lkml.org 
[lkml]   [2008]   [Jun]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] x86: Merge setup_32/64.c into setup.c
Date

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>

---
arch/x86/kernel/Makefile | 2
arch/x86/kernel/setup.c | 676 ++++++++++++++++++++++++++++++++++++++++++++-
arch/x86/kernel/setup_32.c | 543 ------------------------------------
arch/x86/kernel/setup_64.c | 381 -------------------------
include/asm-x86/setup.h | 2
5 files changed, 670 insertions(+), 934 deletions(-)

Index: linux-2.6/arch/x86/kernel/Makefile
===================================================================
--- linux-2.6.orig/arch/x86/kernel/Makefile
+++ linux-2.6/arch/x86/kernel/Makefile
@@ -26,7 +26,7 @@ CFLAGS_paravirt.o := $(nostackp)
obj-y := process_$(BITS).o signal_$(BITS).o entry_$(BITS).o
obj-y += traps_$(BITS).o irq_$(BITS).o
obj-y += time_$(BITS).o ioport.o ldt.o
-obj-y += setup_$(BITS).o i8259.o irqinit_$(BITS).o setup.o
+obj-y += i8259.o irqinit_$(BITS).o setup.o
obj-$(CONFIG_X86_32) += probe_roms_32.o
obj-$(CONFIG_X86_32) += sys_i386_32.o i386_ksyms_32.o
obj-$(CONFIG_X86_64) += sys_x86_64.o x8664_ksyms_64.o
Index: linux-2.6/arch/x86/kernel/setup.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/setup.c
+++ linux-2.6/arch/x86/kernel/setup.c
@@ -1,19 +1,118 @@
-#include <linux/kernel.h>
+/*
+ * Copyright (C) 1995 Linus Torvalds
+ *
+ * Support of BIGMEM added by Gerhard Wichert, Siemens AG, July 1999
+ *
+ * Memory region support
+ * David Parsons <orc@pell.chi.il.us>, July-August 1999
+ *
+ * Added E820 sanitization routine (removes overlapping memory regions);
+ * Brian Moyle <bmoyle@mvista.com>, February 2001
+ *
+ * Moved CPU detection code to cpu/${cpu}.c
+ * Patrick Mochel <mochel@osdl.org>, March 2002
+ *
+ * Provisions for empty E820 memory regions (reported by certain BIOSes).
+ * Alex Achenbach <xela@slit.de>, December 2002.
+ *
+ */
+
+/*
+ * This file handles the architecture-dependent parts of initialization
+ */
+
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/mmzone.h>
+#include <linux/screen_info.h>
+#include <linux/ioport.h>
+#include <linux/acpi.h>
+#include <linux/apm_bios.h>
+#include <linux/initrd.h>
+#include <linux/bootmem.h>
+#include <linux/seq_file.h>
+#include <linux/console.h>
+#include <linux/mca.h>
+#include <linux/root_dev.h>
+#include <linux/highmem.h>
#include <linux/module.h>
+#include <linux/efi.h>
#include <linux/init.h>
-#include <linux/bootmem.h>
-#include <linux/percpu.h>
+#include <linux/edd.h>
+#include <linux/iscsi_ibft.h>
+#include <linux/nodemask.h>
+#include <linux/kexec.h>
+#include <linux/dmi.h>
+#include <linux/pfn.h>
+#include <linux/pci.h>
+#include <asm/pci-direct.h>
+#include <linux/init_ohci1394_dma.h>
+#include <linux/kvm_para.h>
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/stddef.h>
+#include <linux/unistd.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/user.h>
+#include <linux/delay.h>
+#include <linux/highmem.h>
+
+#include <linux/kallsyms.h>
+#include <linux/edd.h>
+#include <linux/iscsi_ibft.h>
#include <linux/kexec.h>
+#include <linux/cpufreq.h>
+#include <linux/dma-mapping.h>
+#include <linux/ctype.h>
+#include <linux/uaccess.h>
+
+#include <linux/percpu.h>
#include <linux/crash_dump.h>
+
+#include <video/edid.h>
+
+#include <asm/mtrr.h>
+#include <asm/apic.h>
+#include <asm/e820.h>
+#include <asm/mpspec.h>
+#include <asm/setup.h>
+#include <asm/arch_hooks.h>
+#include <asm/sections.h>
+#include <asm/dmi.h>
+#include <asm/io_apic.h>
+#include <asm/ist.h>
+#include <asm/vmi.h>
+#include <setup_arch.h>
+#include <asm/bios_ebda.h>
+#include <asm/cacheflush.h>
+#include <asm/processor.h>
+#include <asm/bugs.h>
+
+#include <asm/system.h>
+#include <asm/vsyscall.h>
#include <asm/smp.h>
+#include <asm/desc.h>
+#include <asm/dma.h>
+#include <asm/gart.h>
+#include <asm/mmu_context.h>
+#include <asm/proto.h>
+
+#include <mach_apic.h>
+#ifdef CONFIG_PARAVIRT
+#include <asm/paravirt.h>
+#else
+#define ARCH_SETUP
+#endif
+
#include <asm/percpu.h>
#include <asm/sections.h>
-#include <asm/processor.h>
-#include <asm/setup.h>
#include <asm/topology.h>
-#include <asm/mpspec.h>
#include <asm/apicdef.h>
+#ifdef CONFIG_X86_32
#include <asm/highmem.h>
+#endif

#ifndef CONFIG_DEBUG_BOOT_PARAMS
struct boot_params __initdata boot_params;
@@ -498,7 +597,7 @@ static struct resource standard_io_resou
.flags = IORESOURCE_BUSY | IORESOURCE_IO }
};

-void __init reserve_standard_io_resources(void)
+static void __init reserve_standard_io_resources(void)
{
int i;

@@ -523,3 +622,566 @@ static int __init setup_elfcorehdr(char
}
early_param("elfcorehdr", setup_elfcorehdr);
#endif
+
+/* real setup */
+
+/* This value is set up by the early boot code to point to the value
+ immediately after the boot time page tables. It contains a *physical*
+ address, and must not be in the .bss segment! */
+unsigned long init_pg_tables_start __initdata = ~0UL;
+unsigned long init_pg_tables_end __initdata = ~0UL;
+
+/*
+ * Machine setup..
