lkml.org 
[lkml]   [2008]   [Jun]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    SubjectRe: 2.6.26-rc5-git2: snd-emu10k1 does not work
    Date
    On Monday, 9 of June 2008, Takashi Iwai wrote:
    > At Sun, 8 Jun 2008 23:03:58 +0200,
    > Rafael J. Wysocki wrote:
    > >
    > > Hi,
    > >
    > > snd-emu10k1 doesn't work on one of my test boxes. The driver apparently loads,
    > > but the card is not visible, for example, to any mixer apps (including the ALSA
    > > mixer). However, YaST correctly detects and reports the card (the system is
    > > openSUSE 10.3, x86-64). The openSUSE-made kernel (2.6.22-something) does
    > > correctly work on the same hardware.
    > >
    > > Is there anything I should pay attention to, like any options related to /proc
    > > or sysfs that could have an effect on the audio adapter?
    >
    > First off, check /proc/asound/cards whether snd-emu10k1 driver is
    > really loaded on the first slot. I guess something else occupies the
    > position.

    This is quite possible, as there is an on-board audio in this box too and I'm
    not sure if the setup switch really turns it off.

    > If yes, a simple solution is to add the following option for snd module:
    >
    > options snd slots=snd-emu10k1
    >
    > then the first slot is reserved for emu10k1. Note that this option is
    > available for 2.6.25 or later kernel.

    I'll try later today and let you know.

    Thanks,
    Rafael


    \
     
     \ /
      Last update: 2008-06-09 16:59    [W:0.022 / U:1.428 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site