lkml.org 
[lkml]   [2008]   [Jul]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH] s2255drv Sensoray 2255 driver fixes
From: Dean Anderson <dean@sensoray.com>

This patch fixes timer issues in driver disconnect.
It also removes the restriction of one user per channel at a time.

Signed-off-by: Dean Anderson <dean@sensoray.com>
---
patch to linux-git (pulled July 21,2008 linux-2.6.26-git9 ?).
Thanks to Oliver Neukum and Mauro Chehab for finding these issues.
Locking of video stream partly based on saa7134 driver.


diff --git a/drivers/media/video/s2255drv.c b/drivers/media/video/s2255drv.c
index 04eb2c3..581b689 100644
--- a/drivers/media/video/s2255drv.c
+++ b/drivers/media/video/s2255drv.c
@@ -184,6 +184,7 @@ struct s2255_dmaqueue {
#define S2255_FW_LOADED_DSPWAIT 1
#define S2255_FW_SUCCESS 2
#define S2255_FW_FAILED 3
+#define S2255_FW_DISCONNECTING 4

struct s2255_fw {
int fw_loaded;
@@ -263,7 +264,6 @@ struct s2255_buffer {

struct s2255_fh {
struct s2255_dev *dev;
- unsigned int resources;
const struct s2255_fmt *fmt;
unsigned int width;
unsigned int height;
@@ -273,14 +273,9 @@ struct s2255_fh {
/* mode below is the desired mode.
mode in s2255_dev is the current mode that was last set */
struct s2255_mode mode;
+ int resources[MAX_CHANNELS];
};

-/*
- * TODO: fixme S2255_MAX_USERS. Do not limit open driver handles.
- * Limit V4L to one stream at a time.
- */
-#define S2255_MAX_USERS 1
-
#define CUR_USB_FWVER 774 /* current cypress EEPROM firmware version */
#define S2255_MAJOR_VERSION 1
#define S2255_MINOR_VERSION 13
@@ -476,10 +471,9 @@ static void s2255_timer(unsigned long user_data)
dprintk(100, "s2255 timer\n");
if (usb_submit_urb(data->fw_urb, GFP_ATOMIC) < 0) {
printk(KERN_ERR "s2255: can't submit urb\n");
- if (data->fw) {
- release_firmware(data->fw);
- data->fw = NULL;
- }
+ atomic_set(&data->fw_state, S2255_FW_FAILED);
+ /* wake up anything waiting for the firmware */
+ wake_up(&data->wait_fw);
return;
}
}
@@ -509,13 +503,18 @@ static void s2255_fwchunk_complete(struct urb *urb)
struct usb_device *udev = urb->dev;
int len;
dprintk(100, "udev %p urb %p", udev, urb);
- /* TODO: fixme. reflect change in status */
if (urb->status) {
dev_err(&udev->dev, "URB failed with status %d", urb->status);
+ atomic_set(&data->fw_state, S2255_FW_FAILED);
+ /* wake up anything waiting for the firmware */
+ wake_up(&data->wait_fw);
return;
}
if (data->fw_urb == NULL) {
- dev_err(&udev->dev, "early disconncect\n");
+ dev_err(&udev->dev, "s2255 disconnected\n");
+ atomic_set(&data->fw_state, S2255_FW_FAILED);
+ /* wake up anything waiting for the firmware */
+ wake_up(&data->wait_fw);
return;
}
#define CHUNK_SIZE 512
@@ -789,7 +788,8 @@ static int res_get(struct s2255_dev *dev, struct s2255_fh *fh)
}
/* it's free, grab it */
dev->resources[fh->channel] = 1;
- dprintk(1, "res: get\n");
+ fh->resources[fh->channel] = 1;
+ dprintk(1, "s2255: res: get\n");
mutex_unlock(&dev->lock);
return 1;
}
@@ -799,9 +799,18 @@ static int res_locked(struct s2255_dev *dev, struct s2255_fh *fh)
return dev->resources[fh->channel];
}

+static int res_check(struct s2255_fh *fh)
+{
+ return fh->resources[fh->channel];
+}
+
+
static void res_free(struct s2255_dev *dev, struct s2255_fh *fh)
{
+ mutex_lock(&dev->lock);
dev->resources[fh->channel] = 0;
+ fh->resources[fh->channel] = 0;
+ mutex_unlock(&dev->lock);
dprintk(1, "res: put\n");
}

@@ -1232,7 +1241,7 @@ static int vidioc_streamon(struct file *file, void *priv, enum v4l2_buf_type i)
}

if (!res_get(dev, fh)) {
- dev_err(&dev->udev->dev, "res get busy\n");
+ dev_err(&dev->udev->dev, "s2255: stream busy\n");
return -EBUSY;
}