+ */
+static struct resource data_resource = {
+ .name = "Kernel data",
+ .start = 0,
+ .end = 0,
+ .flags = IORESOURCE_BUSY | IORESOURCE_MEM
+};
+
+static struct resource code_resource = {
+ .name = "Kernel code",
+ .start = 0,
+ .end = 0,
+ .flags = IORESOURCE_BUSY | IORESOURCE_MEM
+};
+
+static struct resource bss_resource = {
+ .name = "Kernel bss",
+ .start = 0,
+ .end = 0,
+ .flags = IORESOURCE_BUSY | IORESOURCE_MEM
+};
+
+
+#ifdef CONFIG_X86_32
+static struct resource video_ram_resource = {
+ .name = "Video RAM area",
+ .start = 0xa0000,
+ .end = 0xbffff,
+ .flags = IORESOURCE_BUSY | IORESOURCE_MEM
+};
+
+/* cpu data as detected by the assembly code in head.S */
+struct cpuinfo_x86 new_cpu_data __cpuinitdata = {0, 0, 0, 0, -1, 1, 0, 0, -1};
+/* common cpu data for all cpus */
+struct cpuinfo_x86 boot_cpu_data __read_mostly = {0, 0, 0, 0, -1, 1, 0, 0, -1};
+EXPORT_SYMBOL(boot_cpu_data);
+static void set_mca_bus(int x)
+{
+#ifdef CONFIG_MCA
+ MCA_bus = x;
+#endif
+}
+
+unsigned int def_to_bigsmp;
+
+/* for MCA, but anyone else can use it if they want */
+unsigned int machine_id;
+unsigned int machine_submodel_id;
+unsigned int BIOS_revision;
+
+struct apm_info apm_info;
+EXPORT_SYMBOL(apm_info);
+
+#if defined(CONFIG_X86_SPEEDSTEP_SMI) || \
+ defined(CONFIG_X86_SPEEDSTEP_SMI_MODULE)
+struct ist_info ist_info;
+EXPORT_SYMBOL(ist_info);
+#else
+struct ist_info ist_info;
+#endif
+
+#else
+struct cpuinfo_x86 boot_cpu_data __read_mostly;
+EXPORT_SYMBOL(boot_cpu_data);
+#endif
+
+
+#if !defined(CONFIG_X86_PAE) || defined(CONFIG_X86_64)
+unsigned long mmu_cr4_features;
+#else
+unsigned long mmu_cr4_features = X86_CR4_PAE;
+#endif
+
+/* Boot loader ID as an integer, for the benefit of proc_dointvec */
+int bootloader_type;
+
+/*
+ * Early DMI memory
+ */
+int dmi_alloc_index;
+char dmi_alloc_data[DMI_MAX_DATA];
+
+/*
+ * Setup options
+ */
+struct screen_info screen_info;
+EXPORT_SYMBOL(screen_info);
+struct edid_info edid_info;
+EXPORT_SYMBOL_GPL(edid_info);
+
+extern int root_mountflags;
+
+unsigned long saved_video_mode;
+
+#define RAMDISK_IMAGE_START_MASK 0x07FF
+#define RAMDISK_PROMPT_FLAG 0x8000
+#define RAMDISK_LOAD_FLAG 0x4000
+
+static char __initdata command_line[COMMAND_LINE_SIZE];
+
+#if defined(CONFIG_EDD) || defined(CONFIG_EDD_MODULE)
+struct edd edd;
+#ifdef CONFIG_EDD_MODULE
+EXPORT_SYMBOL(edd);
+#endif
+/**
+ * copy_edd() - Copy the BIOS EDD information
+ * from boot_params into a safe place.
+ *
+ */
+static inline void copy_edd(void)
+{
+ memcpy(edd.mbr_signature, boot_params.edd_mbr_sig_buffer,
+ sizeof(edd.mbr_signature));
+ memcpy(edd.edd_info, boot_params.eddbuf, sizeof(edd.edd_info));
+ edd.mbr_signature_nr = boot_params.edd_mbr_sig_buf_entries;
+ edd.edd_info_nr = boot_params.eddbuf_entries;
+}
+#else
+static inline void copy_edd(void)
+{
+}
+#endif
+
+#ifdef CONFIG_BLK_DEV_INITRD
+
+#define MAX_MAP_CHUNK (NR_FIX_BTMAPS << PAGE_SHIFT)
+
+static void __init relocate_initrd(void)
+{
+#ifdef CONFIG_X86_32
+ u64 ramdisk_image = boot_params.hdr.ramdisk_image;
+ u64 ramdisk_size = boot_params.hdr.ramdisk_size;
+ u64 end_of_lowmem = max_low_pfn << PAGE_SHIFT;
+ u64 ramdisk_here;
+ unsigned long slop, clen, mapaddr;
+ char *p, *q;
+
+ ramdisk_here = initrd_start - PAGE_OFFSET;
+
+ q = (char *)initrd_start;
+
+ /* Copy any lowmem portion of the initrd */
+ if (ramdisk_image < end_of_lowmem) {
+ clen = end_of_lowmem - ramdisk_image;
+ p = (char *)__va(ramdisk_image);
+ memcpy(q, p, clen);
+ q += clen;
+ ramdisk_image += clen;
+ ramdisk_size -= clen;
+ }
+
+ /* Copy the highmem portion of the initrd */
+ while (ramdisk_size) {
+ slop = ramdisk_image & ~PAGE_MASK;
+ clen = ramdisk_size;
+ if (clen > MAX_MAP_CHUNK-slop)
+ clen = MAX_MAP_CHUNK-slop;
+ mapaddr = ramdisk_image & PAGE_MASK;
+ p = early_ioremap(mapaddr, clen+slop);
+ memcpy(q, p+slop, clen);
+ early_iounmap(p, clen+slop);
+ q += clen;
+ ramdisk_image += clen;
+ ramdisk_size -= clen;
+ }
+ /* high pages is not converted by early_res_to_bootmem */
+ ramdisk_image = boot_params.hdr.ramdisk_image;
+ ramdisk_size = boot_params.hdr.ramdisk_size;
+ printk(KERN_INFO "Move RAMDISK from %016llx - %016llx to"
+ " %08llx - %08llx\n",
+ ramdisk_image, ramdisk_image + ramdisk_size - 1,
+ ramdisk_here, ramdisk_here + ramdisk_size - 1);
+#endif
+}
+
+static void __init reserve_initrd(void)
+{
+ u64 ramdisk_image = boot_params.hdr.ramdisk_image;
+ u64 ramdisk_size = boot_params.hdr.ramdisk_size;
+ u64 ramdisk_end = ramdisk_image + ramdisk_size;
+ u64 end_of_lowmem = max_low_pfn << PAGE_SHIFT;
+#ifdef CONFIG_X86_32
+ u64 ramdisk_here;
+#endif
+
+ if (!boot_params.hdr.type_of_loader ||
+ !ramdisk_image || !ramdisk_size)
+ return; /* No initrd provided by bootloader */
+
+ initrd_start = 0;
+
+ if (ramdisk_size >= (end_of_lowmem>>1)) {
+ free_early(ramdisk_image, ramdisk_end);
+ printk(KERN_ERR "initrd too large to handle, "
+ "disabling initrd\n");
+ return;
+ }
+
+ printk(KERN_INFO "RAMDISK: %08llx - %08llx\n", ramdisk_image,
+ ramdisk_end);
+
+
+ if (ramdisk_end <= end_of_lowmem) {
+ /* All in lowmem, easy case */
+ /*
+ * don't need to reserve again, already reserved early
+ * in i386_start_kernel
+ */
+ initrd_start = ramdisk_image + PAGE_OFFSET;
+ initrd_end = initrd_start + ramdisk_size;
+ return;
+ }
+
+#ifdef CONFIG_X86_64
+ printk(KERN_ERR "initrd extends beyond end of memory "
+ "(0x%08llx > 0x%08llx)\ndisabling initrd\n",
+ ramdisk_end, end_of_lowmem);
+ initrd_start = 0;
+#else
+
+ /* We need to move the initrd down into lowmem */
+ ramdisk_here = find_e820_area(0, end_of_lowmem, ramdisk_size,
+ PAGE_SIZE);
+
+ if (ramdisk_here == -1ULL)
+ panic("Cannot find place for new RAMDISK of size %lld\n",
+ ramdisk_size);
+
+ /* Note: this includes all the lowmem currently occupied by
+ the initrd, we rely on that fact to keep the data intact. */
+ reserve_early(ramdisk_here, ramdisk_here + ramdisk_size,
+ "NEW RAMDISK");
+ initrd_start = ramdisk_here + PAGE_OFFSET;
+ initrd_end = initrd_start + ramdisk_size;
+ printk(KERN_INFO "Allocated new RAMDISK: %08llx - %08llx\n",
+ ramdisk_here, ramdisk_here + ramdisk_size);
+
+#endif
+ relocate_initrd();
+ free_early(ramdisk_image, ramdisk_end);
+}
+#else
+void __init reserve_initrd(void)
+{
+}
+#endif /* CONFIG_BLK_DEV_INITRD */
+
+/*
+ * Determine if we were loaded by an EFI loader. If so, then we have also been
+ * passed the efi memmap, systab, etc., so we should use these data structures
+ * for initialization. Note, the efi init code path is determined by the
+ * global efi_enabled. This allows the same kernel image to be used on existing
+ * systems (with a traditional BIOS) as well as on EFI systems.
