lkml.org 
[lkml]   [2008]   [Jul]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
SubjectRe: today's linux-next fails to boot
Date
Hi Ingo,

On Friday, 11 of July 2008, Rafael J. Wysocki wrote:
> On Friday, 11 of July 2008, Ingo Molnar wrote:
> >
> > * Rafael J. Wysocki <rjw@sisk.pl> wrote:
[--snip--]
>
> Well, it turns out that linux-next from today doesn't boot on my box too
> (64-bit) and I don't see anything obviously suspicious. Bisection time.

I have identified the source of the breakage on my box, but I don't really
think it's the same problem that Edwin is observing.

Namely, it turns out that some code in arch/x86/kernel/acpi/boot.c, as in
today's linux-next, doesn't really make sense, because we have two conflicting
DMA-based quirks in there for the same set of boxes (HP nx6325 and nx6125) and
one of them actually breaks my box.

I have reported that already, but it probably got lost somewhere.

Below is a patch that fixes things for me, on top of today's linux-next.
Please apply.

Thanks,
Rafael

---
Remove some code that breaks my HP nx6325 from arch/x86/kernel/acpi/boot.c.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
---
arch/x86/kernel/acpi/boot.c | 47 --------------------------------------------
1 file changed, 47 deletions(-)

Index: linux-next/arch/x86/kernel/acpi/boot.c
===================================================================
--- linux-next.orig/arch/x86/kernel/acpi/boot.c
+++ linux-next/arch/x86/kernel/acpi/boot.c
@@ -84,8 +84,6 @@ int acpi_lapic;
int acpi_ioapic;
int acpi_strict;

-static int disable_irq0_through_ioapic __initdata;
-
u8 acpi_sci_flags __initdata;
int acpi_sci_override_gsi __initdata;
int acpi_skip_timer_override __initdata;
@@ -982,10 +980,6 @@ void __init mp_override_legacy_irq(u8 bu
int pin;
struct mp_config_intsrc mp_irq;

- /* Skip the 8254 timer interrupt (IRQ 0) if requested. */
- if (bus_irq == 0 && disable_irq0_through_ioapic)
- return;
-
/*
* Convert 'gsi' to 'ioapic.pin'.
*/
@@ -1052,10 +1046,6 @@ void __init mp_config_acpi_legacy_irqs(v
for (i = 0; i < 16; i++) {
int idx;

- /* Skip the 8254 timer interrupt (IRQ 0) if requested. */
- if (i == 0 && disable_irq0_through_ioapic)
- continue;
-
for (idx = 0; idx < mp_irq_entries; idx++) {
struct mp_config_intsrc *irq = mp_irqs + idx;

@@ -1413,17 +1403,6 @@ static int __init force_acpi_ht(const st
}

/*
- * Don't register any I/O APIC entries for the 8254 timer IRQ.
- */
-static int __init
-dmi_disable_irq0_through_ioapic(const struct dmi_system_id *d)
-{
- pr_notice("%s detected: disabling IRQ 0 through I/O APIC\n", d->ident);
- disable_irq0_through_ioapic = 1;
- return 0;
-}
-
-/*
* Force ignoring BIOS IRQ0 pin2 override
*/
static int __init dmi_ignore_irq0_timer_override(const struct dmi_system_id *d)
@@ -1608,32 +1587,6 @@ static struct dmi_system_id __initdata a
* is enabled. This input is incorrectly designated the
* ISA IRQ 0 via an interrupt source override even though
* it is wired to the output of the master 8259A and INTIN0
- * is not connected at all. Abandon any attempts to route
- * IRQ 0 through the I/O APIC therefore.
- */
- {
- .callback = dmi_disable_irq0_through_ioapic,
- .ident = "HP NX6125 laptop",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
- DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq nx6125"),
- },
- },
- {
- .callback = dmi_disable_irq0_through_ioapic,
- .ident = "HP NX6325 laptop",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
- DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq nx6325"),
- },
- },
- /*
- * HP laptops which use a DSDT reporting as HP/SB400/10000,
- * which includes some code which overrides all temperature
- * trip points to 16C if the INTIN2 input of the I/O APIC
- * is enabled. This input is incorrectly designated the
- * ISA IRQ 0 via an interrupt source override even though
- * it is wired to the output of the master 8259A and INTIN0
* is not connected at all. Force ignoring BIOS IRQ0 pin2
* override in that cases.
*/

\
 
 \ /
  Last update: 2008-07-12 02:51    [W:0.060 / U:0.304 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site