lkml.org 
[lkml]   [2008]   [Jun]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH] Make rcutorture more vicious: reinstate boot-time testing
On Thu, Jun 19, 2008 at 02:17:25PM -0700, Randy Dunlap wrote:
> On Thu, 19 Jun 2008 08:58:54 -0700 Paul E. McKenney wrote:
>
> > On Thu, Jun 19, 2008 at 11:29:14AM +0200, Ingo Molnar wrote:
> > >
> > > * Paul E. McKenney <paulmck@linux.vnet.ibm.com> wrote:
> > >
> > > > Hello again!
> > > >
> >
> > Documentation/RCU/torture.txt | 21
> > Documentation/RCU/torture.txt.orig | 8
> ~~~~~
>
> > kernel/rcutorture.c | 14
> > kernel/rcutorture.c.orig | 59
> !!!!
>
> > kernel/sysctl.c | 13
> > kernel/sysctl.c.orig | 2851 +++++++++++++++++++++++++++++++++++++
> ~~~~
>
> > lib/Kconfig.debug | 20
> > lib/Kconfig.debug.orig | 679 ++++++++
> ~~~~
>
> What's with all of these .orig files, eh??

Gah, typos generating the diffs. :-/

> > 8 files changed, 3651 insertions(+), 14 deletions(-)

How about the following instead? (I expect to be following up with
a version that gets rid of the threads in response to writing a "0"
to /proc/sys/kernel/rcutorture_runnable later on.)

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
---

Documentation/RCU/torture.txt | 21 ++++++++++++++-------
kernel/rcutorture.c | 14 ++++++++++++--
kernel/sysctl.c | 13 +++++++++++++
lib/Kconfig.debug | 20 +++++++++++++++++++-
4 files changed, 58 insertions(+), 10 deletions(-)

diff -urpNa -X dontdiff linux-2.6.26-rc4-rcut1-stutter/Documentation/RCU/torture.txt linux-2.6.26-rc4-rcut2-proc/Documentation/RCU/torture.txt
--- linux-2.6.26-rc4-rcut1-stutter/Documentation/RCU/torture.txt 2008-06-18 05:15:43.000000000 -0700
+++ linux-2.6.26-rc4-rcut2-proc/Documentation/RCU/torture.txt 2008-06-18 08:11:19.000000000 -0700
@@ -10,13 +10,20 @@ status messages via printk(), which can
command (perhaps grepping for "torture"). The test is started
when the module is loaded, and stops when the module is unloaded.

-However, actually setting this config option to "y" results in the system
-running the test immediately upon boot, and ending only when the system
-is taken down. Normally, one will instead want to build the system
-with CONFIG_RCU_TORTURE_TEST=m and to use modprobe and rmmod to control
-the test, perhaps using a script similar to the one shown at the end of
-this document. Note that you will need CONFIG_MODULE_UNLOAD in order
-to be able to end the test.
+CONFIG_RCU_TORTURE_TEST_RUNNABLE
+
+It is also possible to specify CONFIG_RCU_TORTURE_TEST=y, which will
+result in the tests being loaded into the base kernel. In this case,
+the CONFIG_RCU_TORTURE_TEST_RUNNABLE config option is used to specify
+whether the RCU torture tests are to be started immediately during
+boot or whether the /proc/sys/kernel/rcutorture_runnable file is used
+to enable them. This /proc file can be used to repeatedly pause and
+restart the tests, regardless of the initial state specified by the
+CONFIG_RCU_TORTURE_TEST_RUNNABLE config option.
+
+You will normally -not- want to start the RCU torture tests during boot
+(and thus the default is CONFIG_RCU_TORTURE_TEST_RUNNABLE=n), but doing
+this can sometimes be useful in finding boot-time bugs.