+ */
+/*
+ * setup_arch - architecture-specific boot-time initializations
+ *
+ * Note: On x86_64, fixmaps are ready for use even before this is called.
+ */
+
+void __init setup_arch(char **cmdline_p)
+{
+#ifdef CONFIG_X86_32
+ memcpy(&boot_cpu_data, &new_cpu_data, sizeof(new_cpu_data));
+ pre_setup_arch_hook();
+ early_cpu_init();
+ early_ioremap_init();
+ reserve_setup_data();
+#else
+ printk(KERN_INFO "Command line: %s\n", boot_command_line);
+#endif
+
+ ROOT_DEV = old_decode_dev(boot_params.hdr.root_dev);
+ screen_info = boot_params.screen_info;
+ edid_info = boot_params.edid_info;
+#ifdef CONFIG_X86_32
+ apm_info.bios = boot_params.apm_bios_info;
+ ist_info = boot_params.ist_info;
+ if (boot_params.sys_desc_table.length != 0) {
+ set_mca_bus(boot_params.sys_desc_table.table[3] & 0x2);
+ machine_id = boot_params.sys_desc_table.table[0];
+ machine_submodel_id = boot_params.sys_desc_table.table[1];
+ BIOS_revision = boot_params.sys_desc_table.table[2];
+ }
+#endif
+ saved_video_mode = boot_params.hdr.vid_mode;
+ bootloader_type = boot_params.hdr.type_of_loader;
+
+#ifdef CONFIG_BLK_DEV_RAM
+ rd_image_start = boot_params.hdr.ram_size & RAMDISK_IMAGE_START_MASK;
+ rd_prompt = ((boot_params.hdr.ram_size & RAMDISK_PROMPT_FLAG) != 0);
+ rd_doload = ((boot_params.hdr.ram_size & RAMDISK_LOAD_FLAG) != 0);
+#endif
+#ifdef CONFIG_EFI
+ if (!strncmp((char *)&boot_params.efi_info.efi_loader_signature,
+#ifdef CONFIG_X86_32
+ "EL32",
+#else
+ "EL64",
+#endif
+ 4)) {
+ efi_enabled = 1;
+ efi_reserve_early();
+ }
+#endif
+
+ ARCH_SETUP
+
+ setup_memory_map();
+ copy_edd();
+
+ if (!boot_params.hdr.root_flags)
+ root_mountflags &= ~MS_RDONLY;
+ init_mm.start_code = (unsigned long) _text;
+ init_mm.end_code = (unsigned long) _etext;
+ init_mm.end_data = (unsigned long) _edata;
+#ifdef CONFIG_X86_32
+ init_mm.brk = init_pg_tables_end + PAGE_OFFSET;
+#else
+ init_mm.brk = (unsigned long) &_end;
+#endif
+
+ code_resource.start = virt_to_phys(_text);
+ code_resource.end = virt_to_phys(_etext)-1;
+ data_resource.start = virt_to_phys(_etext);
+ data_resource.end = virt_to_phys(_edata)-1;
+ bss_resource.start = virt_to_phys(&__bss_start);
+ bss_resource.end = virt_to_phys(&__bss_stop)-1;
+
+#ifdef CONFIG_X86_64
+ early_cpu_init();
+#endif
+ strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE);
+ *cmdline_p = command_line;
+
+ parse_setup_data();
+
+ parse_early_param();
+
+ if (acpi_mps_check()) {
+#ifdef CONFIG_X86_LOCAL_APIC
+#ifdef CONFIG_X86_32
+ enable_local_apic = -1;
+#else
+ disable_apic = 1;
+#endif
+#endif
+ clear_cpu_cap(&boot_cpu_data, X86_FEATURE_APIC);
+ }
+
+ finish_e820_parsing();
+
+#ifdef CONFIG_X86_32
+ probe_roms();
+#else
+# ifdef CONFIG_PROVIDE_OHCI1394_DMA_INIT
+ if (init_ohci1394_dma_early)
+ init_ohci1394_dma_on_all_controllers();
+# endif
+#endif
+
+ /* after parse_early_param, so could debug it */
+ insert_resource(&iomem_resource, &code_resource);
+ insert_resource(&iomem_resource, &data_resource);
+ insert_resource(&iomem_resource, &bss_resource);
+
+ if (efi_enabled)
+ efi_init();
+
+#ifdef CONFIG_X86_32
+ if (ppro_with_ram_bug()) {
+ e820_update_range(0x70000000ULL, 0x40000ULL, E820_RAM,
+ E820_RESERVED);
+ sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &e820.nr_map);
+ printk(KERN_INFO "fixed physical RAM map:\n");
+ e820_print_map("bad_ppro");
+ }
+#else
+ early_gart_iommu_check();
+#endif
+
+ e820_register_active_regions(0, 0, -1UL);
+ /*
+ * partially used pages are not usable - thus
+ * we are rounding upwards:
+ */
+ max_pfn = e820_end_of_ram();
+
+ /* preallocate 4k for mptable mpc */
+ early_reserve_e820_mpc_new();
+ /* update e820 for memory not covered by WB MTRRs */
+ mtrr_bp_init();
+ if (mtrr_trim_uncached_memory(max_pfn)) {
+ remove_all_active_ranges();
+ e820_register_active_regions(0, 0, -1UL);
+ max_pfn = e820_end_of_ram();
+ }
+
+#ifdef CONFIG_X86_32
+ /* max_low_pfn get updated here */
+ find_low_pfn_range();
+#else
+ num_physpages = max_pfn;
+
+ check_efer();
+
+ /* How many end-of-memory variables you have, grandma! */
+ /* need this before calling reserve_initrd */
+ max_low_pfn = max_pfn;
+ high_memory = (void *)__va(max_pfn * PAGE_SIZE - 1) + 1;
+#endif
+
+ /* max_pfn_mapped is updated here */
+#ifdef CONFIG_X86_64
+ max_pfn_mapped =
+#endif
+ init_memory_mapping(0, (max_low_pfn << PAGE_SHIFT));
+
+ reserve_initrd();
+
+#ifdef CONFIG_X86_64
+ vsmp_init();
+#endif
+
+ dmi_scan_machine();
+
+ io_delay_init();
+
+ /*
+ * Parse the ACPI tables for possible boot-time SMP configuration.
