lkml.org 
[lkml]   [2008]   [May]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] Re: [Bug #10713] ehci splatter in 2.6.26-rc2
On Tue, May 20, 2008 at 10:04:42AM -0400, Alan Stern wrote:

> > > > > This message has been generated automatically as a part of a report
> > > > > of recent regressions.
> > > > >
> > > > > The following bug entry is on the current list of known regressions
> > > > > from 2.6.25. Please verify if it still should be listed.
> > > > >
> > > > >
> > > > > Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=10713
> > > > > Subject : ehci splatter in 2.6.26-rc2
> > > > > Submitter : Lennert Buytenhek <buytenh@wantstofly.org>
> > > > > Date : 2008-05-14 11:24 (5 days old)
> > > > > References : http://marc.info/?l=linux-kernel&amp;m=121076435420129&amp;w=4
> > > > > Handled-By : David Brownell <david-b@pacbell.net>
> > > >
> > > > Just re-checked, and this device (a USB to dual PS/2 cable) works
> > > > fine on 2.6.25 on this hardware:
> > > >
> > > > usb 1-1: new low speed USB device using orion-ehci and address 2
> > > > usb 1-1: configuration #1 chosen from 1 choice
> > > > input: PS2 to USB AdapterA3 as /class/input/input0
> > > > input: USB HID v1.10 Keyboard [PS2 to USB AdapterA3] on usb-orion-ehci.0-1
> > > > input: PS2 to USB AdapterA3 as /class/input/input1
> > > > input: USB HID v1.10 Mouse [PS2 to USB AdapterA3] on usb-orion-ehci.0-1
> > > >
> > > > But on 2.6.26-rc3 it just gives me:
> > > >
> > > > usb 1-1: new low speed USB device using orion-ehci and address 2
> > > > Unable to handle kernel NULL pointer dereference at virtual address 00000000
> > > > pgd = c0004000
> > > > [00000000] *pgd=00000000
> > > > Internal error: Oops: 5 [#1] PREEMPT
> > > > Modules linked in:
> > > > CPU: 0 Not tainted (2.6.26-rc3 #347)
> > > > PC is at qh_append_tds+0x24c/0x47c
> > > > LR is at ehci_qtd_alloc+0x30/0x5c
> > > > pc : [<c0242374>] lr : [<c0241d48>] psr: 00000093
> > > > sp : c7cfdcb0 ip : c7e3c4c0 fp : c7cfdcfc
> > > > r10: ffc83080 r9 : 00000008 r8 : c7d12240
> > > > r7 : 80000080 r6 : 00000080 r5 : 00000000 r4 : 00000002
> > > > r3 : c7d3f000 r2 : 00000000 r1 : 40800000 r0 : 08085000
> > > > Flags: nzcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel
> > > > Control: 0005317f Table: 00004000 DAC: 00000017
> > > > Process khubd (pid: 79, stack limit = 0xc7cfc268)
> > > > Stack: (0xc7cfdcb0 to 0xc7cfe000)
> > > > [...]
> > > > Backtrace:
> > > > [<c0242128>] (qh_append_tds+0x0/0x47c) from [<c0243ca0>] (ehci_urb_enqueue+0x100/0xff4)
> > > > [<c0243ba0>] (ehci_urb_enqueue+0x0/0xff4) from [<c0234c30>] (usb_hcd_submit_urb+0x824/0x91c)
> > > > [<c023440c>] (usb_hcd_submit_urb+0x0/0x91c) from [<c0235098>] (usb_submit_urb+0x224/0x260)
> > > > [<c0234e74>] (usb_submit_urb+0x0/0x260) from [<c0235b5c>] (usb_start_wait_urb+0x44/0xac)
> > > > r6:c7d12240 r5:c7cfde80 r4:00000000
> > > > [<c0235b18>] (usb_start_wait_urb+0x0/0xac) from [<c0235dac>] (usb_control_msg+0xc8/0xec)
> > > > r8:00000000 r7:00000100 r6:fffffff4 r5:00000040 r4:c7e3dc20
> > > > [<c0235ce4>] (usb_control_msg+0x0/0xec) from [<c0230854>] (hub_port_init+0x274/0x5e4)
> > > > [<c02305e0>] (hub_port_init+0x0/0x5e4) from [<c0231bec>] (hub_thread+0x608/0xc10)
> > > > [<c02315e4>] (hub_thread+0x0/0xc10) from [<c0059e20>] (kthread+0x5c/0x94)