MODULE PARAMETERS
diff -urpNa -X dontdiff linux-2.6.26-rc4-rcut1-stutter/kernel/rcutorture.c linux-2.6.26-rc4-rcut2-proc/kernel/rcutorture.c
--- linux-2.6.26-rc4-rcut1-stutter/kernel/rcutorture.c 2008-06-18 04:54:41.000000000 -0700
+++ linux-2.6.26-rc4-rcut2-proc/kernel/rcutorture.c 2008-06-19 04:48:56.000000000 -0700
@@ -125,6 +125,13 @@ static struct list_head rcu_torture_remo

static int stutter_pause_test = 0;

+#if defined(MODULE) || defined(CONFIG_RCU_TORTURE_TEST_RUNNABLE)
+#define RCUTORTURE_RUNNABLE_INIT 1
+#else
+#define RCUTORTURE_RUNNABLE_INIT 0
+#endif
+int rcutorture_runnable = RCUTORTURE_RUNNABLE_INIT;
+
/*
* Allocate an element from the rcu_tortures pool.
*/
@@ -188,8 +195,11 @@ rcu_random(struct rcu_random_state *rrsp
static void
rcu_stutter_wait(void)
{
- while (stutter_pause_test)
- schedule_timeout_interruptible(1);
+ while (stutter_pause_test || !rcutorture_runnable)
+ if (rcutorture_runnable)
+ schedule_timeout_interruptible(1);
+ else
+ schedule_timeout_interruptible(HZ);
}

/*
diff -urpNa -X dontdiff linux-2.6.26-rc4-rcut1-stutter/kernel/sysctl.c linux-2.6.26-rc4-rcut2-proc/kernel/sysctl.c
--- linux-2.6.26-rc4-rcut1-stutter/kernel/sysctl.c 2008-05-30 04:39:01.000000000 -0700
+++ linux-2.6.26-rc4-rcut2-proc/kernel/sysctl.c 2008-06-18 07:35:26.000000000 -0700
@@ -82,6 +82,9 @@ extern int maps_protect;
extern int sysctl_stat_interval;
extern int latencytop_enabled;
extern int sysctl_nr_open_min, sysctl_nr_open_max;
+#ifdef CONFIG_RCU_TORTURE_TEST
+extern int rcutorture_runnable;
+#endif /* #ifdef CONFIG_RCU_TORTURE_TEST */

/* Constants used for minimum and maximum */
#if defined(CONFIG_DETECT_SOFTLOCKUP) || defined(CONFIG_HIGHMEM)
@@ -813,6 +816,16 @@ static struct ctl_table kern_table[] = {
.child = key_sysctls,
},
#endif
+#ifdef CONFIG_RCU_TORTURE_TEST
+ {
+ .ctl_name = CTL_UNNUMBERED,
+ .procname = "rcutorture_runnable",
+ .data = &rcutorture_runnable,
+ .maxlen = sizeof(int),
+ .mode = 0644,
+ .proc_handler = &proc_dointvec,
+ },
+#endif
/*
* NOTE: do not add new entries to this table unless you have read
* Documentation/sysctl/ctl_unnumbered.txt
diff -urpNa -X dontdiff linux-2.6.26-rc4-rcut1-stutter/lib/Kconfig.debug linux-2.6.26-rc4-rcut2-proc/lib/Kconfig.debug
--- linux-2.6.26-rc4-rcut1-stutter/lib/Kconfig.debug 2008-05-30 04:39:01.000000000 -0700
+++ linux-2.6.26-rc4-rcut2-proc/lib/Kconfig.debug 2008-06-18 06:32:48.000000000 -0700
@@ -531,16 +531,34 @@ config BOOT_PRINTK_DELAY
config RCU_TORTURE_TEST
tristate "torture tests for RCU"
depends on DEBUG_KERNEL
- depends on m
default n
help
This option provides a kernel module that runs torture tests
on the RCU infrastructure. The kernel module may be built
after the fact on the running kernel to be tested, if desired.

+ Say Y here if you want RCU torture tests to be built into
+ the kernel.
Say M if you want the RCU torture tests to build as a module.
Say N if you are unsure.

+config RCU_TORTURE_TEST_RUNNABLE
+ bool "torture tests for RCU runnable by default"
+ depends on RCU_TORTURE_TEST = y
+ default n
+ help
+ This option provides a way to build the RCU torture tests
+ directly into the kernel without them starting up at boot
+ time. You can use /proc/sys/kernel/rcutorture_runnable
+ to manually override this setting. This /proc file is
+ available only when the RCU torture tests have been built
+ into the kernel.
+
+ Say Y here if you want the RCU torture tests to start during
+ boot (you probably don't).
+ Say N here if you want the RCU torture tests to start only
+ after being manually enabled via /proc.
+
config KPROBES_SANITY_TEST
bool "Kprobes sanity tests"
depends on DEBUG_KERNEL

\
 
 \ /
  Last update: 2008-06-20 07:51    [W:0.824 / U:0.204 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site