+ */
+ acpi_boot_table_init();
+
+#ifdef CONFIG_X86_64
+ /* Remove active ranges so rediscovery with NUMA-awareness happens */
+ remove_all_active_ranges();
+#endif
+
+#ifdef CONFIG_ACPI_NUMA
+ /*
+ * Parse SRAT to discover nodes.
+ */
+ acpi_numa_init();
+#endif
+
+ initmem_init(0, max_pfn);
+
+#ifdef CONFIG_X86_64
+ dma32_reserve_bootmem();
+#endif
+
+#ifdef CONFIG_ACPI_SLEEP
+ /*
+ * Reserve low memory region for sleep support.
+ */
+ acpi_reserve_bootmem();
+#endif
+#if defined(CONFIG_X86_FIND_SMP_CONFIG) && defined(CONFIG_X86_32) || \
+ defined(CONFIG_X86_MPPARSE) && defined(CONFIG_X86_64)
+ /*
+ * Find and reserve possible boot-time SMP configuration:
+ */
+ find_smp_config();
+#endif
+ reserve_crashkernel();
+
+ reserve_ibft_region();
+
+#ifdef CONFIG_KVM_CLOCK
+ kvmclock_init();
+#endif
+
+#if defined(CONFIG_VMI) && defined(CONFIG_X86_32)
+ /*
+ * Must be after max_low_pfn is determined, and before kernel
+ * pagetables are setup.
+ */
+ vmi_init();
+#endif
+
+ paging_init();
+
+#ifdef CONFIG_X86_64
+ map_vsyscall();
+#endif
+
+ /*
+ * NOTE: On x86-32, only from this point on, fixmaps are ready for use.
+ */
+
+#if defined(CONFIG_PROVIDE_OHCI1394_DMA_INIT) && defined(CONFIG_X86_32)
+ if (init_ohci1394_dma_early)
+ init_ohci1394_dma_on_all_controllers();
+#endif
+
+#ifdef CONFIG_X86_GENERICARCH
+ generic_apic_probe();
+#endif
+
+ early_quirks();
+
+ /*
+ * Read APIC and some other early information from ACPI tables.
+ */
+ acpi_boot_init();
+
+#ifdef CONFIG_X86_64
+ init_cpu_to_node();
+#endif
+
+#if defined(CONFIG_X86_MPPARSE) || defined(CONFIG_X86_VISWS)
+ /*
+ * get boot-time SMP configuration:
+ */
+ if (smp_found_config)
+ get_smp_config();
+#endif
+
+#ifdef CONFIG_X86_64
+ init_apic_mappings();
+ ioapic_init_mappings();
+#else
+# if defined(CONFIG_SMP) && defined(CONFIG_X86_PC)
+ if (def_to_bigsmp)
+ printk(KERN_WARNING "More than 8 CPUs detected and "
+ "CONFIG_X86_PC cannot handle it.\nUse "
+ "CONFIG_X86_GENERICARCH or CONFIG_X86_BIGSMP.\n");
+# endif
+#endif
+ kvm_guest_init();
+
+ e820_reserve_resources();
+ e820_mark_nosave_regions(max_low_pfn);
+
+#ifdef CONFIG_X86_32
+ request_resource(&iomem_resource, &video_ram_resource);
+#endif
+ reserve_standard_io_resources();
+
+ e820_setup_gap();
+
+#ifdef CONFIG_VT
+#if defined(CONFIG_VGA_CONSOLE)
+ if (!efi_enabled || (efi_mem_type(0xa0000) != EFI_CONVENTIONAL_MEMORY))
+ conswitchp = &vga_con;
+#elif defined(CONFIG_DUMMY_CONSOLE)
+ conswitchp = &dummy_con;
+#endif
+#endif
+}
+
Index: linux-2.6/include/asm-x86/setup.h
===================================================================
--- linux-2.6.orig/include/asm-x86/setup.h
+++ linux-2.6/include/asm-x86/setup.h
@@ -38,8 +38,6 @@ void reserve_crashkernel(void);
#ifndef __ASSEMBLY__
#include <asm/bootparam.h>

-void reserve_standard_io_resources(void);
-
#ifndef _SETUP

/*
Index: linux-2.6/arch/x86/kernel/setup_64.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/setup_64.c
+++ /dev/null
@@ -1,381 +0,0 @@
-/*
- * Copyright (C) 1995 Linus Torvalds
- */
-
-/*
- * This file handles the architecture-dependent parts of initialization
- */
-
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/stddef.h>
-#include <linux/unistd.h>
-#include <linux/ptrace.h>
-#include <linux/slab.h>
-#include <linux/user.h>
-#include <linux/screen_info.h>
-#include <linux/ioport.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/initrd.h>
-#include <linux/highmem.h>
-#include <linux/bootmem.h>
-#include <linux/module.h>
-#include <asm/processor.h>
-#include <linux/console.h>
-#include <linux/seq_file.h>
-#include <linux/root_dev.h>
-#include <linux/pci.h>
-#include <asm/pci-direct.h>
-#include <linux/efi.h>
-#include <linux/acpi.h>
-#include <linux/kallsyms.h>
-#include <linux/edd.h>
-#include <linux/iscsi_ibft.h>
-#include <linux/mmzone.h>
-#include <linux/kexec.h>
-#include <linux/cpufreq.h>
-#include <linux/dmi.h>
-#include <linux/dma-mapping.h>
-#include <linux/ctype.h>
-#include <linux/uaccess.h>
-#include <linux/init_ohci1394_dma.h>
-#include <linux/kvm_para.h>
-
-#include <asm/mtrr.h>
-#include <asm/uaccess.h>
-#include <asm/system.h>
-#include <asm/vsyscall.h>
-#include <asm/io.h>
-#include <asm/smp.h>
-#include <asm/desc.h>
-#include <video/edid.h>
-#include <asm/e820.h>
-#include <asm/mpspec.h>
-#include <asm/dma.h>
-#include <asm/gart.h>
-#include <asm/mpspec.h>
-#include <asm/mmu_context.h>
-#include <asm/proto.h>
-#include <asm/setup.h>
-#include <asm/numa.h>
-#include <asm/sections.h>
-#include <asm/dmi.h>
-#include <asm/cacheflush.h>
-
-#include <mach_apic.h>
-#ifdef CONFIG_PARAVIRT
-#include <asm/paravirt.h>
-#else
-#define ARCH_SETUP
-#endif
-
-/*
- * Machine setup..
