lkml.org 
[lkml]   [2008]   [Jul]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] x86: use x86_ops with numaq
Date

move numaq related mps table handling to numaq_32.c

also moving calling to smp_read_mpc_oem() to smp_read_mpc directly

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>

---
arch/x86/kernel/mpparse.c | 191 +++--------------------------
arch/x86/kernel/numaq_32.c | 190 +++++++++++++++++++++++++++-
include/asm-x86/mach-generic/mach_mpspec.h | 2
include/asm-x86/setup.h | 10 +
4 files changed, 212 insertions(+), 181 deletions(-)

Index: linux-2.6/arch/x86/kernel/mpparse.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/mpparse.c
+++ linux-2.6/arch/x86/kernel/mpparse.c
@@ -49,76 +49,6 @@ static int __init mpf_checksum(unsigned
return sum & 0xFF;
}

-#ifdef CONFIG_X86_NUMAQ
-int found_numaq;
-/*
- * Have to match translation table entries to main table entries by counter
- * hence the mpc_record variable .... can't see a less disgusting way of
- * doing this ....
- */
-struct mpc_config_translation {
- unsigned char mpc_type;
- unsigned char trans_len;
- unsigned char trans_type;
- unsigned char trans_quad;
- unsigned char trans_global;
- unsigned char trans_local;
- unsigned short trans_reserved;
-};
-
-
-static int mpc_record;
-static struct mpc_config_translation *translation_table[MAX_MPC_ENTRY]
- __cpuinitdata;
-
-static inline int generate_logical_apicid(int quad, int phys_apicid)
-{
- return (quad << 4) + (phys_apicid ? phys_apicid << 1 : 1);
-}
-
-
-static inline int mpc_apic_id(struct mpc_config_processor *m,
- struct mpc_config_translation *translation_record)
-{
- int quad = translation_record->trans_quad;
- int logical_apicid = generate_logical_apicid(quad, m->mpc_apicid);
-
- printk(KERN_DEBUG "Processor #%d %u:%u APIC version %d (quad %d, apic %d)\n",
- m->mpc_apicid,
- (m->mpc_cpufeature & CPU_FAMILY_MASK) >> 8,
- (m->mpc_cpufeature & CPU_MODEL_MASK) >> 4,
- m->mpc_apicver, quad, logical_apicid);
- return logical_apicid;
-}
-
-int mp_bus_id_to_node[MAX_MP_BUSSES];
-
-int mp_bus_id_to_local[MAX_MP_BUSSES];
-
-static void mpc_oem_bus_info(struct mpc_config_bus *m, char *name,
- struct mpc_config_translation *translation)
-{
- int quad = translation->trans_quad;
- int local = translation->trans_local;
-
- mp_bus_id_to_node[m->mpc_busid] = quad;
- mp_bus_id_to_local[m->mpc_busid] = local;
- printk(KERN_INFO "Bus #%d is %s (node %d)\n",
- m->mpc_busid, name, quad);
-}
-
-int quad_local_to_mp_bus_id [NR_CPUS/4][4];
-static void mpc_oem_pci_bus(struct mpc_config_bus *m,
- struct mpc_config_translation *translation)
-{
- int quad = translation->trans_quad;
- int local = translation->trans_local;
-
- quad_local_to_mp_bus_id[quad][local] = m->mpc_busid;
-}
-
-#endif
-
static void __cpuinit MP_processor_info(struct mpc_config_processor *m)
{
int apicid;
@@ -128,14 +58,12 @@ static void __cpuinit MP_processor_info(
disabled_cpus++;
return;
}
-#ifdef CONFIG_X86_NUMAQ
- if (found_numaq)
- apicid = mpc_apic_id(m, translation_table[mpc_record]);
+
+ if (x86_ops->mpc_apic_id)
+ apicid = x86_ops->mpc_apic_id(m);
else
apicid = m->mpc_apicid;
-#else
- apicid = m->mpc_apicid;
-#endif
+
if (m->mpc_cpuflag & CPU_BOOTPROCESSOR) {
bootup_cpu = " (Bootup-CPU)";
boot_cpu_physical_apicid = m->mpc_apicid;
@@ -152,12 +80,10 @@ static void __init MP_bus_info(struct mp
memcpy(str, m->mpc_bustype, 6);
str[6] = 0;

