lkml.org 
[lkml]   [2008]   [Jul]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 01/58] microblaze_v5: Kconfig patches
Date
From: Michal Simek <monstr@monstr.eu>

Acked-by: Stephen Neuendorffer <stephen.neuendorffer@xilinx.com>
Signed-off-by: Michal Simek <monstr@monstr.eu>
---
arch/microblaze/Kconfig | 127 +++++++++++++++++++++++++
arch/microblaze/Kconfig.debug | 39 ++++++++
arch/microblaze/platform/Kconfig.platform | 77 +++++++++++++++
arch/microblaze/platform/generic/Kconfig.auto | 62 ++++++++++++
4 files changed, 305 insertions(+), 0 deletions(-)
create mode 100644 arch/microblaze/Kconfig
create mode 100644 arch/microblaze/Kconfig.debug
create mode 100644 arch/microblaze/platform/Kconfig.platform
create mode 100644 arch/microblaze/platform/generic/Kconfig.auto

diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig
new file mode 100644
index 0000000..9774f71
--- /dev/null
+++ b/arch/microblaze/Kconfig
@@ -0,0 +1,127 @@
+# For a description of the syntax of this configuration file,
+# see Documentation/kbuild/kconfig-language.txt.
+
+mainmenu "Linux/Microblaze Kernel Configuration"
+
+config MICROBLAZE
+ def_bool y
+ select HAVE_LMB
+
+config MMU
+ def_bool n
+
+config SWAP
+ def_bool n
+
+config RWSEM_GENERIC_SPINLOCK
+ def_bool y
+
+config RWSEM_XCHGADD_ALGORITHM
+ bool
+
+config ARCH_HAS_ILOG2_U32
+ def_bool n
+
+config ARCH_HAS_ILOG2_U64
+ def_bool n
+
+config GENERIC_FIND_NEXT_BIT
+ def_bool y
+
+config GENERIC_HWEIGHT
+ def_bool y
+
+config GENERIC_HARDIRQS
+ def_bool y
+
+config GENERIC_IRQ_PROBE
+ def_bool y
+
+config GENERIC_CALIBRATE_DELAY
+ def_bool y
+
+config GENERIC_TIME
+ def_bool y
+
+config PCI
+ def_bool n
+
+config NO_DMA
+ def_bool y
+
+config GENERIC_CSUM
+ def_bool y
+
+source "init/Kconfig"
+
+source "arch/microblaze/platform/Kconfig.platform"
+
+menu "Processor type and features"
+
+source "kernel/Kconfig.preempt"
+
+source "kernel/Kconfig.hz"
+
+comment "Boot options"
+
+config CMDLINE_BOOL
+ bool "Default bootloader kernel arguments"
+
+config CMDLINE
+ string "Default kernel command string"
+ depends on CMDLINE_BOOL
+ default "console=ttyUL0,115200"
+ help
+ On some architectures there is currently no way for the boot loader
+ to pass arguments to the kernel. For these architectures, you should
+ supply some command-line options at build time by entering them
+ here.
+
+config CMDLINE_FORCE
+ bool "Force default kernel command string"
+ depends on CMDLINE_BOOL
+ default n
+ help
+ Set this to have arguments from the default kernel command string
+ override those passed by the boot loader.
+
+config OF
+ def_bool y
+
+config OF_DEVICE
+ def_bool y
+
+config PROC_DEVICETREE
+ bool "Support for device tree in /proc"
+ depends on PROC_FS
+ help
+ This option adds a device-tree directory under /proc which contains
+ an image of the device tree that the kernel copies from Open
+ Firmware or other boot firmware. If unsure, say Y here.
+
+endmenu
+
+config APM_EMULATION
+ bool
+
+source "mm/Kconfig"
+
+menu "Exectuable file formats"
+
+source "fs/Kconfig.binfmt"
+
+endmenu
+
+source "net/Kconfig"
+
+source "drivers/Kconfig"
+
+source "fs/Kconfig"
+
+source "arch/microblaze/Kconfig.debug"
+
+source "security/Kconfig"
+
+source "crypto/Kconfig"
+
+source "lib/Kconfig"
diff --git a/arch/microblaze/Kconfig.debug b/arch/microblaze/Kconfig.debug
new file mode 100644
index 0000000..611ef00
--- /dev/null
+++ b/arch/microblaze/Kconfig.debug
@@ -0,0 +1,39 @@
+# For a description of the syntax of this configuration file,
+# see Documentation/kbuild/kconfig-language.txt.
+
+menu "Kernel hacking"
+
+source "lib/Kconfig.debug"
+
+config EARLY_PRINTK
+ bool "Early printk function for kernel"
+ default n
+ help
+ This option turns on/off early printk messages to console.
+
+config EARLY_PRINTK_UARTLITE_ADDRESS
+ hex "Physical address where UART Lite for early printk is mapped"
+ depends on EARLY_PRINTK
+ default "0x00000000"
+ help
+ Please enter physical address where your uart lite is mapped.
+
+config HEART_BEAT
+ bool "Heart beat function for kernel"
+ default n
+ help
+ This option turns on/off heart beat kernel functionality on selected
+ GPIO address.
+
+config HEART_BEAT_ADDRESS
