lkml.org 
[lkml]   [2008]   [May]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
Subject[PATCH 004 of 10] md: md: raid5 rate limit error printk

From: Bernd Schubert <bernd-schubert@gmx.de>

last night we had scsi problems and a hardware raid
unit was offlined during heavy i/o. While this happened we got for
about 3 minutes a huge number messages like these

Apr 12 03:36:07 pfs1n14 kernel: [197510.696595] raid5:md7: read error not correctable (sector 2993096568 on sdj2).

I guess the high error rate is responsible for not scheduling other
events - during this time the system was not pingable and in the end
also other devices run into scsi command timeouts causing problems on
these unrelated devices as well.

Signed-off-by: Bernd Schubert <bernd-schubert@gmx.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Neil Brown <neilb@suse.de>

### Diffstat output
./drivers/md/raid5.c | 34 ++++++++++++++++++++++------------
1 file changed, 22 insertions(+), 12 deletions(-)

diff .prev/drivers/md/raid5.c ./drivers/md/raid5.c
--- .prev/drivers/md/raid5.c 2008-05-19 11:02:09.000000000 +1000
+++ ./drivers/md/raid5.c 2008-05-19 11:02:44.000000000 +1000
@@ -94,6 +94,8 @@
#define __inline__
#endif

+#define printk_rl(args...) ((void) (printk_ratelimit() && printk(args)))
+
#if !RAID6_USE_EMPTY_ZERO_PAGE
/* In .bss so it's zeroed */
const char raid6_empty_zero_page[PAGE_SIZE] __attribute__((aligned(256)));
@@ -1143,10 +1145,12 @@ static void raid5_end_read_request(struc
set_bit(R5_UPTODATE, &sh->dev[i].flags);
if (test_bit(R5_ReadError, &sh->dev[i].flags)) {
rdev = conf->disks[i].rdev;
- printk(KERN_INFO "raid5:%s: read error corrected (%lu sectors at %llu on %s)\n",
- mdname(conf->mddev), STRIPE_SECTORS,
- (unsigned long long)(sh->sector + rdev->data_offset),
- bdevname(rdev->bdev, b));
+ printk_rl(KERN_INFO "raid5:%s: read error corrected"
+ " (%lu sectors at %llu on %s)\n",
+ mdname(conf->mddev), STRIPE_SECTORS,
+ (unsigned long long)(sh->sector
+ + rdev->data_offset),
+ bdevname(rdev->bdev, b));
clear_bit(R5_ReadError, &sh->dev[i].flags);
clear_bit(R5_ReWrite, &sh->dev[i].flags);
}
@@ -1160,16 +1164,22 @@ static void raid5_end_read_request(struc
clear_bit(R5_UPTODATE, &sh->dev[i].flags);
atomic_inc(&rdev->read_errors);
if (conf->mddev->degraded)
- printk(KERN_WARNING "raid5:%s: read error not correctable (sector %llu on %s).\n",
- mdname(conf->mddev),
- (unsigned long long)(sh->sector + rdev->data_offset),
- bdn);
+ printk_rl(KERN_WARNING
+ "raid5:%s: read error not correctable "
+ "(sector %llu on %s).\n",
+ mdname(conf->mddev),
+ (unsigned long long)(sh->sector
+ + rdev->data_offset),
+ bdn);
else if (test_bit(R5_ReWrite, &sh->dev[i].flags))
/* Oh, no!!! */
- printk(KERN_WARNING "raid5:%s: read error NOT corrected!! (sector %llu on %s).\n",
- mdname(conf->mddev),
- (unsigned long long)(sh->sector + rdev->data_offset),
- bdn);
+ printk_rl(KERN_WARNING
+ "raid5:%s: read error NOT corrected!! "
+ "(sector %llu on %s).\n",
+ mdname(conf->mddev),
+ (unsigned long long)(sh->sector
+ + rdev->data_offset),
+ bdn);
else if (atomic_read(&rdev->read_errors)
> conf->max_nr_stripes)
printk(KERN_WARNING

\
 
 \ /
  Last update: 2008-05-19 03:15    [W:0.041 / U:1.508 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site