lkml.org 
[lkml]   [2008]   [May]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 01/56] microblaze_v2: Kconfig patches
Date
From: Michal Simek <monstr@monstr.eu>


Signed-off-by: Michal Simek <monstr@monstr.eu>
---
arch/microblaze/Kconfig | 149 +++++++++++++++++++++++++
arch/microblaze/Kconfig.debug | 35 ++++++
arch/microblaze/platform/Kconfig.platform | 63 +++++++++++
arch/microblaze/platform/generic/Kconfig.auto | 52 +++++++++
4 files changed, 299 insertions(+), 0 deletions(-)
create mode 100644 arch/microblaze/Kconfig
create mode 100644 arch/microblaze/Kconfig.debug
create mode 100644 arch/microblaze/platform/Kconfig.platform
create mode 100644 arch/microblaze/platform/generic/Kconfig.auto

diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig
new file mode 100644
index 0000000..49767d1
--- /dev/null
+++ b/arch/microblaze/Kconfig
@@ -0,0 +1,149 @@
+# For a description of the syntax of this configuration file,
+# see Documentation/kbuild/kconfig-language.txt.
+
+mainmenu "Linux/Microblaze Kernel Configuration"
+
+config MICROBLAZE
+ def_bool y
+ select HAVE_LMB
+
+config MMU
+ def_bool n
+
+config SWAP
+ def_bool n
+
+config RWSEM_GENERIC_SPINLOCK
+ def_bool y
+
+config RWSEM_XCHGADD_ALGORITHM
+ bool
+
+config ARCH_HAS_ILOG2_U32
+ def_bool n
+
+config ARCH_HAS_ILOG2_U64
+ def_bool n
+
+config GENERIC_FIND_NEXT_BIT
+ def_bool y
+
+config GENERIC_HWEIGHT
+ def_bool y
+
+config GENERIC_HARDIRQS
+ def_bool y
+
+config GENERIC_IRQ_PROBE
+ def_bool y
+
+config GENERIC_CALIBRATE_DELAY
+ def_bool y
+
+config PCI
+ def_bool n
+
+config NO_DMA
+ def_bool y
+
+config UID16
+ def_bool y
+
+config HZ
+ int
+ default 100
+
+config DEFCONFIG_LIST
+ string
+ default "arch/$ARCH/defconfig"
+
+source "init/Kconfig"
+
+source "arch/microblaze/platform/Kconfig.platform"
+
+menu "Processor type and features"
+
+config PREEMPT
+ bool "Preemptible Kernel"
+ help
+ This option reduces the latency of the kernel when reacting to
+ real-time or interactive events by allowing a low priority process to
+ be preempted even if it is in kernel mode executing a system call.
+ This allows applications to run more reliably even when the system is
+ under load.
+
+ Say Y here if you are building a kernel for a desktop, embedded
+ or real-time system. Say N if you are unsure.
+
+config PREEMPT_TIMES
+ bool "Collect preemption latency times"
+ depends on PREEMPT
+ help
+ Allow collection for preemption latency times.
+
+config XILINX_UNCACHED_SHADOW
+ bool "Are you using uncached shadow for RAM ?"
+ depends on MICROBLAZE
+ default y
+ help
+ This is needed to be able to allocate uncachable memory regions.
+ The feature requires the design to define the RAM memory controller window
+ to be twice as large as the actual physical memory.
+
+config LARGE_ALLOCS
+ bool "Allow allocating large blocks (> 1MB) of memory"
+ help
+ Allow the slab memory allocator to keep chains for very large
+ memory sizes - up to 32MB. You may need this if your system has
+ a lot of RAM, and you need to able to allocate very large
+ contiguous chunks. If unsure, say N.
+
+comment "Boot options"
+
+config CMDLINE
+ string "Default kernel command string"
+ default ""
+ help
+ On some architectures there is currently no way for the boot loader
+ to pass arguments to the kernel. For these architectures, you should
+ supply some command-line options at build time by entering them
+ here.
+
+config CMDLINE_FORCE
+ bool "Force default kernel command string"
+ help
+ Set this to have arguments from the default kernel command string
+ override those passed by the boot loader.
+
+config OF
+ def_bool y
+
+config OF_DEVICE
+ def_bool y
+
+endmenu
+
+config APM_EMULATION
+ bool
+
+source "mm/Kconfig"
+
+menu "Exectuable file formats"
+
+source "fs/Kconfig.binfmt"
+
+endmenu
+
+source "net/Kconfig"
+
+source "drivers/Kconfig"
+
+source "fs/Kconfig"
+
+source "arch/microblaze/Kconfig.debug"
+
+source "security/Kconfig"
+
+source "crypto/Kconfig"
+
+source "lib/Kconfig"
diff --git a/arch/microblaze/Kconfig.debug b/arch/microblaze/Kconfig.debug
new file mode 100644
index 0000000..d15f8b0
--- /dev/null
+++ b/arch/microblaze/Kconfig.debug
@@ -0,0 +1,35 @@
+# For a description of the syntax of this configuration file,
+# see Documentation/kbuild/kconfig-language.txt.
+
+menu "Kernel hacking"
+
+source "lib/Kconfig.debug"
+
+config EARLY_PRINTK
