lkml.org 
[lkml]   [2008]   [Jun]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: hdparm -M acoustic management for sata disks?
From
Date
On Sat, 2008-06-21 at 10:00 -0400, Mark Lord wrote:
> Soeren Sonnenburg wrote:
> > Dear all,
> >
> > why is acoustic management via hdparm not supported for sata disks?
> >
> > # hdparm -M /dev/sda
> >
> > /dev/sda:
> > acoustic = not supported
> ..
>
> No, that means that your *drive* doesn't support it.
> Check for yourself, with "hdparm -I /dev/sda | grep Acoustic".

Just to be sure, did you mean grep acoustic (lowercase)? Because it is
listed there under Capabilities:
Recommended acoustic management value: 128, current value: 0

I've tried with the 5 sata drives I could get my hands on, they all list
some recommended acoustic management value but all fail the same way

# hdparm -M 128 /dev/sda

/dev/sda:
setting acoustic management to 128
HDIO_DRIVE_CMD:ACOUSTIC failed: Input/output error
acoustic = not supported

> ..
> > Is there any patch flying around that already enables this or even any
> > ETA in the current mainstream?
> ..
>
> No patch required -- hdparm (newer versions) already do this correctly.

I have hdparm v8.9 here, is that new enough?

Thanks for you help,
Soeren


\
 
 \ /
  Last update: 2008-06-21 18:45    [W:0.086 / U:0.200 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site