lkml.org 
[lkml]   [2008]   [Jul]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 2/4] spi: split up spi_new_device() to allow two stage registration.
Date
From: Grant Likely <grant.likely@secretlab.ca>

spi_new_device() allocates and registers an spi device all in one swoop.
If the driver needs to add extra data to the spi_device before it is
registered, then this causes problems.

This patch splits the allocation and registration portions of code out
of spi_new_device() and creates three new functions; spi_alloc_device(),
spi_register_device(), and spi_device_release(). spi_new_device() is
modified to use the new functions for allocation and registration.
None of the existing users of spi_new_device() should be affected by
this change.

Drivers using the new API can forego the use of an spi_board_info
structure to describe the device layout and populate data into the
spi_device structure directly.

This change is in preparation for adding an OF device tree parser to
generate spi_devices based on data in the device tree.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
---

drivers/spi/spi.c | 139 ++++++++++++++++++++++++++++++++---------------
include/linux/spi/spi.h | 10 +++
2 files changed, 105 insertions(+), 44 deletions(-)

diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index ecca4a6..2077ef5 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -178,6 +178,96 @@ struct boardinfo {
static LIST_HEAD(board_list);
static DEFINE_MUTEX(board_lock);

+/**
+ * spi_alloc_device - Allocate a new SPI device
+ * @master: Controller to which device is connected
+ * Context: can sleep
+ *
+ * Allows a driver to allocate and initialize and spi_device without
+ * registering it immediately. This allows a driver to directly
+ * fill the spi_device with device parameters before calling
+ * spi_add_device() on it.
+ *
+ * Caller is responsible to call spi_add_device() on the returned
+ * spi_device structure to add it to the SPI master. If the caller
+ * needs to discard the spi_device without adding it, then it should
+ * call spi_dev_put() on it.
+ *
+ * Returns a pointer to the new device, or NULL.
+ */
+struct spi_device *spi_alloc_device(struct spi_master *master)
+{
+ struct spi_device *spi;
+ struct device *dev = master->dev.parent;
+
+ if (!spi_master_get(master))
+ return NULL;
+
+ spi = kzalloc(sizeof *spi, GFP_KERNEL);
+ if (!spi) {
+ dev_err(dev, "cannot alloc spi_device\n");
+ spi_master_put(master);
+ return NULL;
+ }
+
+ spi->master = master;
+ spi->dev.parent = dev;
+ spi->dev.bus = &spi_bus_type;
+ spi->dev.release = spidev_release;
+ device_initialize(&spi->dev);
+ return spi;
+}
+EXPORT_SYMBOL_GPL(spi_alloc_device);
+
+/**
+ * spi_add_device - Add an spi_device allocated with spi_alloc_device
+ * @spi: spi_device to register
+ *
+ * Companion function to spi_alloc_device. Devices allocated with
+ * spi_alloc_device can be added onto the spi bus with this function.
+ *
+ * Returns 0 on success; non-zero on failure
+ */
+int spi_add_device(struct spi_device *spi)
+{
+ struct device *dev = spi->master->dev.parent;
+ int status;
+
+ /* Chipselects are numbered 0..max; validate. */
+ if (spi->chip_select >= spi->master->num_chipselect) {
+ dev_err(dev, "cs%d > max %d\n",
+ spi->chip_select,
+ spi->master->num_chipselect);
+ return -EINVAL;
+ }
+
+ /* Set the bus ID string */
+ snprintf(spi->dev.bus_id, sizeof spi->dev.bus_id,
+ "%s.%u", spi->master->dev.bus_id,
+ spi->chip_select);
+
+ /* drivers may modify this initial i/o setup */
+ status = spi->master->setup(spi);
+ if (status < 0) {
+ dev_err(dev, "can't %s %s, status %d\n",
+ "setup", spi->dev.bus_id, status);
+ return status;
+ }
+
+ /* driver core catches callers that misbehave by defining
+ * devices that already exist.
+ */
+ status = device_add(&spi->dev);
+ if (status < 0) {
+ dev_err(dev, "can't %s %s, status %d\n",
+ "add", spi->dev.bus_id, status);
+ return status;
+ }
+
+ dev_dbg(dev, "registered child %s\n", spi->dev.bus_id);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(spi_add_device);