-#ifdef CONFIG_X86_NUMAQ
- if (found_numaq)
- mpc_oem_bus_info(m, str, translation_table[mpc_record]);
-#else
- printk(KERN_INFO "Bus #%d is %s\n", m->mpc_busid, str);
-#endif
+ if (x86_ops->mpc_oem_bus_info)
+ x86_ops->mpc_oem_bus_info(m, str);
+ else
+ printk(KERN_INFO "Bus #%d is %s\n", m->mpc_busid, str);

#if MAX_MP_BUSSES < 256
if (m->mpc_busid >= MAX_MP_BUSSES) {
@@ -174,10 +100,9 @@ static void __init MP_bus_info(struct mp
mp_bus_id_to_type[m->mpc_busid] = MP_BUS_ISA;
#endif
} else if (strncmp(str, BUSTYPE_PCI, sizeof(BUSTYPE_PCI) - 1) == 0) {
-#ifdef CONFIG_X86_NUMAQ
- if (found_numaq)
- mpc_oem_pci_bus(m, translation_table[mpc_record]);
-#endif
+ if (x86_ops->mpc_oem_pci_bus)
+ x86_ops->mpc_oem_pci_bus(m);
+
clear_bit(m->mpc_busid, mp_bus_not_pci);
#if defined(CONFIG_EISA) || defined (CONFIG_MCA)
mp_bus_id_to_type[m->mpc_busid] = MP_BUS_PCI;
@@ -317,83 +242,6 @@ static void __init MP_lintsrc_info(struc
m->mpc_srcbusirq, m->mpc_destapic, m->mpc_destapiclint);
}

-#ifdef CONFIG_X86_NUMAQ
-static void __init MP_translation_info(struct mpc_config_translation *m)
-{
- printk(KERN_INFO
- "Translation: record %d, type %d, quad %d, global %d, local %d\n",
- mpc_record, m->trans_type, m->trans_quad, m->trans_global,
- m->trans_local);
-
- if (mpc_record >= MAX_MPC_ENTRY)
- printk(KERN_ERR "MAX_MPC_ENTRY exceeded!\n");
- else
- translation_table[mpc_record] = m; /* stash this for later */
- if (m->trans_quad < MAX_NUMNODES && !node_online(m->trans_quad))
- node_set_online(m->trans_quad);
-}
-
-/*
- * Read/parse the MPC oem tables
- */
-
-static void __init smp_read_mpc_oem(struct mp_config_oemtable *oemtable,
- unsigned short oemsize)
-{
- int count = sizeof(*oemtable); /* the header size */
- unsigned char *oemptr = ((unsigned char *)oemtable) + count;
-
- mpc_record = 0;
- printk(KERN_INFO "Found an OEM MPC table at %8p - parsing it ... \n",
- oemtable);
- if (memcmp(oemtable->oem_signature, MPC_OEM_SIGNATURE, 4)) {
- printk(KERN_WARNING
- "SMP mpc oemtable: bad signature [%c%c%c%c]!\n",
- oemtable->oem_signature[0], oemtable->oem_signature[1],
- oemtable->oem_signature[2], oemtable->oem_signature[3]);
- return;
- }
- if (mpf_checksum((unsigned char *)oemtable, oemtable->oem_length)) {
- printk(KERN_WARNING "SMP oem mptable: checksum error!\n");
- return;
- }
- while (count < oemtable->oem_length) {
- switch (*oemptr) {
- case MP_TRANSLATION:
- {
- struct mpc_config_translation *m =
- (struct mpc_config_translation *)oemptr;
- MP_translation_info(m);
- oemptr += sizeof(*m);
- count += sizeof(*m);
- ++mpc_record;
- break;
- }
- default:
- {
- printk(KERN_WARNING
- "Unrecognised OEM table entry type! - %d\n",
- (int)*oemptr);
- return;
- }
- }
- }
-}
-
-void numaq_mps_oem_check(struct mp_config_table *mpc, char *oem,
- char *productid)
-{
- if (strncmp(oem, "IBM NUMA", 8))
- printk("Warning! Not a NUMA-Q system!\n");
- else
- found_numaq = 1;
-
- if (mpc->mpc_oemptr)
- smp_read_mpc_oem((struct mp_config_oemtable *)mpc->mpc_oemptr,
- mpc->mpc_oemsize);
-}
-#endif /* CONFIG_X86_NUMAQ */
-
/*
* Read/parse the MPC
*/
@@ -458,7 +306,6 @@ static int __init smp_read_mpc(struct mp
} else
mps_oem_check(mpc, oem, str);
#endif
-
/* save the local APIC address, it might be non-default */
if (!acpi_lapic)
mp_lapic_addr = mpc->mpc_lapic;
@@ -466,12 +313,17 @@ static int __init smp_read_mpc(struct mp
if (early)
return 1;

