lkml.org 
[lkml]   [2008]   [Jun]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH 1/2] 8139too: clean up spaces and TABs
Date
On Saturday 14 June 2008 21:53:37 Stefan Richter wrote:
> Németh Márton wrote:
> > From: Márton Németh <nm127@freemail.hu>
> >
> > Clean up the following errors and warnings reported by checkpatch.pl:
>
> Is 8139too in active development or are there people actively fixing
> current bugs in it? If not, a whitespace cleanup may be considered a
> waste of time. There are even a few valid arguments that such changes
> are harmful then.

A more useful thing would be to merge 8139too and 8139cp drivers together so
user can just put RTL8139 card in the box and it will work. The current state
is completely broken - two drivers for two versions of the chip which have
the same PCI IDs.

>
> > - space prohibited between function name and open parenthesis '('
> > - space required before the open brace '{'
> > - code indent should use tabs where possible
> > - line over 80 characters
> > - spaces required around that '=' (ctx:VxW)
>
> Did you check that your whitespace changes are indeed only whitespace
> changes, i.e. that resulting assembler is unchanged? If you checked it,
> it's worth mentioning in the submission.
>
> > Signed-off-by: Márton Németh <nm127@freemail.hu>
> > ---
> > --- a/drivers/net/8139too.c 2008-06-14 00:20:47.000000000 +0200
> > +++ b/drivers/net/8139too.c 2008-06-14 20:32:45.000000000 +0200
> > @@ -11,7 +11,7 @@
> >
> > -----<snip>-----
> >
> > - Written 1997-2001 by Donald Becker.
> > + Written 1997-2001 by Donald Becker.
> > This software may be used and distributed according to the
> > terms of the GNU General Public License (GPL), incorporated
> > herein by reference. Drivers based on or derived from this
>
> This is not the canonical multi-line comment style.
>
> > @@ -116,8 +116,8 @@
> >
> > /* Default Message level */
> > #define RTL8139_DEF_MSG_ENABLE (NETIF_MSG_DRV | \
> > - NETIF_MSG_PROBE | \
> > - NETIF_MSG_LINK)
> > + NETIF_MSG_PROBE | \
> > + NETIF_MSG_LINK)
>
> Why change this?
>
> (Besides for the reason that checkpatch says that new patches /should/
> use tabs at such occasions, which also isn't universally agreed upon.)
>
> > /* enable PIO instead of MMIO, if CONFIG_8139TOO_PIO is selected */
> > @@ -134,7 +134,8 @@
> >
> > #if RTL8139_DEBUG
> > /* note: prints function name for you */
> > -# define DPRINTK(fmt, args...) printk(KERN_DEBUG "%s: " fmt,
> > __FUNCTION__ , ## args) +# define DPRINTK(fmt, args...) \
> > + printk(KERN_DEBUG "%s: " fmt, __FUNCTION__ , ## args)
> > #else
> > # define DPRINTK(fmt, args...)
> > #endif
>
> This line is merely 6 characters too long and does not contain anything
> particularly important. Why bother?
>
> > @@ -143,10 +144,10 @@
> > # define assert(expr) do {} while (0)
> > #else
> > # define assert(expr) \
> > - if(unlikely(!(expr))) { \
> > - printk(KERN_ERR "Assertion failed! %s,%s,%s,line=%d\n", \
> > - #expr,__FILE__,__FUNCTION__,__LINE__); \
> > - }
> > + if (unlikely(!(expr))) { \
> > + printk(KERN_ERR "Assertion failed! %s,%s,%s,line=%d\n", \
> > + #expr, __FILE__, __FUNCTION__, __LINE__); \
> > + }
> > #endif
> >
> >
> > @@ -196,7 +197,9 @@ static int debug = -1;
> > Threshold is bytes transferred to chip before transmission starts. */
> > #define TX_FIFO_THRESH 256 /* In bytes, rounded down to 32 byte units.
> > */
> >
> > -/* The following settings are log_2(bytes)-4: 0 == 16 bytes .. 6==1024,
> > 7==end of packet. */ +/* The following settings are log_2(bytes)-4:
> > + * 0 == 16 bytes .. 6==1024, 7==end of packet.
> > + */
> > #define RX_FIFO_THRESH 7 /* Rx buffer level before first PCI xfer. */
> > #define RX_DMA_BURST 7 /* Maximum PCI burst, '6' is 1024 */
> > #define TX_DMA_BURST 6 /* Maximum PCI burst, '6' is 1024 */
>
> This is not Linux multi-line comment style. (It comes close to the
> present style of 8139too.c though and may therefore be acceptable.)
>
> [...]
>
> > @@ -1253,57 +1280,59 @@ static int mdio_read (struct net_device
> > }
> >
> >
> > -static void mdio_write (struct net_device *dev, int phy_id, int
> > location, - int value)
> > +static void mdio_write(struct net_device *dev, int phy_id, int location,
> > + int value)
> > {
> > struct rtl8139_private *tp = netdev_priv(dev);
> > #ifdef CONFIG_8139TOO_8129
> > void __iomem *ioaddr = tp->mmio_addr;
> > - int mii_cmd = (0x5002 << 16) | (phy_id << 23) | (location << 18) |
> > value; + int mii_cmd = (0x5002 << 16) | (phy_id << 23) | (location << 18)
> > | + value;
> > int i;
>
> This decreases readability. You could leave this merely 81 columns long
> line as is. Or remove the superfluous parentheses.
>
> [...]
>
> > @@ -1945,22 +1978,22 @@ static int rtl8139_rx(struct net_device
> > rmb();
> >
> > /* read size+status of next frame from DMA ring buffer */
> > - rx_status = le32_to_cpu (*(__le32 *) (rx_ring + ring_offset));
> > + rx_status = le32_to_cpu(*(__le32 *) (rx_ring + ring_offset));
> > rx_size = rx_status >> 16;
> > pkt_size = rx_size - 4;
> >
> > if (netif_msg_rx_status(tp))
> > - printk(KERN_DEBUG "%s: rtl8139_rx() status %4.4x, size %4.4x,"
> > - " cur %4.4x.\n", dev->name, rx_status,
> > - rx_size, cur_rx);
> > + printk(KERN_DEBUG "%s: rtl8139_rx() status %4.4x, "
> > + "size %4.4x, cur %4.4x.\n",
> > + dev->name, rx_status, rx_size, cur_rx);
> > #if RTL8139_DEBUG > 2
> > {
> > int i;
> > - DPRINTK ("%s: Frame contents ", dev->name);
> > + DPRINTK("%s: Frame contents ", dev->name);
> > for (i = 0; i < 70; i++)
> > - printk (" %2.2x",
> > - rx_ring[ring_offset + i]);
> > - printk (".\n");
> > + printk(" %2.2x",
> > + rx_ring[ring_offset + i]);
> > + printk(".\n");
> > }
> > #endif
>
> This printk trick does not work BTW. But it should of course not be
> fixed in a patch which is meant to be a whitespace change only.
>
> [...]



--
Ondrej Zary
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2008-06-14 23:35    [W:0.085 / U:0.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site