lkml.org 
[lkml]   [2008]   [Jul]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH] ide-floppy fix
From
Hi Bart,

On Wed, Jul 16, 2008 at 07:56:46PM +0200, Bartlomiej Zolnierkiewicz wrote:
> On Wednesday 16 July 2008, Borislav Petkov wrote:
> > On Tue, Jul 15, 2008 at 10:58:48PM +0200, Bartlomiej Zolnierkiewicz wrote:
> > > On Tuesday 15 July 2008, Borislav Petkov wrote:
> > > > On Wed, Jul 16, 2008 at 05:59:16PM +0200, Bartlomiej Zolnierkiewicz wrote:
> > > > >
> > > > > Hi,
> > > > >
> > > > > On Tuesday 15 July 2008, Borislav Petkov wrote:
> > > > >
> > > > > [...]
> > > > >
> > > > > > On a different note, the current pata tree on top of v2.6.25-2125-g50515af blows
> > > > > > up here with the following error:
> > > > > >
> > > > > > [ 4.296729] Uniform Multi-Platform E-IDE driver
> > > > > > [ 4.297905] ICH4: IDE controller (0x8086:0x24cb rev 0x02) at PCI slot 0000:00:1f.1
> > > > > > [ 4.297986] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
> > > > > > [ 4.298153] ICH4: not 100% native mode: will probe irqs later
> > > > > > [ 4.298213] ide0: BM-DMA at 0xfc00-0xfc07
> > > > > > [ 4.298282] ide1: BM-DMA at 0xfc08-0xfc0f
> > > > > > [ 4.561768] hda: QUANTUM FIREBALLlct10 20, ATA DISK drive
> > > > > > [ 4.816724] hdb: SAMSUNG SP2014N, ATA DISK drive
> > > > > > [ 4.867959] hda: drive side 80-wire cable detection failed, limiting max speed to UDMA33
> > > > > > [ 4.868027] hda: UDMA/33 mode selected
> > > > > > [ 4.868441] hdb: UDMA/100 mode selected
> > > > > > [ 5.540683] hdc: IOMEGA ZIP 100 ATAPI, ATAPI FLOPPY drive
> > > > > > [ 5.795564] hdd: IC35L120AVV207-0, ATA DISK drive
> > > > > > [ 5.847295] hdd: host side 80-wire cable detection failed, limiting max speed to UDMA33
> > > > > > [ 5.847362] hdd: UDMA/33 mode selected
> > > > > > [ 5.847715] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> > > > > > [ 5.855487] ide1 at 0x170-0x177,0x376 on irq 15
> > > > > > [ 5.875927] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
> > > > > > [ 5.876012] ide_generic: I/O resource 0x1F0-0x1F7 not free.
> > > > > > [ 5.876074] ide_generic: I/O resource 0x170-0x177 not free.
> > > > > > [ 11.342504] hde: no response (status = 0xa1), resetting drive
> > > > > > [ 17.206535] hdf: no response (status = 0xa1), resetting drive
> > > > >
> > > > > hde? hdf?
> > > > >
> > > > > [...]
> > > >
> > > > yep, looks strange to me too. Isn't that the MAX_HWIFS upper bound of a loop.. ?
> > >
> > > Close, it is related to MAX_HWIFS being upper bound on hws[]
> > > in ide_generic.c but now we loop for ARRAY_SIZE(legacy_bases).
> > >
> > > IOW there is a memset(hws, 0, MAX_HWIFS) missing at the top of
> > > ide_generic_init() (please re-test after adding it).
> > >
> > > This may also explain the later problems with ide_host_register().
>
> I fixed this in pata tree now with:
>
> "ide-generic: remove ide_default_{io_base,irq}() inlines (take 2)" patch

here's the root cause for the problem: I had both Intel ICH chipset
(BLK_DEV_PIIX) und generic ide (BLK_DEV_GENERIC) selected in Kconfig and since
ICH4 uses the generic driver detection routine, the second(!) generic detection after the
ICH4 one failed and died. This is why request_region()-resources are shown as
not being free above:

> > > > > > [ 5.875927] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
> > > > > > [ 5.876012] ide_generic: I/O resource 0x1F0-0x1F7 not free.
> > > > > > [ 5.876074] ide_generic: I/O resource 0x170-0x177 not free.

One of the possible fixes is adding

depends on !BLK_DEV_GENERIC

after each IDE chipset driver using the generic detection in drivers/ide/Kconfig
but it's a not-that-elegant one. Another thing would be using a dummy one like
BLK_DEV_IDEDMA_PCI, but I'm not that sure. Will look into it. I'm pretty sure
you have a better idea...

>
> > > > > > From: Borislav Petkov <petkovbb@gmail.com>
> > > > > >
> > > > > > Check the correct flags-location for set features.
> > > > > >
> > > > > > Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
> > > > >
> > > > > Thanks, I folded the fix into original patch (->dev_flags is not yet
> > > > > upstream so -stable fix shouldn't be necessary).
> > > > >
> > > > > While on it: I later noticed that there will be also need for common
> > > > > ATA/ATAPI ->dev_flags in the future so I wonder whether current
> > > > > ->dev_flags should be renamed to ->atapi_flags (& s/*DFLAG*/*AFLAG*/).
> > > > >
> > > > > If there is agreement on this I'll fix it in pata tree.
> > > >
> > > > ... or if there's room, use a single ->dev_flags for all possible flag settings?
> > >
> > > Unfortunately there isn't enough room left (27 bits are occupied ATM)
> > > and having u64 ->dev_flags sucks...
> >
> > I'm pretty sure some of the 27 will be removed later but yeah, u64 flags is
> > kinda bad since it has to be always atomically updated and this has to be
> > explicitly staged on 32bit cpus due to the wordsize. I guess two flags members
>
> ->dev_flags -> ->atapi_flags & co. are also in pata tree now
>
> > are the easiest thing to do for now, you might add some comments to both so we
> > know which is which.
>
> Sure, I will remember about this when it comes time for ->dev_flags.
>
> Thanks,
> Bart

--
Regards/Gruß,
Boris.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2008-07-20 14:09    [W:0.160 / U:0.248 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site