+ if (mpc->mpc_oemptr && x86_ops->smp_read_mpc_oem) {
+ struct mp_config_oemtable *oem_table = (struct mp_config_oemtable *)(unsigned long)mpc->mpc_oemptr;
+ x86_ops->smp_read_mpc_oem(oem_table, mpc->mpc_oemsize);
+ }
+
/*
* Now process the configuration blocks.
*/
-#ifdef CONFIG_X86_NUMAQ
- mpc_record = 0;
-#endif
+ if (x86_ops->mpc_record)
+ *x86_ops->mpc_record = 0;
+
while (count < mpc->mpc_length) {
switch (*mpt) {
case MP_PROCESSOR:
@@ -537,9 +389,8 @@ static int __init smp_read_mpc(struct mp
count = mpc->mpc_length;
break;
}
-#ifdef CONFIG_X86_NUMAQ
- ++mpc_record;
-#endif
+ if (x86_ops->mpc_record)
+ (*x86_ops->mpc_record)++;
}

#ifdef CONFIG_X86_GENERICARCH
Index: linux-2.6/arch/x86/kernel/numaq_32.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/numaq_32.c
+++ linux-2.6/arch/x86/kernel/numaq_32.c
@@ -33,6 +33,7 @@
#include <asm/processor.h>
#include <asm/mpspec.h>
#include <asm/e820.h>
+#include <asm/setup.h>

#define MB_TO_PAGES(addr) ((addr) << (20 - PAGE_SHIFT))

