lkml.org 
[lkml]   [2008]   [Jul]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH 27/30] W1: ds2490.c magic number work
This replaces some magic numbers with marcos and corrects one marco.

Signed-off-by: David Fries <david@fries.net>
Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
---
drivers/w1/masters/ds2490.c | 16 ++++++++++++----
1 files changed, 12 insertions(+), 4 deletions(-)

diff --git a/drivers/w1/masters/ds2490.c b/drivers/w1/masters/ds2490.c
index 754a4bb..d9e07d6 100644
--- a/drivers/w1/masters/ds2490.c
+++ b/drivers/w1/masters/ds2490.c
@@ -88,7 +88,7 @@
#define COMM_DT 0x2000
#define COMM_SPU 0x1000
#define COMM_F 0x0800
-#define COMM_NTP 0x0400
+#define COMM_NTF 0x0400
#define COMM_ICP 0x0200
#define COMM_RST 0x0100

@@ -440,7 +440,7 @@ static int ds_wait_status(struct ds_device *dev, struct ds_status *st)
printk("\n");
}
#endif
- } while(!(buf[0x08] & 0x20) && !(err < 0) && ++count < 100);
+ } while (!(buf[0x08] & ST_IDLE) && !(err < 0) && ++count < 100);

if (err >= 16 && st->status & ST_EPOF) {
printk(KERN_INFO "Resetting device after ST_EPOF.\n");
@@ -470,8 +470,16 @@ static int ds_reset(struct ds_device *dev)
{
int err;

- //err = ds_send_control(dev, COMM_1_WIRE_RESET | COMM_F | COMM_IM | COMM_SE, SPEED_FLEXIBLE);
- err = ds_send_control(dev, 0x43, SPEED_NORMAL);
+ /* Other potentionally interesting flags for reset.
+ *
+ * COMM_NTF: Return result register feedback. This could be used to
+ * detect some conditions such as short, alarming presence, or
+ * detect if a new device was detected.
+ *
+ * COMM_SE which allows SPEED_NORMAL, SPEED_FLEXIBLE, SPEED_OVERDRIVE:
+ * Select the data transfer rate.
+ */
+ err = ds_send_control(dev, COMM_1_WIRE_RESET | COMM_IM, SPEED_NORMAL);
if (err)
return err;

--
1.4.4.4[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2008-07-29 04:31    [W:1.202 / U:0.140 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site