- */
-
-struct cpuinfo_x86 boot_cpu_data __read_mostly;
-EXPORT_SYMBOL(boot_cpu_data);
-
-unsigned long mmu_cr4_features;
-
-/* Boot loader ID as an integer, for the benefit of proc_dointvec */
-int bootloader_type;
-
-unsigned long saved_video_mode;
-
-/*
- * Early DMI memory
- */
-int dmi_alloc_index;
-char dmi_alloc_data[DMI_MAX_DATA];
-
-/*
- * Setup options
- */
-struct screen_info screen_info;
-EXPORT_SYMBOL(screen_info);
-struct sys_desc_table_struct {
- unsigned short length;
- unsigned char table[0];
-};
-
-struct edid_info edid_info;
-EXPORT_SYMBOL_GPL(edid_info);
-
-extern int root_mountflags;
-
-static char __initdata command_line[COMMAND_LINE_SIZE];
-
-#define IORESOURCE_RAM (IORESOURCE_BUSY | IORESOURCE_MEM)
-
-static struct resource data_resource = {
- .name = "Kernel data",
- .start = 0,
- .end = 0,
- .flags = IORESOURCE_RAM,
-};
-static struct resource code_resource = {
- .name = "Kernel code",
- .start = 0,
- .end = 0,
- .flags = IORESOURCE_RAM,
-};
-static struct resource bss_resource = {
- .name = "Kernel bss",
- .start = 0,
- .end = 0,
- .flags = IORESOURCE_RAM,
-};
-
-#if defined(CONFIG_EDD) || defined(CONFIG_EDD_MODULE)
-struct edd edd;
-#ifdef CONFIG_EDD_MODULE
-EXPORT_SYMBOL(edd);
-#endif
-/**
- * copy_edd() - Copy the BIOS EDD information
- * from boot_params into a safe place.
- *
- */
-static inline void copy_edd(void)
-{
- memcpy(edd.mbr_signature, boot_params.edd_mbr_sig_buffer,
- sizeof(edd.mbr_signature));
- memcpy(edd.edd_info, boot_params.eddbuf, sizeof(edd.edd_info));
- edd.mbr_signature_nr = boot_params.edd_mbr_sig_buf_entries;
- edd.edd_info_nr = boot_params.eddbuf_entries;
-}
-#else
-static inline void copy_edd(void)
-{
-}
-#endif
-
-static void __init reserve_initrd(void)
-{
-#ifdef CONFIG_BLK_DEV_INITRD
- if (boot_params.hdr.type_of_loader && boot_params.hdr.ramdisk_image) {
- unsigned long ramdisk_image = boot_params.hdr.ramdisk_image;
- unsigned long ramdisk_size = boot_params.hdr.ramdisk_size;
- unsigned long ramdisk_end = ramdisk_image + ramdisk_size;
- unsigned long end_of_mem = max_pfn << PAGE_SHIFT;
-
- if (ramdisk_end <= end_of_mem) {
- /*
- * don't need to reserve again, already reserved early
- * in x86_64_start_kernel, and early_res_to_bootmem
- * will convert that to reserved in bootmem
- */
- initrd_start = ramdisk_image + PAGE_OFFSET;
- initrd_end = initrd_start+ramdisk_size;
- } else {
- free_early(ramdisk_image, ramdisk_end);
- printk(KERN_ERR "initrd extends beyond end of memory "
- "(0x%08lx > 0x%08lx)\ndisabling initrd\n",
- ramdisk_end, end_of_mem);
- initrd_start = 0;
- }
- }
-#endif
-}
-
-/*
- * setup_arch - architecture-specific boot-time initializations
- *
- * Note: On x86_64, fixmaps are ready for use even before this is called.
- */
-void __init setup_arch(char **cmdline_p)
-{
- printk(KERN_INFO "Command line: %s\n", boot_command_line);
-
- ROOT_DEV = old_decode_dev(boot_params.hdr.root_dev);
- screen_info = boot_params.screen_info;
- edid_info = boot_params.edid_info;
- saved_video_mode = boot_params.hdr.vid_mode;
- bootloader_type = boot_params.hdr.type_of_loader;
-
-#ifdef CONFIG_BLK_DEV_RAM
- rd_image_start = boot_params.hdr.ram_size & RAMDISK_IMAGE_START_MASK;
- rd_prompt = ((boot_params.hdr.ram_size & RAMDISK_PROMPT_FLAG) != 0);
- rd_doload = ((boot_params.hdr.ram_size & RAMDISK_LOAD_FLAG) != 0);
-#endif
-#ifdef CONFIG_EFI
- if (!strncmp((char *)&boot_params.efi_info.efi_loader_signature,
- "EL64", 4)) {
- efi_enabled = 1;
- efi_reserve_early();
- }
-#endif
-
- ARCH_SETUP
-
- setup_memory_map();
- copy_edd();
-
- if (!boot_params.hdr.root_flags)
- root_mountflags &= ~MS_RDONLY;
- init_mm.start_code = (unsigned long) &_text;
- init_mm.end_code = (unsigned long) &_etext;
- init_mm.end_data = (unsigned long) &_edata;
- init_mm.brk = (unsigned long) &_end;
-
- code_resource.start = virt_to_phys(&_text);
- code_resource.end = virt_to_phys(&_etext)-1;
- data_resource.start = virt_to_phys(&_etext);
- data_resource.end = virt_to_phys(&_edata)-1;
- bss_resource.start = virt_to_phys(&__bss_start);
- bss_resource.end = virt_to_phys(&__bss_stop)-1;
-
- early_cpu_init();
-
- strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE);
- *cmdline_p = command_line;
-
- parse_setup_data();
-
- parse_early_param();
-
- if (acpi_mps_check()) {
- disable_apic = 1;
- clear_cpu_cap(&boot_cpu_data, X86_FEATURE_APIC);
- }
-
-#ifdef CONFIG_PROVIDE_OHCI1394_DMA_INIT
- if (init_ohci1394_dma_early)
- init_ohci1394_dma_on_all_controllers();
-#endif
-
- finish_e820_parsing();
-
- /* after parse_early_param, so could debug it */
- insert_resource(&iomem_resource, &code_resource);
- insert_resource(&iomem_resource, &data_resource);
- insert_resource(&iomem_resource, &bss_resource);
-
- if (efi_enabled)
- efi_init();
-
- early_gart_iommu_check();
-
- e820_register_active_regions(0, 0, -1UL);
- /*
- * partially used pages are not usable - thus
- * we are rounding upwards:
- */
- max_pfn = e820_end_of_ram();
-
- /* pre allocte 4k for mptable mpc */
- early_reserve_e820_mpc_new();
- /* update e820 for memory not covered by WB MTRRs */
- mtrr_bp_init();
- if (mtrr_trim_uncached_memory(max_pfn)) {
- remove_all_active_ranges();
- e820_register_active_regions(0, 0, -1UL);
- max_pfn = e820_end_of_ram();
- }
-
- reserve_initrd();
-
- num_physpages = max_pfn;
-
- check_efer();
-
- max_pfn_mapped = init_memory_mapping(0, (max_pfn << PAGE_SHIFT));
-
- vsmp_init();
-
- dmi_scan_machine();
-
- io_delay_init();
-
- /*
- * Initialize the ACPI boot-time table parser (gets the RSDP and SDT).