+ hex "Physical address for heart beat LED"
+ depends on HEART_BEAT
+ default "0x00000000"
+ help
+ Please enter physical address GPIO LED.
+
+config DEBUG_BOOTMEM
+ depends on DEBUG_KERNEL
+ bool "Debug BOOTMEM initialization"
+
+endmenu
diff --git a/arch/microblaze/platform/Kconfig.platform b/arch/microblaze/platform/Kconfig.platform
new file mode 100644
index 0000000..2789f92
--- /dev/null
+++ b/arch/microblaze/platform/Kconfig.platform
@@ -0,0 +1,77 @@
+# For a description of the syntax of this configuration file,
+# see Documentation/kbuild/kconfig-language.txt.
+#
+# Platform selection Kconfig menu for MicroBlaze targets
+#
+
+menu "Platform options"
+choice
+ prompt "Platform"
+ default PLATFORM_MICROBLAZE_AUTO
+ help
+ Choose which hardware board/platform you are targeting.
+
+config PLATFORM_GENERIC
+ bool "Generic"
+ help
+ Choose this option for the Generic platform.
+
+endchoice
+
+config SELFMOD
+ bool "Use self modified code for intc/timer"
+ depends on EXPERIMENTAL
+ default n
+ help
+ This choice enables self-modified code for interrupt controller
+ and timer.
+
+config SELFMOD_INTC
+ bool "Use self modified code for intc"
+ depends on SELFMOD
+ default y
+ help
+ This choice enables self-modified code for interrupt controller.
+
+config SELFMOD_TIMER
+ bool "Use self modified code for timer"
+ depends on SELFMOD
+ default y
+ help
+ This choice enables self-modified code for timer.
+
+config OPT_LIB_FUNCTION
+ bool "Optimalized lib function"
+ default y
+ help
+ Allows turn on optimalized library function (memcpy and memmove).
+ They are optimized by using word alignment. This will work
+ fine if both source and destination are aligned on the same
+ boundary. However, if they are aligned on different boundaries
+ shifts will be necessary. This might result in bad performance
+ on MicroBlaze systems without a barrel shifter.
+
+# This is still a bit broken - disabling for now JW 20070504
+config ALLOW_EDIT_AUTO
+ bool "Permit Display/edit of Kconfig.auto platform settings"
+ default n
+ help
+ Allows the editing of auto-generated platform settings from
+ the Kconfig.auto file. Obviously this does not change the
+ underlying hardware, so be very careful if you go editing
+ these settings.
+
+ Also, if you enable this, and edit various Kconfig.auto
+ settings, YOUR CHANGES WILL BE LOST if you then disable it
+ again. You have been warned!
+
+ If unsure, say no.
+
+comment "Automatic platform settings from Kconfig.auto"
+ depends on ALLOW_EDIT_AUTO
+
+if PLATFORM_GENERIC=y
+ source "arch/microblaze/platform/generic/Kconfig.auto"
+endif
+
+endmenu
diff --git a/arch/microblaze/platform/generic/Kconfig.auto b/arch/microblaze/platform/generic/Kconfig.auto
new file mode 100644
index 0000000..8f33468
--- /dev/null
+++ b/arch/microblaze/platform/generic/Kconfig.auto
@@ -0,0 +1,62 @@
+#
+# (C) Copyright 2007 Michal Simek
+#
+# Michal SIMEK <monstr@monstr.eu>
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+# CAUTION: This file is automatically generated by libgen.
+# Version: Xilinx EDK 9.2.02 EDK_Jm_SP2.3
+# Generate by U-BOOT v4.00.c
+#
+
+# Definitions for MICROBLAZE0
+comment "Definitions for MICROBLAZE0"
+ depends on ALLOW_EDIT_AUTO
+
+config KERNEL_BASE_ADDR
+ hex "Physical address where Linux Kernel is"
+ default "0x20000000"
+ help
+ BASE Address for kernel
+
+config XILINX_MICROBLAZE0_FAMILY
+ string "Targetted FPGA family" if ALLOW_EDIT_AUTO
+ default spartan3e
+
+config XILINX_MICROBLAZE0_USE_MSR_INSTR
+ int "USE_MSR_INSTR" if ALLOW_EDIT_AUTO
+ default 1
+
+config XILINX_MICROBLAZE0_USE_BARREL
+ int "USE_BARREL range (0:1)" if ALLOW_EDIT_AUTO
+ default 1
+
+config XILINX_MICROBLAZE0_USE_DIV
+ int "USE_DIV range (0:1)" if ALLOW_EDIT_AUTO
+ default 1
+
+config XILINX_MICROBLAZE0_USE_HW_MULT
+ int "USE_HW_MULT range (0:1)" if ALLOW_EDIT_AUTO
+ default 2
+
+config XILINX_MICROBLAZE0_USE_FPU
+ int "USE_FPU range (0:1)" if ALLOW_EDIT_AUTO
+ default 2
+
+config XILINX_MICROBLAZE0_HW_VER
+ string "Core version number" if ALLOW_EDIT_AUTO
+ default 7.00.b
--
1.5.4.GIT


\
 
 \ /
  Last update: 2008-07-08 14:49    [W:0.166 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site