lkml.org 
[lkml]   [2008]   [May]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: Remove Asus EEE UDMA/33 limitation.
Alan Cox wrote:
> On Sat, 3 May 2008 10:58:17 +0100
> Matthew Garrett <mjg59@srcf.ucam.org> wrote:
>
>> On Fri, May 02, 2008 at 11:44:58AM -0400, Dave Jones wrote:
>>
>>> static const struct ich_laptop ich_laptop[] = {
>>> /* devid, subvendor, subdev */
>>> + { 0x2653, 0x1043, 0x82d8 }, /* ICH6M on Asus Eee PC */
>>> { 0x27DF, 0x0005, 0x0280 }, /* ICH7 on Acer 5602WLMi */
>>> { 0x27DF, 0x1025, 0x0102 }, /* ICH7 on Acer 5602aWLMi */
>>> { 0x27DF, 0x1025, 0x0110 }, /* ICH7 on Acer 3682WLMi */
>> Don't the ACPI timing methods let us work this out without requiring
>> machine specific knowledge?
>
> We don't currently sniff the ACPI timing data on Intel boxes - we can do
> so and there is a library routine but I'd be worried about the usual
> standard of BIOS code. Right now we only do it for chipsets which are so
> braindamaged we have no other choice or where the vendor specifically
> implemented and intended the ACPI data to be used for this (eg Nvidia)

Given that the bootup ACPI _GTM results will be used by Windows to
determine the DMA mode setting with the standard Microsoft atapi.sys
driver which PATA controllers would typically use, and Windows is what
the majority of this hardware was designed to run, I think it should be
quite trustworthy..


\
 
 \ /
  Last update: 2008-05-03 21:37    [W:0.024 / U:0.208 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site