+ def_bool y
+
+config EARLY_PRINTK_UARTLITE_ADDRESS
+ hex "Physical address where UART Lite for early printk is mapped"
+ depends on EARLY_PRINTK
+ default "0x40100000"
+ help
+ Please enter physical address where your uart lite is mapped.
+
+config HEART_BEAT
+ bool "Heart beat function for kernel"
+ help
+ This option turns on/off heart beat kernel functionality on selected
+ GPIO address.
+
+config HEART_BEAT_ADDRESS
+ hex "Physical address for heart beat LED"
+ depends on HEART_BEAT
+ default "0x40600000"
+ help
+ Please enter physical address GPIO LED.
+
+config DEBUG_BOOTMEM
+ depends on DEBUG_KERNEL
+ bool "Debug BOOTMEM initialization"
+
+endmenu
diff --git a/arch/microblaze/platform/Kconfig.platform b/arch/microblaze/platform/Kconfig.platform
new file mode 100644
index 0000000..64cbb80
--- /dev/null
+++ b/arch/microblaze/platform/Kconfig.platform
@@ -0,0 +1,63 @@
+# For a description of the syntax of this configuration file,
+# see Documentation/kbuild/kconfig-language.txt.
+#
+# Platform selection Kconfig menu for MicroBlaze targets
+#
+
+menu "Platform options"
+choice
+ prompt "Platform"
+ default PLATFORM_MICROBLAZE_AUTO
+ help
+ Choose which hardware board/platform you are targeting.
+
+config PLATFORM_GENERIC
+ bool "Generic"
+ help
+ Choose this option for the Generic platform.
+
+endchoice
+
+config HACK
+ bool "Increase performance"
+ default y
+
+config OPT_LIB_FUNCTION
+ bool "Optimalized lib function"
+ default y
+ help
+ Allows turn on optimalized library function (memcpy and memmove).
+ They are optimized by using unsigned alignment. This will work
+ fine if both source and destination are aligned on the same
+ boundary. However, if they are aligned on different boundaries
+ shifts will be necessary. This might result in bad performance
+ on MicroBlaze systems without a barrel shifter.
+
+# This is still a bit broken - disabling for now JW 20070504
+config ALLOW_EDIT_AUTO
+ bool "Permit Display/edit of Kconfig.auto platform settings"
+ default n
+ help
+ Allows the editing of auto-generated platform settings from
+ the Kconfig.auto file. Obviously this does not change the
+ underlying hardware, so be very careful if you go editing
+ these settings.
+
+ Also, if you enable this, and edit various Kconfig.auto
+ settings, YOUR CHANGES WILL BE LOST if you then disable it
+ again. You have been warned!
+
+ If unsure, say no.
+
+# Ok, the platform is chosen. Source the kconfig.auto to get all of the
+# system settings.
+# If user selected CONFIG_EDIT_AUTO, these will be rendered in gory detail
+# and be able to be edited
+comment "Automatic platform settings from Kconfig.auto"
+ depends on ALLOW_EDIT_AUTO
+
+if PLATFORM_GENERIC=y
+ source "arch/microblaze/platform/generic/Kconfig.auto"
+endif
+
+endmenu
diff --git a/arch/microblaze/platform/generic/Kconfig.auto b/arch/microblaze/platform/generic/Kconfig.auto
new file mode 100644
index 0000000..5dc8c15
--- /dev/null
+++ b/arch/microblaze/platform/generic/Kconfig.auto
@@ -0,0 +1,52 @@
+# For a description of the syntax of this configuration file,
+# see Documentation/kbuild/kconfig-language.txt.
+#
+# Platform Kconfig menu for Microblaze generic board
+#
+
+comment "Definitions for MICROBLAZE0"
+ depends on ALLOW_EDIT_AUTO
+
+config KERNEL_BASE_ADDR
+ hex "Physical address where Linux Kernel is"
+ default "0x20000000"
+ help
+ BASE Address for kernel
+
+config XILINX_ERAM_SIZE
+ hex "Memory size of XILINX_RAM"
+ depends on XILINX_UNCACHED_SHADOW
+ default 0x02000000
+
+config XILINX_MICROBLAZE0_FAMILY
+ string "Targetted FPGA family" if ALLOW_EDIT_AUTO
+ default spartan3e
+
+config XILINX_MICROBLAZE0_HW_VER
+ string "Core version number" if ALLOW_EDIT_AUTO
+ default 5.00.c
+
+config XILINX_MICROBLAZE0_USE_MSR_INSTR
+ int "USE_MSR_INSTR" if ALLOW_EDIT_AUTO
+ default 1
+ range 0 1
+
+config XILINX_MICROBLAZE0_USE_BARREL
+ int "USE_BARREL" if ALLOW_EDIT_AUTO
+ default 1
+ range 0 1
+
+config XILINX_MICROBLAZE0_USE_DIV
+ int "USE_DIV" if ALLOW_EDIT_AUTO
+ default 1
+ range 0 1
+
+config XILINX_MICROBLAZE0_USE_HW_MUL
+ int "USE_HW_MUL" if ALLOW_EDIT_AUTO
+ default 1
+ range 0 2
+
+config XILINX_MICROBLAZE0_USE_FPU
+ int "USE_FPU" if ALLOW_EDIT_AUTO
+ default 0
+ range 0 1
--
1.5.4.GIT


\
 
 \ /
  Last update: 2008-05-05 14:27    [W:0.318 / U:46.760 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site