@@ -71,6 +72,181 @@ static void __init smp_dump_qct(void)
}
}

+
+void __init numaq_tsc_disable(void)
+{
+ if (!found_numaq)
+ return;
+
+ if (num_online_nodes() > 1) {
+ printk(KERN_DEBUG "NUMAQ: disabling TSC\n");
+ setup_clear_cpu_cap(X86_FEATURE_TSC);
+ }
+}
+
+int found_numaq;
+/*
+ * Have to match translation table entries to main table entries by counter
+ * hence the mpc_record variable .... can't see a less disgusting way of
+ * doing this ....
+ */
+struct mpc_config_translation {
+ unsigned char mpc_type;
+ unsigned char trans_len;
+ unsigned char trans_type;
+ unsigned char trans_quad;
+ unsigned char trans_global;
+ unsigned char trans_local;
+ unsigned short trans_reserved;
+};
+
+/* x86_ops member */
+static int mpc_record;
+static struct mpc_config_translation *translation_table[MAX_MPC_ENTRY]
+ __cpuinitdata;
+
+static inline int generate_logical_apicid(int quad, int phys_apicid)
+{
+ return (quad << 4) + (phys_apicid ? phys_apicid << 1 : 1);
+}
+
+/* x86_ops member */
+static int mpc_apic_id(struct mpc_config_processor *m)
+{
+ int quad = translation_table[mpc_record]->trans_quad;
+ int logical_apicid = generate_logical_apicid(quad, m->mpc_apicid);
+
+ printk(KERN_DEBUG "Processor #%d %u:%u APIC version %d (quad %d, apic %d)\n",
+ m->mpc_apicid,
+ (m->mpc_cpufeature & CPU_FAMILY_MASK) >> 8,
+ (m->mpc_cpufeature & CPU_MODEL_MASK) >> 4,
+ m->mpc_apicver, quad, logical_apicid);
+ return logical_apicid;
+}
+
+int mp_bus_id_to_node[MAX_MP_BUSSES];
+
+int mp_bus_id_to_local[MAX_MP_BUSSES];
+
+/* x86_ops member */
+static void mpc_oem_bus_info(struct mpc_config_bus *m, char *name)
+{
+ int quad = translation_table[mpc_record]->trans_quad;
+ int local = translation_table[mpc_record]->trans_local;
+
+ mp_bus_id_to_node[m->mpc_busid] = quad;
+ mp_bus_id_to_local[m->mpc_busid] = local;
+ printk(KERN_INFO "Bus #%d is %s (node %d)\n",
+ m->mpc_busid, name, quad);
+}
+
+int quad_local_to_mp_bus_id [NR_CPUS/4][4];
+
+/* x86_ops member */
+static void mpc_oem_pci_bus(struct mpc_config_bus *m)
+{
+ int quad = translation_table[mpc_record]->trans_quad;
+ int local = translation_table[mpc_record]->trans_local;
+
+ quad_local_to_mp_bus_id[quad][local] = m->mpc_busid;
+}
+
+static void __init MP_translation_info(struct mpc_config_translation *m)
+{
+ printk(KERN_INFO
+ "Translation: record %d, type %d, quad %d, global %d, local %d\n",
+ mpc_record, m->trans_type, m->trans_quad, m->trans_global,
+ m->trans_local);
+
+ if (mpc_record >= MAX_MPC_ENTRY)
+ printk(KERN_ERR "MAX_MPC_ENTRY exceeded!\n");
+ else
+ translation_table[mpc_record] = m; /* stash this for later */
+ if (m->trans_quad < MAX_NUMNODES && !node_online(m->trans_quad))
+ node_set_online(m->trans_quad);
+}
+
+static int __init mpf_checksum(unsigned char *mp, int len)
+{
+ int sum = 0;
+
+ while (len--)
+ sum += *mp++;
+
+ return sum & 0xFF;
+}
+
+/*
+ * Read/parse the MPC oem tables
+ */
+
+static void __init smp_read_mpc_oem(struct mp_config_oemtable *oemtable,
+ unsigned short oemsize)
+{
+ int count = sizeof(*oemtable); /* the header size */
+ unsigned char *oemptr = ((unsigned char *)oemtable) + count;
+
+ mpc_record = 0;
+ printk(KERN_INFO "Found an OEM MPC table at %8p - parsing it ... \n",
+ oemtable);
+ if (memcmp(oemtable->oem_signature, MPC_OEM_SIGNATURE, 4)) {
+ printk(KERN_WARNING
+ "SMP mpc oemtable: bad signature [%c%c%c%c]!\n",
+ oemtable->oem_signature[0], oemtable->oem_signature[1],
+ oemtable->oem_signature[2], oemtable->oem_signature[3]);
+ return;
+ }
+ if (mpf_checksum((unsigned char *)oemtable, oemtable->oem_length)) {
+ printk(KERN_WARNING "SMP oem mptable: checksum error!\n");
+ return;
+ }
+ while (count < oemtable->oem_length) {
+ switch (*oemptr) {
+ case MP_TRANSLATION:
+ {
+ struct mpc_config_translation *m =
+ (struct mpc_config_translation *)oemptr;
+ MP_translation_info(m);
+ oemptr += sizeof(*m);
+ count += sizeof(*m);
+ ++mpc_record;
+ break;
+ }
+ default:
+ {
+ printk(KERN_WARNING
+ "Unrecognised OEM table entry type! - %d\n",
+ (int)*oemptr);
+ return;
+ }
+ }
+ }
+}
+
+static struct x86_ops numaq_x86_ops __initdata = {
+ .arch_time_init = NULL,
+ .arch_pre_intr_init = NULL,
+ .arch_memory_setup = NULL,
+ .arch_intr_init = NULL,
+ .arch_trap_init = NULL,
+ .mach_get_smp_config = NULL,
+ .mach_find_smp_config = NULL,
+ .mpc_record = &mpc_record,
+ .mpc_apic_id = mpc_apic_id,
+ .mpc_oem_bus_info = mpc_oem_bus_info,
+ .mpc_oem_pci_bus = mpc_oem_pci_bus,
+ .smp_read_mpc_oem = smp_read_mpc_oem,
+};
+
+void numaq_mps_oem_check(struct mp_config_table *mpc, char *oem,
+ char *productid)
+{
+ if (strncmp(oem, "IBM NUMA", 8))
+ printk("Warning! Not a NUMA-Q system!\n");
+ else
+ found_numaq = 1;
+}
+
static __init void early_check_numaq(void)
{
/*
@@ -82,6 +258,9 @@ static __init void early_check_numaq(voi
*/
if (smp_found_config)
early_get_smp_config();
+
+ if (found_numaq)
+ x86_ops = &numaq_x86_ops;
}

