lkml.org 
[lkml]   [2008]   [Jun]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 39/70] tty-usb-generic: Code cleanup
Date
From: Alan Cox <alan@redhat.com>



Signed-off-by: Alan Cox <alan@redhat.com>
---

drivers/usb/serial/generic.c | 87 ++++++++++++++++++++++++------------------
1 files changed, 49 insertions(+), 38 deletions(-)


diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c
index 5128018..fe84c88 100644
--- a/drivers/usb/serial/generic.c
+++ b/drivers/usb/serial/generic.c
@@ -18,7 +18,7 @@
#include <linux/moduleparam.h>
#include <linux/usb.h>
#include <linux/usb/serial.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>


static int debug;
@@ -81,7 +81,7 @@ static int generic_probe(struct usb_interface *interface,
}
#endif

-int usb_serial_generic_register (int _debug)
+int usb_serial_generic_register(int _debug)
{
int retval = 0;

@@ -89,10 +89,11 @@ int usb_serial_generic_register (int _debug)
#ifdef CONFIG_USB_SERIAL_GENERIC
generic_device_ids[0].idVendor = vendor;
generic_device_ids[0].idProduct = product;
- generic_device_ids[0].match_flags = USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_PRODUCT;
+ generic_device_ids[0].match_flags =
+ USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_PRODUCT;

/* register our generic driver with ourselves */
- retval = usb_serial_register (&usb_serial_generic_device);
+ retval = usb_serial_register(&usb_serial_generic_device);
if (retval)
goto exit;
retval = usb_register(&generic_driver);
@@ -103,12 +104,12 @@ exit:
return retval;
}

-void usb_serial_generic_deregister (void)
+void usb_serial_generic_deregister(void)
{
#ifdef CONFIG_USB_SERIAL_GENERIC
/* remove our generic driver */
usb_deregister(&generic_driver);
- usb_serial_deregister (&usb_serial_generic_device);
+ usb_serial_deregister(&usb_serial_generic_device);
#endif
}

@@ -121,9 +122,9 @@ int usb_serial_generic_open(struct tty_struct *tty,

dbg("%s - port %d", __func__, port->number);

- /* force low_latency on so that our tty_push actually forces the data through,
- otherwise it is scheduled, and with high data rates (like with OHCI) data
- can get lost. */
+ /* force low_latency on so that our tty_push actually forces the data
+ through, otherwise it is scheduled, and with high data rates (like
+ with OHCI) data can get lost. */
if (tty)
tty->low_latency = 1;

@@ -136,8 +137,9 @@ int usb_serial_generic_open(struct tty_struct *tty,
/* if we have a bulk endpoint, start reading from it */
if (serial->num_bulk_in) {
/* Start reading from the device */
- usb_fill_bulk_urb (port->read_urb, serial->dev,
- usb_rcvbulkpipe(serial->dev, port->bulk_in_endpointAddress),
+ usb_fill_bulk_urb(port->read_urb, serial->dev,
+ usb_rcvbulkpipe(serial->dev,
+ port->bulk_in_endpointAddress),
port->read_urb->transfer_buffer,
port->read_urb->transfer_buffer_length,
((serial->type->read_bulk_callback) ?
@@ -146,7 +148,9 @@ int usb_serial_generic_open(struct tty_struct *tty,
port);
result = usb_submit_urb(port->read_urb, GFP_KERNEL);
if (result)
- dev_err(&port->dev, "%s - failed resubmitting read urb, error %d\n", __func__, result);
+ dev_err(&port->dev,
+ "%s - failed resubmitting read urb, error %d\n",
+ __func__, result);
}

return result;
@@ -194,10 +198,10 @@ int usb_serial_generic_resume(struct usb_serial *serial)
}

void usb_serial_generic_close(struct tty_struct *tty,
- struct usb_serial_port *port, struct file * filp)
+ struct usb_serial_port *port, struct file *filp)
{
dbg("%s - port %d", __func__, port->number);
- generic_cleanup (port);
+ generic_cleanup(port);
}

int usb_serial_generic_write(struct tty_struct *tty,
@@ -211,7 +215,7 @@ int usb_serial_generic_write(struct tty_struct *tty,

if (count == 0) {
dbg("%s - write request of 0 bytes", __func__);
- return (0);
+ return 0;
}

/* only do something if we have a bulk out endpoint */
@@ -226,27 +230,32 @@ int usb_serial_generic_write(struct tty_struct *tty,
port->write_urb_busy = 1;
spin_unlock_irqrestore(&port->lock, flags);