@@ -1288,8 +1297,10 @@ static int vidioc_streamoff(struct file *file, void *priv, enum v4l2_buf_type i)
}
s2255_stop_acquire(dev, fh->channel);
res = videobuf_streamoff(&fh->vb_vidq);
+ if (res < 0)
+ return res;
res_free(dev, fh);
- return res;
+ return 0;
}

static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id *i)
@@ -1462,12 +1473,7 @@ static int s2255_open(struct inode *inode, struct file *file)
mutex_lock(&dev->open_lock);

dev->users[cur_channel]++;
- if (dev->users[cur_channel] > S2255_MAX_USERS) {
- dev->users[cur_channel]--;
- mutex_unlock(&dev->open_lock);
- printk(KERN_INFO "s2255drv: too many open handles!\n");
- return -EBUSY;
- }
+ dprintk(4, "s2255: open_handles %d\n", dev->users[cur_channel]);

if (atomic_read(&dev->fw_data->fw_state) == S2255_FW_FAILED) {
err("2255 firmware load failed. retrying.\n");
@@ -1478,7 +1484,8 @@ static int s2255_open(struct inode *inode, struct file *file)
msecs_to_jiffies(S2255_LOAD_TIMEOUT));
if (atomic_read(&dev->fw_data->fw_state)
!= S2255_FW_SUCCESS) {
- printk(KERN_INFO "2255 FW load failed after 2 tries\n");
+ printk(KERN_INFO "2255 FW load failed.\n");
+ dev->users[cur_channel]--;
mutex_unlock(&dev->open_lock);
return -EFAULT;
}
@@ -1494,6 +1501,7 @@ static int s2255_open(struct inode *inode, struct file *file)
!= S2255_FW_SUCCESS) {
printk(KERN_INFO "2255 firmware not loaded"
"try again\n");
+ dev->users[cur_channel]--;
mutex_unlock(&dev->open_lock);
return -EBUSY;
}
@@ -1502,6 +1510,7 @@ static int s2255_open(struct inode *inode, struct file *file)
/* allocate + initialize per filehandle data */
fh = kzalloc(sizeof(*fh), GFP_KERNEL);
if (NULL == fh) {
+ dev->users[cur_channel]--;
mutex_unlock(&dev->open_lock);
return -ENOMEM;
}
@@ -1561,44 +1570,48 @@ static void s2255_destroy(struct kref *kref)
printk(KERN_ERR "s2255drv: kref problem\n");
return;
}
+
+ /*
+ * Wake up any firmware load waiting (only done in .open,
+ * which holds the open_lock mutex)
+ */
+ atomic_set(&dev->fw_data->fw_state, S2255_FW_DISCONNECTING);
+ wake_up(&dev->fw_data->wait_fw);
+
/* prevent s2255_disconnect from racing s2255_open */
mutex_lock(&dev->open_lock);
s2255_exit_v4l(dev);
- /* device unregistered so no longer possible to open. open_mutex
- can be unlocked */
+ /*
+ * device unregistered so no longer possible to open. open_mutex
+ * can be unlocked and timers deleted afterwards.
+ */
mutex_unlock(&dev->open_lock);

/* board shutdown stops the read pipe if it is running */
s2255_board_shutdown(dev);

/* make sure firmware still not trying to load */
+ del_timer(&dev->timer); /* only started in .probe and .open */
+
if (dev->fw_data->fw_urb) {
dprintk(2, "kill fw_urb\n");
usb_kill_urb(dev->fw_data->fw_urb);
usb_free_urb(dev->fw_data->fw_urb);
dev->fw_data->fw_urb = NULL;
}
+
/*
- * TODO: fixme(above, below): potentially leaving timers alive.
- * do not ignore timeout below if
- * it occurs.
+ * delete the dsp_wait timer, which sets the firmware
+ * state on completion. This is done before fw_data
+ * is freed below.
*/

- /* make sure we aren't waiting for the DSP */
- if (atomic_read(&dev->fw_data->fw_state) == S2255_FW_LOADED_DSPWAIT) {
- /* if we are, wait for the wakeup for fw_success or timeout */
- wait_event_timeout(dev->fw_data->wait_fw,
- (atomic_read(&dev->fw_data->fw_state)
- == S2255_FW_SUCCESS),
- msecs_to_jiffies(S2255_LOAD_TIMEOUT));
- }
+ del_timer(&dev->fw_data->dsp_wait); /* only started in .open */

- if (dev->fw_data) {
- if (dev->fw_data->fw)
- release_firmware(dev->fw_data->fw);
- kfree(dev->fw_data->pfw_data);
- kfree(dev->fw_data);
- }
+ if (dev->fw_data->fw)
+ release_firmware(dev->fw_data->fw);
+ kfree(dev->fw_data->pfw_data);
+ kfree(dev->fw_data);

usb_put_dev(dev->udev);
dprintk(1, "%s", __func__);
@@ -1615,17 +1628,23 @@ static int s2255_close(struct inode *inode, struct file *file)

mutex_lock(&dev->open_lock);

- if (dev->b_acquire[fh->channel])
- s2255_stop_acquire(dev, fh->channel);
- res_free(dev, fh);
+ /* turn off stream */
+ if (res_check(fh)) {
+ if (dev->b_acquire[fh->channel])
+ s2255_stop_acquire(dev, fh->channel);
+ videobuf_streamoff(&fh->vb_vidq);
+ res_free(dev, fh);
+ }
+
videobuf_mmap_free(&fh->vb_vidq);
- kfree(fh);
dev->users[fh->channel]--;
+
mutex_unlock(&dev->open_lock);

kref_put(&dev->kref, s2255_destroy);
dprintk(1, "s2255: close called (minor=%d, users=%d)\n",
minor, dev->users[fh->channel]);
+ kfree(fh);
return 0;
}



\
 
 \ /
  Last update: 2008-07-22 19:45    [W:0.046 / U:0.112 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site