lkml.org 
[lkml]   [2008]   [Jul]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH] V4L: Link tuner before saa7134
From
On Mon, July 14, 2008 03:48, hermann pitton wrote:
>
> Am Sonntag, den 13.07.2008, 19:32 +0100 schrieb Simon Arlott:
>> >From cde790c56ffe76f3d0bf6f38d89f4e671a5218c6 Mon Sep 17 00:00:00 2001
>> From: Simon Arlott <simon@redrum.invalid>
>> Date: Sun, 13 Jul 2008 19:24:53 +0100
>> Subject: [PATCH] V4L: Link tuner before saa7134
>>
>> If saa7134_init is run before v4l2_i2c_drv_init (tuner),
>> then saa7134_board_init2 will try to set the tuner type
>> for devices that don't exist yet. This moves tuner to
>> before all of the device-specific drivers so that it's
>> loaded early enough on boot.
>>
>> Signed-off-by: Simon Arlott <simon@fire.lp0.eu>
>> ---
>> drivers/media/video/Makefile | 4 ++--
>> 1 files changed, 2 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile
>> index ecbbfaa..6b0af12 100644
>> --- a/drivers/media/video/Makefile
>> +++ b/drivers/media/video/Makefile
>> @@ -18,6 +18,8 @@ ifeq ($(CONFIG_VIDEO_V4L1_COMPAT),y)
>> obj-$(CONFIG_VIDEO_DEV) += v4l1-compat.o
>> endif
>>
>> +obj-$(CONFIG_VIDEO_TUNER) += tuner.o
>> +
>> obj-$(CONFIG_VIDEO_BT848) += bt8xx/
>> obj-$(CONFIG_VIDEO_IR_I2C) += ir-kbd-i2c.o
>> obj-$(CONFIG_VIDEO_TVAUDIO) += tvaudio.o
>> @@ -84,8 +86,6 @@ obj-$(CONFIG_VIDEO_HEXIUM_GEMINI) += hexium_gemini.o
>> obj-$(CONFIG_VIDEO_DPC) += dpc7146.o
>> obj-$(CONFIG_TUNER_3036) += tuner-3036.o
>>
>> -obj-$(CONFIG_VIDEO_TUNER) += tuner.o
>> -
>> obj-$(CONFIG_VIDEOBUF_GEN) += videobuf-core.o
>> obj-$(CONFIG_VIDEOBUF_DMA_SG) += videobuf-dma-sg.o
>> obj-$(CONFIG_VIDEOBUF_VMALLOC) += videobuf-vmalloc.o
>> --
>> 1.5.6.2
>>
>
> Thanks a lot for working on it!
>
> I must admit that I have not tested it yet.
>
> Remaining issues are.
>
> #1 users can't set the tuner type anymore,
> but the few cases of tuner detection from eeprom we have should
> work again for that price.
There are already module parameters to do that... they can be used
from the kernel command line too.

>
> #2 We still don't have any sufficient HDTV support in the kernel ;)
>
DVB-T2? Why is that relevant to this change? My card doesn't even support
it.

> #0 On 2.6.25, without dedicated TV subnorm selection possible anymore
> and known auto detection flaws, fixed now, folks should have
> complained about it.
>
> Interestingly nothing like that happened.
>
> What could that mean?
>
I'm not sure what you're asking, but not many people appear to compile
v4l/dvb into the kernel. Lots of function calls still work on
uninitialised modules so ordering problems can easily be missed.

> Cheers,
> Hermann

--
Simon Arlott


\
 
 \ /
  Last update: 2008-07-14 13:43    [W:0.605 / U:0.080 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site