lkml.org 
[lkml]   [2008]   [Jun]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH] Char: mxser, add CP-102UF support
    Date
    Add support for CP-102UF moxa card (update to 1.12 original driver) and
    increment this driver version.

    Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
    ---
    drivers/char/mxser.c | 12 +++++++-----
    1 files changed, 7 insertions(+), 5 deletions(-)

    diff --git a/drivers/char/mxser.c b/drivers/char/mxser.c
    index 0fedb1c..060fee9 100644
    --- a/drivers/char/mxser.c
    +++ b/drivers/char/mxser.c
    @@ -46,7 +46,7 @@

    #include "mxser.h"

    -#define MXSER_VERSION "2.0.3" /* 1.11 */
    +#define MXSER_VERSION "2.0.4" /* 1.12 */
    #define MXSERMAJOR 174
    #define MXSERCUMAJOR 175

    @@ -72,10 +72,11 @@

    #define PCI_DEVICE_ID_CB108 0x1080
    #define PCI_DEVICE_ID_CB114 0x1142
    -#define PCI_DEVICE_ID_CP114UL 0x1143
    #define PCI_DEVICE_ID_CB134I 0x1341
    -#define PCI_DEVICE_ID_CP138U 0x1380
    +#define PCI_DEVICE_ID_CP102UF 0x1023
    #define PCI_DEVICE_ID_POS104UL 0x1044
    +#define PCI_DEVICE_ID_CP114UL 0x1143
    +#define PCI_DEVICE_ID_CP138U 0x1380


    #define C168_ASIC_ID 1
    @@ -141,7 +142,8 @@ static const struct mxser_cardinfo mxser_cards[] = {
    { "CB-134I series", 4, },
    { "CP-138U series", 8, },
    { "POS-104UL series", 4, },
    - { "CP-114UL series", 4, }
    + { "CP-114UL series", 4, },
    +/*30*/ { "CP-102UF series", 2, },
    };

    /* driver_data correspond to the lines in the structure above
    @@ -171,6 +173,7 @@ static struct pci_device_id mxser_pcibrds[] = {
    { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CP138U), .driver_data = 27 },
    { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_POS104UL), .driver_data = 28 },
    { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CP114UL), .driver_data = 29 },
    + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CP102UF), .driver_data = 30 },
    { }
    };
    MODULE_DEVICE_TABLE(pci, mxser_pcibrds);
    @@ -1418,7 +1421,6 @@ static int mxser_set_serial_info(struct mxser_port *info,
    info->closing_wait = new_serial.closing_wait * HZ / 100;
    info->tty->low_latency =
    (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
    - info->tty->low_latency = 0;
    if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST &&
    (new_serial.baud_base != info->baud_base ||
    new_serial.custom_divisor !=
    --
    1.5.4.5


    \
     
     \ /
      Last update: 2008-06-09 12:15    [W:3.964 / U:0.184 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site