lkml.org 
[lkml]   [2008]   [Jun]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Subject[PATCH 4/5] x86_64 boot: extract common part of head32.c and head64.c into head.c
From
Date
This patch extracts the common part of head32.c and head64.c into head.c.

Signed-off-by: Huang Ying <ying.huang@intel.com>

---
arch/x86/Makefile | 1
arch/x86/kernel/Makefile | 2 -
arch/x86/kernel/head.c | 55 ++++++++++++++++++++++++++++++++++++++++++++
arch/x86/kernel/head32.c | 50 ----------------------------------------
arch/x86/kernel/head64.c | 50 ----------------------------------------
include/asm-x86/bios_ebda.h | 2 +
6 files changed, 59 insertions(+), 101 deletions(-)

--- /dev/null
+++ b/arch/x86/kernel/head.c
@@ -0,0 +1,55 @@
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/setup.h>
+#include <asm/bios_ebda.h>
+
+#define BIOS_LOWMEM_KILOBYTES 0x413
+
+/*
+ * The BIOS places the EBDA/XBDA at the top of conventional
+ * memory, and usually decreases the reported amount of
+ * conventional memory (int 0x12) too. This also contains a
+ * workaround for Dell systems that neglect to reserve EBDA.
+ * The same workaround also avoids a problem with the AMD768MPX
+ * chipset: reserve a page before VGA to prevent PCI prefetch
+ * into it (errata #56). Usually the page is reserved anyways,
+ * unless you have no PS/2 mouse plugged in.
+ */
+void __init reserve_ebda_region(void)
+{
+ unsigned int lowmem, ebda_addr;
+
+ /* To determine the position of the EBDA and the */
+ /* end of conventional memory, we need to look at */
+ /* the BIOS data area. In a paravirtual environment */
+ /* that area is absent. We'll just have to assume */
+ /* that the paravirt case can handle memory setup */
+ /* correctly, without our help. */
+ if (paravirt_enabled())
+ return;
+
+ /* end of low (conventional) memory */
+ lowmem = *(unsigned short *)__va(BIOS_LOWMEM_KILOBYTES);
+ lowmem <<= 10;
+
+ /* start of EBDA area */
+ ebda_addr = get_bios_ebda();
+
+ /* Fixup: bios puts an EBDA in the top 64K segment */
+ /* of conventional memory, but does not adjust lowmem. */
+ if ((lowmem - ebda_addr) <= 0x10000)
+ lowmem = ebda_addr;
+
+ /* Fixup: bios does not report an EBDA at all. */
+ /* Some old Dells seem to need 4k anyhow (bugzilla 2990) */
+ if ((ebda_addr == 0) && (lowmem >= 0x9f000))
+ lowmem = 0x9f000;
+
+ /* Paranoia: should never happen, but... */
+ if ((lowmem == 0) || (lowmem >= 0x100000))
+ lowmem = 0x9f000;
+
+ /* reserve all memory between lowmem and the 1MB mark */
+ reserve_early(lowmem, 0x100000, "BIOS reserved");
+}
--- a/arch/x86/kernel/head32.c
+++ b/arch/x86/kernel/head32.c
@@ -13,56 +13,6 @@
#include <asm/e820.h>
#include <asm/bios_ebda.h>

-#define BIOS_LOWMEM_KILOBYTES 0x413
-
-/*
- * The BIOS places the EBDA/XBDA at the top of conventional
- * memory, and usually decreases the reported amount of
- * conventional memory (int 0x12) too. This also contains a
- * workaround for Dell systems that neglect to reserve EBDA.
- * The same workaround also avoids a problem with the AMD768MPX
- * chipset: reserve a page before VGA to prevent PCI prefetch
- * into it (errata #56). Usually the page is reserved anyways,
- * unless you have no PS/2 mouse plugged in.
- */
-static void __init reserve_ebda_region(void)
-{
- unsigned int lowmem, ebda_addr;
-
- /* To determine the position of the EBDA and the */
- /* end of conventional memory, we need to look at */
- /* the BIOS data area. In a paravirtual environment */
- /* that area is absent. We'll just have to assume */
- /* that the paravirt case can handle memory setup */
- /* correctly, without our help. */
- if (paravirt_enabled())
- return;
-
- /* end of low (conventional) memory */
- lowmem = *(unsigned short *)__va(BIOS_LOWMEM_KILOBYTES);
- lowmem <<= 10;
-
- /* start of EBDA area */
- ebda_addr = get_bios_ebda();
-
- /* Fixup: bios puts an EBDA in the top 64K segment */
- /* of conventional memory, but does not adjust lowmem. */
- if ((lowmem - ebda_addr) <= 0x10000)
- lowmem = ebda_addr;
-
- /* Fixup: bios does not report an EBDA at all. */
- /* Some old Dells seem to need 4k anyhow (bugzilla 2990) */
- if ((ebda_addr == 0) && (lowmem >= 0x9f000))
- lowmem = 0x9f000;
-
- /* Paranoia: should never happen, but... */
- if ((lowmem == 0) || (lowmem >= 0x100000))
- lowmem = 0x9f000;
-
- /* reserve all memory between lowmem and the 1MB mark */
- reserve_early(lowmem, 0x100000, "BIOS reserved");
-}
-
void __init i386_start_kernel(void)
{
reserve_early(__pa_symbol(&_text), __pa_symbol(&_end), "TEXT DATA BSS");
--- a/arch/x86/kernel/head64.c
+++ b/arch/x86/kernel/head64.c
@@ -65,56 +65,6 @@ static void __init copy_bootdata(char *r
}
}