- * Call this early for SRAT node setup.
- */
- acpi_boot_table_init();
-
- /* How many end-of-memory variables you have, grandma! */
- max_low_pfn = max_pfn;
- high_memory = (void *)__va(max_pfn * PAGE_SIZE - 1) + 1;
-
- /* Remove active ranges so rediscovery with NUMA-awareness happens */
- remove_all_active_ranges();
-
-#ifdef CONFIG_ACPI_NUMA
- /*
- * Parse SRAT to discover nodes.
- */
- acpi_numa_init();
-#endif
-
- initmem_init(0, max_pfn);
-
- dma32_reserve_bootmem();
-
-#ifdef CONFIG_ACPI_SLEEP
- /*
- * Reserve low memory region for sleep support.
- */
- acpi_reserve_bootmem();
-#endif
-
-#ifdef CONFIG_X86_MPPARSE
- /*
- * Find and reserve possible boot-time SMP configuration:
- */
- find_smp_config();
-#endif
- reserve_crashkernel();
-
- reserve_ibft_region();
-
-#ifdef CONFIG_KVM_CLOCK
- kvmclock_init();
-#endif
- paging_init();
- map_vsyscall();
-
- early_quirks();
-
- /*
- * Read APIC and some other early information from ACPI tables.
- */
- acpi_boot_init();
-
- init_cpu_to_node();
-
-#ifdef CONFIG_X86_MPPARSE
- /*
- * get boot-time SMP configuration:
- */
- if (smp_found_config)
- get_smp_config();
-#endif
- init_apic_mappings();
- ioapic_init_mappings();
-
- kvm_guest_init();
-
- /*
- * We trust e820 completely. No explicit ROM probing in memory.
- */
- e820_reserve_resources();
- e820_mark_nosave_regions(max_pfn);
-
- reserve_standard_io_resources();
-
- e820_setup_gap();
-
-#ifdef CONFIG_VT
-#if defined(CONFIG_VGA_CONSOLE)
- if (!efi_enabled || (efi_mem_type(0xa0000) != EFI_CONVENTIONAL_MEMORY))
- conswitchp = &vga_con;
-#elif defined(CONFIG_DUMMY_CONSOLE)
- conswitchp = &dummy_con;
-#endif
-#endif
-}
-
Index: linux-2.6/arch/x86/kernel/setup_32.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/setup_32.c
+++ /dev/null
@@ -1,543 +0,0 @@
-/*
- * Copyright (C) 1995 Linus Torvalds
- *
- * Support of BIGMEM added by Gerhard Wichert, Siemens AG, July 1999
- *
- * Memory region support
- * David Parsons <orc@pell.chi.il.us>, July-August 1999
- *
- * Added E820 sanitization routine (removes overlapping memory regions);
- * Brian Moyle <bmoyle@mvista.com>, February 2001
- *
- * Moved CPU detection code to cpu/${cpu}.c
- * Patrick Mochel <mochel@osdl.org>, March 2002
- *
- * Provisions for empty E820 memory regions (reported by certain BIOSes).
- * Alex Achenbach <xela@slit.de>, December 2002.
- *
- */
-
-/*
- * This file handles the architecture-dependent parts of initialization
- */
-
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/mmzone.h>
-#include <linux/screen_info.h>
-#include <linux/ioport.h>
-#include <linux/acpi.h>
-#include <linux/apm_bios.h>
-#include <linux/initrd.h>
-#include <linux/bootmem.h>
-#include <linux/seq_file.h>
-#include <linux/console.h>
-#include <linux/mca.h>
-#include <linux/root_dev.h>
-#include <linux/highmem.h>
-#include <linux/module.h>
-#include <linux/efi.h>
-#include <linux/init.h>
-#include <linux/edd.h>
-#include <linux/iscsi_ibft.h>
-#include <linux/nodemask.h>
-#include <linux/kexec.h>
-#include <linux/dmi.h>
-#include <linux/pfn.h>
-#include <linux/pci.h>
-#include <linux/init_ohci1394_dma.h>
-#include <linux/kvm_para.h>
-
-#include <video/edid.h>
-
-#include <asm/mtrr.h>
-#include <asm/apic.h>
-#include <asm/e820.h>
-#include <asm/mpspec.h>
-#include <asm/mmzone.h>
-#include <asm/setup.h>
-#include <asm/arch_hooks.h>
-#include <asm/sections.h>
-#include <asm/dmi.h>
-#include <asm/io_apic.h>
-#include <asm/ist.h>
-#include <asm/io.h>
-#include <asm/vmi.h>
-#include <setup_arch.h>
-#include <asm/bios_ebda.h>
-#include <asm/cacheflush.h>
-#include <asm/processor.h>
-#include <asm/efi.h>
-#include <asm/bugs.h>
-
-/* This value is set up by the early boot code to point to the value
- immediately after the boot time page tables. It contains a *physical*
- address, and must not be in the .bss segment! */
-unsigned long init_pg_tables_start __initdata = ~0UL;
-unsigned long init_pg_tables_end __initdata = ~0UL;
-
-/*
- * Machine setup..
- */
-static struct resource data_resource = {
- .name = "Kernel data",
- .start = 0,
- .end = 0,
- .flags = IORESOURCE_BUSY | IORESOURCE_MEM
-};
-
-static struct resource code_resource = {
- .name = "Kernel code",
- .start = 0,
- .end = 0,
- .flags = IORESOURCE_BUSY | IORESOURCE_MEM
-};
-
-static struct resource bss_resource = {
- .name = "Kernel bss",
- .start = 0,
- .end = 0,
- .flags = IORESOURCE_BUSY | IORESOURCE_MEM
-};
-
-static struct resource video_ram_resource = {
- .name = "Video RAM area",
- .start = 0xa0000,
- .end = 0xbffff,
- .flags = IORESOURCE_BUSY | IORESOURCE_MEM
-};
-
-/* cpu data as detected by the assembly code in head.S */
-struct cpuinfo_x86 new_cpu_data __cpuinitdata = { 0, 0, 0, 0, -1, 1, 0, 0, -1 };
-/* common cpu data for all cpus */
-struct cpuinfo_x86 boot_cpu_data __read_mostly = { 0, 0, 0, 0, -1, 1, 0, 0, -1 };
-EXPORT_SYMBOL(boot_cpu_data);
-
-unsigned int def_to_bigsmp;
-
-#ifndef CONFIG_X86_PAE
-unsigned long mmu_cr4_features;
-#else
-unsigned long mmu_cr4_features = X86_CR4_PAE;
-#endif
-
-/* for MCA, but anyone else can use it if they want */
-unsigned int machine_id;
-unsigned int machine_submodel_id;
-unsigned int BIOS_revision;
-
-/* Boot loader ID as an integer, for the benefit of proc_dointvec */
-int bootloader_type;
-
-/*
- * Early DMI memory
- */
-int dmi_alloc_index;
-char dmi_alloc_data[DMI_MAX_DATA];
-
-/*
- * Setup options
- */
-struct screen_info screen_info;
-EXPORT_SYMBOL(screen_info);
-struct apm_info apm_info;
-EXPORT_SYMBOL(apm_info);
-struct edid_info edid_info;
-EXPORT_SYMBOL_GPL(edid_info);
-struct ist_info ist_info;
-#if defined(CONFIG_X86_SPEEDSTEP_SMI) || \
- defined(CONFIG_X86_SPEEDSTEP_SMI_MODULE)
-EXPORT_SYMBOL(ist_info);
-#endif
-
-extern int root_mountflags;
-
-unsigned long saved_video_mode;
-
-#define RAMDISK_IMAGE_START_MASK 0x07FF
-#define RAMDISK_PROMPT_FLAG 0x8000
-#define RAMDISK_LOAD_FLAG 0x4000
-
-static char __initdata command_line[COMMAND_LINE_SIZE];
-
-#if defined(CONFIG_EDD) || defined(CONFIG_EDD_MODULE)
-struct edd edd;
-#ifdef CONFIG_EDD_MODULE
-EXPORT_SYMBOL(edd);
-#endif
-/**
- * copy_edd() - Copy the BIOS EDD information
- * from boot_params into a safe place.
