lkml.org 
[lkml]   [2008]   [Jun]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [lm-sensors] LMSENSORS: 2.6.26-rc, enabling ACPI Termal Zone support costs sensors
Rene Herman wrote:
> Good day.
>
> On 2.6.26-rc and perhaps earlier, when I enable the ACPI Thermal Zone
> support (CONFIG_ACPI_THERMAL) I see in dmesg:
>
> ACPI: LNXTHERM:01 is registered as thermal_zone0
> ACPI: Thermal Zone [THRM] (56 C)
>
> My /sys/class/hwmon/hwmon0 (a W83782D chip) becomes hwmon1, there's a
> new /sys/class/hwmon/hwmon0 and "sensors -s" craps out with:
>
> # sensors -s
> Can't access procfs/sysfs file
> Kernel interface access error
> For 2.6 kernels, make sure you have mounted sysfs and libsensors
> was compiled with sysfs support!
>
> # sensors --version
> sensors version 2.10.6 with libsensors version 2.10.6
>
> This is the slackware 12.1 (recent) standard version. What's wrong?
>
> In case it's useful, my /etc/sensors.conf is at:
>
> http://members.home.nl/rene.herman/sensors.conf
>

I'm pretty sure this caused by your lm_sensors using space being too old to
support the new thermalzone stuff.

<Correction that should ofcourse read "userspace" not "using space", so the
correct reply I was trying to send is>:

I'm pretty sure this caused by your lm_sensors using space being too old to
support the new thermalzone stuff. You need atleast 3.0.2 to support the
thermalzone driver.

Regards,

Hans



\
 
 \ /
  Last update: 2008-06-22 09:29    [W:0.096 / U:1.116 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site