int __init get_memcfg_numaq(void)
@@ -92,14 +271,3 @@ int __init get_memcfg_numaq(void)
smp_dump_qct();
return 1;
}
-
-void __init numaq_tsc_disable(void)
-{
- if (!found_numaq)
- return;
-
- if (num_online_nodes() > 1) {
- printk(KERN_DEBUG "NUMAQ: disabling TSC\n");
- setup_clear_cpu_cap(X86_FEATURE_TSC);
- }
-}
Index: linux-2.6/include/asm-x86/mach-generic/mach_mpspec.h
===================================================================
--- linux-2.6.orig/include/asm-x86/mach-generic/mach_mpspec.h
+++ linux-2.6/include/asm-x86/mach-generic/mach_mpspec.h
@@ -7,4 +7,6 @@
/* Maximum 256 PCI busses, plus 1 ISA bus in each of 4 cabinets. */
#define MAX_MP_BUSSES 260

+extern void numaq_mps_oem_check(struct mp_config_table *mpc, char *oem,
+ char *productid);
#endif /* __ASM_MACH_MPSPEC_H */
Index: linux-2.6/include/asm-x86/setup.h
===================================================================
--- linux-2.6.orig/include/asm-x86/setup.h
+++ linux-2.6/include/asm-x86/setup.h
@@ -19,6 +19,9 @@ static inline int is_visws_box(void) { r
/*
* Any setup quirks to be performed?
*/
+struct mpc_config_processor;
+struct mpc_config_bus;
+struct mp_config_oemtable;
struct x86_ops {
int (*arch_time_init)(void);
int (*arch_pre_intr_init)(void);
@@ -27,6 +30,13 @@ struct x86_ops {
char * (*arch_memory_setup)(void);
int (*mach_get_smp_config)(unsigned int early);
int (*mach_find_smp_config)(unsigned int reserve);
+
+ int *mpc_record;
+ int (*mpc_apic_id)(struct mpc_config_processor *m);
+ void (*mpc_oem_bus_info)(struct mpc_config_bus *m, char *name);
+ void (*mpc_oem_pci_bus)(struct mpc_config_bus *m);
+ void (*smp_read_mpc_oem)(struct mp_config_oemtable *oemtable,
+ unsigned short oemsize);
};

extern struct x86_ops *x86_ops;

\
 
 \ /
  Last update: 2008-07-20 03:05    [W:1.725 / U:0.660 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site