- *
- */
-static inline void copy_edd(void)
-{
- memcpy(edd.mbr_signature, boot_params.edd_mbr_sig_buffer,
- sizeof(edd.mbr_signature));
- memcpy(edd.edd_info, boot_params.eddbuf, sizeof(edd.edd_info));
- edd.mbr_signature_nr = boot_params.edd_mbr_sig_buf_entries;
- edd.edd_info_nr = boot_params.eddbuf_entries;
-}
-#else
-static inline void copy_edd(void)
-{
-}
-#endif
-
-#ifdef CONFIG_BLK_DEV_INITRD
-
-static void __init relocate_initrd(void);
-
-static void __init reserve_initrd(void)
-{
- u64 ramdisk_image = boot_params.hdr.ramdisk_image;
- u64 ramdisk_size = boot_params.hdr.ramdisk_size;
- u64 ramdisk_end = ramdisk_image + ramdisk_size;
- u64 end_of_lowmem = max_low_pfn << PAGE_SHIFT;
- u64 ramdisk_here;
-
- if (!boot_params.hdr.type_of_loader ||
- !ramdisk_image || !ramdisk_size)
- return; /* No initrd provided by bootloader */
-
- initrd_start = 0;
-
- if (ramdisk_size >= (end_of_lowmem>>1)) {
- free_early(ramdisk_image, ramdisk_end);
- printk(KERN_ERR "initrd too large to handle, "
- "disabling initrd\n");
- return;
- }
-
- printk(KERN_INFO "old RAMDISK: %08llx - %08llx\n", ramdisk_image,
- ramdisk_end);
-
-
- if (ramdisk_end <= end_of_lowmem) {
- /* All in lowmem, easy case */
- /*
- * don't need to reserve again, already reserved early
- * in i386_start_kernel
- */
- initrd_start = ramdisk_image + PAGE_OFFSET;
- initrd_end = initrd_start + ramdisk_size;
- return;
- }
-
- /* We need to move the initrd down into lowmem */
- ramdisk_here = find_e820_area(0, end_of_lowmem, ramdisk_size,
- PAGE_SIZE);
-
- if (ramdisk_here == -1ULL)
- panic("Cannot find place for new RAMDISK of size %lld\n",
- ramdisk_size);
-
- /* Note: this includes all the lowmem currently occupied by
- the initrd, we rely on that fact to keep the data intact. */
- reserve_early(ramdisk_here, ramdisk_here + ramdisk_size,
- "NEW RAMDISK");
- initrd_start = ramdisk_here + PAGE_OFFSET;
- initrd_end = initrd_start + ramdisk_size;
- printk(KERN_INFO "Allocated new RAMDISK: %08llx - %08llx\n",
- ramdisk_here, ramdisk_here + ramdisk_size);
-
- relocate_initrd();
-}
-
-#define MAX_MAP_CHUNK (NR_FIX_BTMAPS << PAGE_SHIFT)
-
-static void __init relocate_initrd(void)
-{
- u64 ramdisk_image = boot_params.hdr.ramdisk_image;
- u64 ramdisk_size = boot_params.hdr.ramdisk_size;
- u64 end_of_lowmem = max_low_pfn << PAGE_SHIFT;
- u64 ramdisk_here;
- unsigned long slop, clen, mapaddr;
- char *p, *q;
-
- ramdisk_here = initrd_start - PAGE_OFFSET;
-
- q = (char *)initrd_start;
-
- /* Copy any lowmem portion of the initrd */
- if (ramdisk_image < end_of_lowmem) {
- clen = end_of_lowmem - ramdisk_image;
- p = (char *)__va(ramdisk_image);
- memcpy(q, p, clen);
- q += clen;
- ramdisk_image += clen;
- ramdisk_size -= clen;
- }
-
- /* Copy the highmem portion of the initrd */
- while (ramdisk_size) {
- slop = ramdisk_image & ~PAGE_MASK;
- clen = ramdisk_size;
- if (clen > MAX_MAP_CHUNK-slop)
- clen = MAX_MAP_CHUNK-slop;
- mapaddr = ramdisk_image & PAGE_MASK;
- p = early_ioremap(mapaddr, clen+slop);
- memcpy(q, p+slop, clen);
- early_iounmap(p, clen+slop);
- q += clen;
- ramdisk_image += clen;
- ramdisk_size -= clen;
- }
- /* high pages is not converted by early_res_to_bootmem */
- ramdisk_image = boot_params.hdr.ramdisk_image;
- ramdisk_size = boot_params.hdr.ramdisk_size;
- printk(KERN_INFO "Copied RAMDISK from %016llx - %016llx to %08llx - %08llx\n",
- ramdisk_image, ramdisk_image + ramdisk_size - 1,
- ramdisk_here, ramdisk_here + ramdisk_size - 1);
-
- /*
- * need to free old one, otherwise init cross max_low_pfn could be
- * converted to bootmem
- */
- free_early(ramdisk_image, ramdisk_image+ramdisk_size);
-}
-#else
-void __init reserve_initrd(void)
-{
-}
-#endif /* CONFIG_BLK_DEV_INITRD */
-
-#ifdef CONFIG_MCA
-static void set_mca_bus(int x)
-{
- MCA_bus = x;
-}
-#else
-static void set_mca_bus(int x) { }
-#endif
-
-/*
- * Determine if we were loaded by an EFI loader. If so, then we have also been
- * passed the efi memmap, systab, etc., so we should use these data structures
- * for initialization. Note, the efi init code path is determined by the
- * global efi_enabled. This allows the same kernel image to be used on existing
- * systems (with a traditional BIOS) as well as on EFI systems.