/**
* spi_new_device - instantiate one new SPI device
@@ -197,7 +287,6 @@ struct spi_device *spi_new_device(struct spi_master *master,
struct spi_board_info *chip)
{
struct spi_device *proxy;
- struct device *dev = master->dev.parent;
int status;

/* NOTE: caller did any chip->bus_num checks necessary.
@@ -207,66 +296,28 @@ struct spi_device *spi_new_device(struct spi_master *master,
* suggests syslogged diagnostics are best here (ugh).
*/

- /* Chipselects are numbered 0..max; validate. */
- if (chip->chip_select >= master->num_chipselect) {
- dev_err(dev, "cs%d > max %d\n",
- chip->chip_select,
- master->num_chipselect);
- return NULL;
- }
-
- if (!spi_master_get(master))
+ proxy = spi_alloc_device(master);
+ if (!proxy)
return NULL;

WARN_ON(strlen(chip->modalias) >= sizeof(proxy->modalias));

- proxy = kzalloc(sizeof *proxy, GFP_KERNEL);
- if (!proxy) {
- dev_err(dev, "can't alloc dev for cs%d\n",
- chip->chip_select);
- goto fail;
- }
- proxy->master = master;
proxy->chip_select = chip->chip_select;
proxy->max_speed_hz = chip->max_speed_hz;
proxy->mode = chip->mode;
proxy->irq = chip->irq;
strlcpy(proxy->modalias, chip->modalias, sizeof(proxy->modalias));
-
- snprintf(proxy->dev.bus_id, sizeof proxy->dev.bus_id,
- "%s.%u", master->dev.bus_id,
- chip->chip_select);
- proxy->dev.parent = dev;
- proxy->dev.bus = &spi_bus_type;
proxy->dev.platform_data = (void *) chip->platform_data;
proxy->controller_data = chip->controller_data;
proxy->controller_state = NULL;
- proxy->dev.release = spidev_release;

- /* drivers may modify this initial i/o setup */
- status = master->setup(proxy);
+ status = spi_add_device(proxy);
if (status < 0) {
- dev_err(dev, "can't %s %s, status %d\n",
- "setup", proxy->dev.bus_id, status);
- goto fail;
+ spi_dev_put(proxy);
+ return NULL;
}

- /* driver core catches callers that misbehave by defining
- * devices that already exist.
- */
- status = device_register(&proxy->dev);
- if (status < 0) {
- dev_err(dev, "can't %s %s, status %d\n",
- "add", proxy->dev.bus_id, status);
- goto fail;
- }
- dev_dbg(dev, "registered child %s\n", proxy->dev.bus_id);
return proxy;
-
-fail:
- spi_master_put(master);
- kfree(proxy);
- return NULL;
}
EXPORT_SYMBOL_GPL(spi_new_device);

diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h
index a9cc29d..d203d08 100644
--- a/include/linux/spi/spi.h
+++ b/include/linux/spi/spi.h
@@ -778,8 +778,18 @@ spi_register_board_info(struct spi_board_info const *info, unsigned n)
* use spi_new_device() to describe each device. You can also call
* spi_unregister_device() to start making that device vanish, but
* normally that would be handled by spi_unregister_master().
+ *
+ * You can also use spi_alloc_device() and spi_add_device() to
+ * for a two stage registration of an SPI device. This gives the caller
+ * some more control over the spi_device structure before it is registered
*/
extern struct spi_device *
+spi_alloc_device(struct spi_master *master);
+
+extern int
+spi_add_device(struct spi_device *spi);
+
+extern struct spi_device *
spi_new_device(struct spi_master *, struct spi_board_info *);

static inline void


\
 
 \ /
  Last update: 2008-07-25 09:37    [W:0.219 / U:0.236 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site