-#define BIOS_LOWMEM_KILOBYTES 0x413
-
-/*
- * The BIOS places the EBDA/XBDA at the top of conventional
- * memory, and usually decreases the reported amount of
- * conventional memory (int 0x12) too. This also contains a
- * workaround for Dell systems that neglect to reserve EBDA.
- * The same workaround also avoids a problem with the AMD768MPX
- * chipset: reserve a page before VGA to prevent PCI prefetch
- * into it (errata #56). Usually the page is reserved anyways,
- * unless you have no PS/2 mouse plugged in.
- */
-static void __init reserve_ebda_region(void)
-{
- unsigned int lowmem, ebda_addr;
-
- /* To determine the position of the EBDA and the */
- /* end of conventional memory, we need to look at */
- /* the BIOS data area. In a paravirtual environment */
- /* that area is absent. We'll just have to assume */
- /* that the paravirt case can handle memory setup */
- /* correctly, without our help. */
- if (paravirt_enabled())
- return;
-
- /* end of low (conventional) memory */
- lowmem = *(unsigned short *)__va(BIOS_LOWMEM_KILOBYTES);
- lowmem <<= 10;
-
- /* start of EBDA area */
- ebda_addr = get_bios_ebda();
-
- /* Fixup: bios puts an EBDA in the top 64K segment */
- /* of conventional memory, but does not adjust lowmem. */
- if ((lowmem - ebda_addr) <= 0x10000)
- lowmem = ebda_addr;
-
- /* Fixup: bios does not report an EBDA at all. */
- /* Some old Dells seem to need 4k anyhow (bugzilla 2990) */
- if ((ebda_addr == 0) && (lowmem >= 0x9f000))
- lowmem = 0x9f000;
-
- /* Paranoia: should never happen, but... */
- if ((lowmem == 0) || (lowmem >= 0x100000))
- lowmem = 0x9f000;
-
- /* reserve all memory between lowmem and the 1MB mark */
- reserve_early(lowmem, 0x100000, "BIOS reserved");
-}
-
static void __init reserve_setup_data(void)
{
struct setup_data *data;
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -2,7 +2,7 @@
# Makefile for the linux kernel.
#

-extra-y := head_$(BITS).o head$(BITS).o init_task.o vmlinux.lds
+extra-y := head_$(BITS).o head$(BITS).o head.o init_task.o vmlinux.lds

CPPFLAGS_vmlinux.lds += -U$(UTS_MACHINE)

--- a/include/asm-x86/bios_ebda.h
+++ b/include/asm-x86/bios_ebda.h
@@ -14,4 +14,6 @@ static inline unsigned int get_bios_ebda
return address; /* 0 means none */
}

+void reserve_ebda_region(void);
+
#endif /* _MACH_BIOS_EBDA_H */
--- a/arch/x86/Makefile
+++ b/arch/x86/Makefile
@@ -160,6 +160,7 @@ KBUILD_AFLAGS += $(mflags-y)

head-y := arch/x86/kernel/head_$(BITS).o
head-y += arch/x86/kernel/head$(BITS).o
+head-y += arch/x86/kernel/head.o
head-y += arch/x86/kernel/init_task.o

libs-y += arch/x86/lib/


\
 
 \ /
  Last update: 2008-06-02 08:27    [W:0.458 / U:0.156 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site