- */
-void __init setup_arch(char **cmdline_p)
-{
- memcpy(&boot_cpu_data, &new_cpu_data, sizeof(new_cpu_data));
- pre_setup_arch_hook();
- early_cpu_init();
- early_ioremap_init();
- reserve_setup_data();
-
- ROOT_DEV = old_decode_dev(boot_params.hdr.root_dev);
- screen_info = boot_params.screen_info;
- edid_info = boot_params.edid_info;
- apm_info.bios = boot_params.apm_bios_info;
- ist_info = boot_params.ist_info;
- saved_video_mode = boot_params.hdr.vid_mode;
- if( boot_params.sys_desc_table.length != 0 ) {
- set_mca_bus(boot_params.sys_desc_table.table[3] & 0x2);
- machine_id = boot_params.sys_desc_table.table[0];
- machine_submodel_id = boot_params.sys_desc_table.table[1];
- BIOS_revision = boot_params.sys_desc_table.table[2];
- }
- bootloader_type = boot_params.hdr.type_of_loader;
-
-#ifdef CONFIG_BLK_DEV_RAM
- rd_image_start = boot_params.hdr.ram_size & RAMDISK_IMAGE_START_MASK;
- rd_prompt = ((boot_params.hdr.ram_size & RAMDISK_PROMPT_FLAG) != 0);
- rd_doload = ((boot_params.hdr.ram_size & RAMDISK_LOAD_FLAG) != 0);
-#endif
-#ifdef CONFIG_EFI
- if (!strncmp((char *)&boot_params.efi_info.efi_loader_signature,
- "EL32", 4)) {
- efi_enabled = 1;
- efi_reserve_early();
- }
-#endif
-
- ARCH_SETUP
-
- setup_memory_map();
- copy_edd();
-
- if (!boot_params.hdr.root_flags)
- root_mountflags &= ~MS_RDONLY;
- init_mm.start_code = (unsigned long) _text;
- init_mm.end_code = (unsigned long) _etext;
- init_mm.end_data = (unsigned long) _edata;
- init_mm.brk = init_pg_tables_end + PAGE_OFFSET;
-
- code_resource.start = virt_to_phys(_text);
- code_resource.end = virt_to_phys(_etext)-1;
- data_resource.start = virt_to_phys(_etext);
- data_resource.end = virt_to_phys(_edata)-1;
- bss_resource.start = virt_to_phys(&__bss_start);
- bss_resource.end = virt_to_phys(&__bss_stop)-1;
-
- strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE);
- *cmdline_p = command_line;
-
- parse_setup_data();
-
- parse_early_param();
-
- if (acpi_mps_check()){
-#ifdef CONFIG_X86_LOCAL_APIC
- enable_local_apic = -1;
-#endif
- clear_cpu_cap(&boot_cpu_data, X86_FEATURE_APIC);
- }
-
- finish_e820_parsing();
-
- probe_roms();
-
- /* after parse_early_param, so could debug it */
- insert_resource(&iomem_resource, &code_resource);
- insert_resource(&iomem_resource, &data_resource);
- insert_resource(&iomem_resource, &bss_resource);
-
- if (efi_enabled)
- efi_init();
-
- if (ppro_with_ram_bug()) {
- e820_update_range(0x70000000ULL, 0x40000ULL, E820_RAM,
- E820_RESERVED);
- sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &e820.nr_map);
- printk(KERN_INFO "fixed physical RAM map:\n");
- e820_print_map("bad_ppro");
- }
-
- e820_register_active_regions(0, 0, -1UL);
- /*
- * partially used pages are not usable - thus
- * we are rounding upwards:
- */
- max_pfn = e820_end_of_ram();
-
- /* preallocate 4k for mptable mpc */
- early_reserve_e820_mpc_new();
- /* update e820 for memory not covered by WB MTRRs */
- mtrr_bp_init();
- if (mtrr_trim_uncached_memory(max_pfn)) {
- remove_all_active_ranges();
- e820_register_active_regions(0, 0, -1UL);
- max_pfn = e820_end_of_ram();
- }
-
- /* max_low_pfn get updated here */
- find_low_pfn_range();
-
- /* max_pfn_mapped is updated here */
- init_memory_mapping(0, (max_low_pfn << PAGE_SHIFT));
-
- reserve_initrd();
-
- dmi_scan_machine();
-
- io_delay_init();
-
- /*
- * Parse the ACPI tables for possible boot-time SMP configuration.
- */
- acpi_boot_table_init();
-
-#ifdef CONFIG_ACPI_NUMA
- /*
- * Parse SRAT to discover nodes.
- */
- acpi_numa_init();
-#endif
-
- initmem_init(0, max_pfn);
-
-#ifdef CONFIG_ACPI_SLEEP
- /*
- * Reserve low memory region for sleep support.
- */
- acpi_reserve_bootmem();
-#endif
-#ifdef CONFIG_X86_FIND_SMP_CONFIG
- /*
- * Find and reserve possible boot-time SMP configuration:
- */
- find_smp_config();
-#endif
- reserve_crashkernel();
-
- reserve_ibft_region();
-
-#ifdef CONFIG_KVM_CLOCK
- kvmclock_init();
-#endif
-
-#ifdef CONFIG_VMI
- /*
- * Must be after max_low_pfn is determined, and before kernel
- * pagetables are setup.
- */
- vmi_init();
-#endif
- /*
- * NOTE: before this point _nobody_ is allowed to allocate
- * any memory using the bootmem allocator. Although the
- * allocator is now initialised only the first 8Mb of the kernel
- * virtual address space has been mapped. All allocations before
- * paging_init() has completed must use the alloc_bootmem_low_pages()
- * variant (which allocates DMA'able memory) and care must be taken
- * not to exceed the 8Mb limit.
- */
-
- paging_init();
-
- /*
- * NOTE: On x86-32, only from this point on, fixmaps are ready for use.
- */
-
-#ifdef CONFIG_PROVIDE_OHCI1394_DMA_INIT
- if (init_ohci1394_dma_early)
- init_ohci1394_dma_on_all_controllers();
-#endif
-
-#ifdef CONFIG_X86_GENERICARCH
- generic_apic_probe();
-#endif
-
- early_quirks();
-
- /*
- * Read APIC and some other early information from ACPI tables.
- */
- acpi_boot_init();
-
-#if defined(CONFIG_X86_MPPARSE) || defined(CONFIG_X86_VISWS)
- /*
- * get boot-time SMP configuration:
- */
- if (smp_found_config)
- get_smp_config();
-#endif
-#if defined(CONFIG_SMP) && defined(CONFIG_X86_PC)
- if (def_to_bigsmp)
- printk(KERN_WARNING "More than 8 CPUs detected and "
- "CONFIG_X86_PC cannot handle it.\nUse "
- "CONFIG_X86_GENERICARCH or CONFIG_X86_BIGSMP.\n");
-#endif
- kvm_guest_init();
-
- e820_reserve_resources();
- e820_mark_nosave_regions(max_low_pfn);
-
- request_resource(&iomem_resource, &video_ram_resource);
- reserve_standard_io_resources();
-
- e820_setup_gap();
-
-#ifdef CONFIG_VT
-#if defined(CONFIG_VGA_CONSOLE)
- if (!efi_enabled || (efi_mem_type(0xa0000) != EFI_CONVENTIONAL_MEMORY))
- conswitchp = &vga_con;
-#elif defined(CONFIG_DUMMY_CONSOLE)
- conswitchp = &dummy_con;
-#endif
-#endif
-}
-

\
 
 \ /
  Last update: 2008-06-25 10:15    [W:0.133 / U:0.272 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site