> > > > [<c0059dc4>] (kthread+0x0/0x94) from [<c0047908>] (do_exit+0x0/0x67c)
> > > > r6:00000000 r5:00000000 r4:00000000
> > > > Code: e51bc040 e5932000 e51c309c e1520003 (15923000)
> > > > ---[ end trace ce1992535f2e8e4d ]---
> > > > note: khubd[79] exited with preempt_count 1
> > > >
> > > > If you have no idea what might have caused this to creep in, I guess
> > > > I'll have to bisect it?
> > >
> > > A bisect turns up this:
> > >
> > > 7329e211b987a493cbcfca0e98c60eb108ab42df is first bad commit
> > > commit 7329e211b987a493cbcfca0e98c60eb108ab42df
> > > Author: Alan Stern <stern@rowland.harvard.edu>
> > > Date: Thu Apr 3 18:02:56 2008 -0400
> > >
> > > USB: root hubs don't lie about their number of TTs
> > >
> > > Currently EHCI root hubs enumerate with a bDeviceProtocol code
> > > indicating that they possess a Transaction Translator. However the
> > > vast majority of controllers do not; they rely on a companion
> > > controller to handle full- and low-speed communications. This patch
> > > (as1064) changes the root-hub device descriptor to match the actual
> > > situation.
> > >
> > > Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
> > > Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
> > >
> > > And indeed, reverting this commit from 2.6.26-rc3 makes my system
> > > stop oopsing when I plug in the USB-PS/2 adapter (a low speed device),
> > > and makes it work again as it did in 2.6.25.
> >
> > This patch appears to fix it:
> >
> >
> > The Orion EHCI root hub does have a built-in Transaction Translator.
> >
> > Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
> >
> > Index: linux-2.6.26-rc3/drivers/usb/host/ehci-orion.c
> > ===================================================================
> > --- linux-2.6.26-rc3.orig/drivers/usb/host/ehci-orion.c
> > +++ linux-2.6.26-rc3/drivers/usb/host/ehci-orion.c
> > @@ -115,6 +115,8 @@ static int ehci_orion_setup(struct usb_h
> > if (retval)
> > return retval;
> >
> > + hcd->has_tt = 1;
> > +
> > ehci_reset(ehci);
> > ehci_port_power(ehci, 0);
>
> Pardon me for being puzzled, but I don't see how that change could
> possibly have any effect on the problem you saw.
>
> Nor do I see how the patch you identified could have caused any
> problems.

Well. I just re-tested it a couple more times to be sure, and the
"hcd->has_tt = 1;" line does make all the difference in the world when
it comes to getting oopses on plugging in low speed USB devices on this
board. So if you don't understand what's going on then I guess I don't
either.


> That has_tt flag isn't used anywhere in ehci-hcd (it is only
> ever set, never read), and the only place it is used in usbcore is for
> adjusting the root hub's device descriptor.

Maybe this code in drivers/usb/core/hub.c has something to do with
it?

switch (hdev->descriptor.bDeviceProtocol) {
case 0:
break;
case 1:
dev_dbg(hub_dev, "Single TT\n");
hub->tt.hub = hdev;
break;
case 2:
ret = usb_set_interface(hdev, 0, 1);
if (ret == 0) {
dev_dbg(hub_dev, "TT per port\n");
hub->tt.multi = 1;
} else
dev_err(hub_dev, "Using single TT (err %d)\n",
ret);
hub->tt.hub = hdev;
break;
default:
dev_dbg(hub_dev, "Unrecognized hub protocol %d\n",
hdev->descriptor.bDeviceProtocol);
break;
}


\
 
 \ /
  Last update: 2008-05-20 17:03    [W:0.143 / U:0.144 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site