lkml.org 
[lkml]   [2008]   [Jul]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: Misidentification and failing revalidations of ide dvd-roms with libata
Alan Cox wrote:
>> [ 155.457098] ata4.00: model number mismatch 'Pioneer DVD-ROM
>> ATAPIModel DVD-116 0109' != 'Pioïeer¡DVD­ROM¡ATAñIMoåel åVD-±16 ¡010¹'
>> [ 155.457103] ata4.00: revalidation failed (errno=-19)
>
> So it failed because the data read from the drive was corrupted.
>
>> As I understand, this would most commonly indicate that the drive has
>> gone bad, but this also occurs on the /other/ drive (same make/model) in
>
> Or a cable problem.

Hi Alan,

Should this apply here too? There are two separate cables, and I've
never seen the other drive to fail after the first drive has failed.
I've now ripped ~50 CDs with the still working drive, while this drive
failed during the first 5 CDs on my two previous boots.

I don't doubt that the revalidation goes bad, but I can't see hardware
being the cause of it as it hits any drive, but so-far only one drive pr
boot.

-S

> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>


--
Simen Thoresen, Dolphin ICS
Systems Administration and Wulfkit Support

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2008-07-20 21:37    [W:0.067 / U:0.948 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site