lkml.org 
[lkml]   [2008]   [Jun]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Subject[PATCH 11/18] ide-cd: move request prep from cdrom_start_rw_cont to rq issue path
Date
From
... by factoring out the rq preparation code into a separate
function called in the request routine. Bart: As a nice
side effect, this minimizes the IRQ handler execution time.

There should be no functionality change resulting from this patch.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
---
drivers/ide/ide-cd.c | 29 ++++++++++++++++++++---------
1 files changed, 20 insertions(+), 9 deletions(-)

diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
index da0f28c..a5715b1 100644
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -691,16 +691,9 @@ static int ide_cd_check_transfer_size(ide_drive_t *drive, int len)

static ide_startstop_t cdrom_newpc_intr(ide_drive_t *);

-/*
- * Routine to send a read/write packet command to the drive. This is usually
- * called directly from cdrom_start_{read,write}(). However, for drq_interrupt
- * devices, it is called from an interrupt when the drive is ready to accept
- * the command.
- */
-static ide_startstop_t cdrom_start_rw_cont(ide_drive_t *drive)
+static ide_startstop_t ide_cd_prepare_rw_request(ide_drive_t *drive,
+ struct request *rq)
{
- struct request *rq = HWGROUP(drive)->rq;
-
if (rq_data_dir(rq) == READ) {
unsigned short sectors_per_frame =
queue_hardsect_size(drive->queue) >> SECTOR_BITS;
@@ -737,6 +730,19 @@ static ide_startstop_t cdrom_start_rw_cont(ide_drive_t *drive)
/* set up the command */
rq->timeout = ATAPI_WAIT_PC;

+ return ide_started;
+}
+
+/*
+ * Routine to send a read/write packet command to the drive. This is usually
+ * called directly from cdrom_start_{read,write}(). However, for drq_interrupt
+ * devices, it is called from an interrupt when the drive is ready to accept
+ * the command.
+ */
+static ide_startstop_t cdrom_start_rw_cont(ide_drive_t *drive)
+{
+ struct request *rq = HWGROUP(drive)->rq;
+
/* send the command to the drive and return */
return cdrom_transfer_packet_command(drive, rq, cdrom_newpc_intr);
}
@@ -1238,10 +1244,15 @@ static ide_startstop_t ide_cd_do_request(ide_drive_t *drive, struct request *rq,
} else {
xferlen = 32768;
fn = cdrom_start_rw_cont;
+
if (cdrom_start_rw(drive, rq) == ide_stopped)
return ide_stopped;
+
+ if (ide_cd_prepare_rw_request(drive, rq) == ide_stopped)
+ return ide_stopped;
}
info->last_block = block;
+
} else if (blk_sense_request(rq) || blk_pc_request(rq) ||
rq->cmd_type == REQ_TYPE_ATA_PC) {
xferlen = rq->data_len;
--
1.5.5.1


\
 
 \ /
  Last update: 2008-06-12 08:49    [from the cache]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and my Meterkast|Read the blog