret;
-
- /* Check validity & presence */
- idx = dev->id;
- if (idx < 0 || idx >= MPC52xx_PSC_MAXNUM)
- return -EINVAL;
-
- if (!mpc52xx_match_psc_function(idx, "uart"))
- return -ENODEV;
-
- /* Init the port structure */
- port = &mpc52xx_uart_ports[idx];
-
- spin_lock_init(&port->lock);
- port->uartclk = __res.bi_ipbfreq / 2; /* Look at CTLR doc */
- port->fifosize = 512;
- port->iotype = UPIO_MEM;
- port->flags = UPF_BOOT_AUTOCONF |
- (uart_console(port) ? 0 : UPF_IOREMAP);
- port->line = idx;
- port->ops = &mpc52xx_uart_ops;
- port->dev = &dev->dev;
-
- /* Search for IRQ and mapbase */
- for (i = 0 ; i < dev->num_resources ; i++, res++) {
- if (res->flags & IORESOURCE_MEM)
- port->mapbase = res->start;
- else if (res->flags & IORESOURCE_IRQ)
- port->irq = res->start;
- }
- if (!port->irq || !port->mapbase)
- return -EINVAL;
-
- /* Add the port to the uart sub-system */
- ret = uart_add_one_port(&mpc52xx_uart_driver, port);
- if (!ret)
- platform_set_drvdata(dev, (void *)port);
-
- return ret;
-}
-
-static int
-mpc52xx_uart_remove(struct platform_device *dev)
-{
- struct uart_port *port = (struct uart_port *) platform_get_drvdata(dev);
-
- platform_set_drvdata(dev, NULL);
-
- if (port)
- uart_remove_one_port(&mpc52xx_uart_driver, port);
-
- return 0;
-}
-
-#ifdef CONFIG_PM
-static int
-mpc52xx_uart_suspend(struct platform_device *dev, pm_message_t state)
-{
- struct uart_port *port = (struct uart_port *) platform_get_drvdata(dev);
-
- if (port)
- uart_suspend_port(&mpc52xx_uart_driver, port);
-
- return 0;
-}
-
-static int
-mpc52xx_uart_resume(struct platform_device *dev)
-{
- struct uart_port *port = (struct uart_port *) platform_get_drvdata(dev);
-
- if (port)
- uart_resume_port(&mpc52xx_uart_driver, port);
-
- return 0;
-}
-#endif
-
-/* work with hotplug and coldplug */
-MODULE_ALIAS("platform:mpc52xx-psc");
-
-static struct platform_driver mpc52xx_uart_platform_driver = {
- .probe = mpc52xx_uart_probe,
- .remove = mpc52xx_uart_remove,
-#ifdef CONFIG_PM
- .suspend = mpc52xx_uart_suspend,
- .resume = mpc52xx_uart_resume,
-#endif
- .driver = {
- .owner = THIS_MODULE,
- .name = "mpc52xx-psc",
- },
-};
-#endif /* !defined(CONFIG_PPC_MERGE) */
-
-
-#if defined(CONFIG_PPC_MERGE)
/* ======================================================================== */
/* OF Platform Driver */
/* ======================================================================== */
@@ -1402,7 +1239,6 @@ static struct of_platform_driver mpc52xx_uart_of_driver = {
.name = "mpc52xx-psc-uart",
},
};
-#endif /* defined(CONFIG_PPC_MERGE) */


/* ======================================================================== */
@@ -1423,7 +1259,6 @@ mpc52xx_uart_init(void)
return ret;
}

-#if defined(CONFIG_PPC_MERGE)
mpc52xx_uart_of_enumerate();

ret = of_register_platform_driver(&mpc52xx_uart_of_driver);
@@ -1433,16 +1268,6 @@ mpc52xx_uart_init(void)
uart_unregister_driver(&mpc52xx_uart_driver);
return ret;
}
-#else
- psc_ops = &mpc52xx_psc_ops;
- ret = platform_driver_register(&mpc52xx_uart_platform_driver);
- if (ret) {
- printk(KERN_ERR "%s: platform_driver_register failed (%i)\n",
- __FILE__, ret);
- uart_unregister_driver(&mpc52xx_uart_driver);
- return ret;
- }
-#endif

return 0;
}
@@ -1450,11 +1275,7 @@ mpc52xx_uart_init(void)
static void __exit
mpc52xx_uart_exit(void)
{
-#if defined(CONFIG_PPC_MERGE)
of_unregister_platform_driver(&mpc52xx_uart_of_driver);
-#else
- platform_driver_unregister(&mpc52xx_uart_platform_driver);
-#endif
uart_unregister_driver(&mpc52xx_uart_driver);
}

--
1.5.5.1


\
 
 \ /
  Last update: 2008-08-01 18:49    [W:0.426 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site