- count = (count > port->bulk_out_size) ? port->bulk_out_size : count;
+ count = (count > port->bulk_out_size) ?
+ port->bulk_out_size : count;

- memcpy (port->write_urb->transfer_buffer, buf, count);
+ memcpy(port->write_urb->transfer_buffer, buf, count);
data = port->write_urb->transfer_buffer;
usb_serial_debug_data(debug, &port->dev, __func__, count, data);

/* set up our urb */
- usb_fill_bulk_urb (port->write_urb, serial->dev,
- usb_sndbulkpipe (serial->dev,
- port->bulk_out_endpointAddress),
+ usb_fill_bulk_urb(port->write_urb, serial->dev,
+ usb_sndbulkpipe(serial->dev,
+ port->bulk_out_endpointAddress),
port->write_urb->transfer_buffer, count,
- ((serial->type->write_bulk_callback) ?
+ ((serial->type->write_bulk_callback) ?
serial->type->write_bulk_callback :
- usb_serial_generic_write_bulk_callback), port);
+ usb_serial_generic_write_bulk_callback),
+ port);

/* send the data out the bulk port */
port->write_urb_busy = 1;
result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
if (result) {
- dev_err(&port->dev, "%s - failed submitting write urb, error %d\n", __func__, result);
- /* don't have to grab the lock here, as we will retry if != 0 */
+ dev_err(&port->dev,
+ "%s - failed submitting write urb, error %d\n",
+ __func__, result);
+ /* don't have to grab the lock here, as we will
+ retry if != 0 */
port->write_urb_busy = 0;
} else
result = count;
@@ -258,7 +267,7 @@ int usb_serial_generic_write(struct tty_struct *tty,
return 0;
}

-int usb_serial_generic_write_room (struct tty_struct *tty)
+int usb_serial_generic_write_room(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
struct usb_serial *serial = port->serial;
@@ -302,17 +311,19 @@ static void resubmit_read_urb(struct usb_serial_port *port, gfp_t mem_flags)
int result;

/* Continue reading from device */
- usb_fill_bulk_urb (urb, serial->dev,
- usb_rcvbulkpipe (serial->dev,
- port->bulk_in_endpointAddress),
+ usb_fill_bulk_urb(urb, serial->dev,
+ usb_rcvbulkpipe(serial->dev,
+ port->bulk_in_endpointAddress),
urb->transfer_buffer,
urb->transfer_buffer_length,
- ((serial->type->read_bulk_callback) ?
- serial->type->read_bulk_callback :
+ ((serial->type->read_bulk_callback) ?
+ serial->type->read_bulk_callback :
usb_serial_generic_read_bulk_callback), port);
result = usb_submit_urb(urb, mem_flags);
if (result)
- dev_err(&port->dev, "%s - failed resubmitting read urb, error %d\n", __func__, result);
+ dev_err(&port->dev,
+ "%s - failed resubmitting read urb, error %d\n",
+ __func__, result);
}

/* Push data to tty layer and resubmit the bulk read URB */
@@ -349,16 +360,17 @@ void usb_serial_generic_read_bulk_callback(struct urb *urb)
return;
}

- usb_serial_debug_data(debug, &port->dev, __func__, urb->actual_length, data);
+ usb_serial_debug_data(debug, &port->dev, __func__,
+ urb->actual_length, data);

/* Throttle the device if requested by tty */
spin_lock_irqsave(&port->lock, flags);
- if (!(port->throttled = port->throttle_req)) {
+ port->throttled = port->throttle_req;
+ if (!port->throttled) {
spin_unlock_irqrestore(&port->lock, flags);
flush_and_resubmit_read_urb(port);
- } else {
+ } else
spin_unlock_irqrestore(&port->lock, flags);
- }
}
EXPORT_SYMBOL_GPL(usb_serial_generic_read_bulk_callback);

@@ -413,15 +425,14 @@ void usb_serial_generic_unthrottle(struct tty_struct *tty)
}
}

-void usb_serial_generic_shutdown (struct usb_serial *serial)
+void usb_serial_generic_shutdown(struct usb_serial *serial)
{
int i;

dbg("%s", __func__);

/* stop reads and writes on all ports */
- for (i=0; i < serial->num_ports; ++i) {
+ for (i = 0; i < serial->num_ports; ++i)
generic_cleanup(serial->port[i]);
- }
}



\
 
 \ /
  Last update: 2008-06-20 22:55    [W:0.195 / U:49.236 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site