lkml.org 
[lkml]   [2008]   [May]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
Subjectasterisk hangs with RT priority
I'm seeing hanging asterisk processes on startup when using
RT priority with current -git. Unfortunately I'm not sure about
the last working version, but it was one of the final 2.6.25 rcs.
The hang stops when executing "schedtool -N $(pidof asterisk)".

The last thing seen in strace (tried multiple times, output is
identical each time) is:

...
connect(3, {sa_family=AF_FILE, path="/var/run/nscd/socket"}, 110) = -1
ENOENT (No such file or directory)
close(3) = 0
socket(PF_FILE, SOCK_STREAM, 0) = 3
fcntl64(3, F_SETFL, O_RDWR|O_NONBLOCK) = 0
connect(3, {sa_family=AF_FILE, path="/var/run/nscd/socket"}, 110) = -1
ENOENT (No such file or directory)
close(3) = 0
open("/etc/group", O_RDONLY|0x80000 /* O_??? */) = 3
_llseek(3, 0, [0], SEEK_CUR) = 0
fstat64(3, {st_mode=S_IFREG|0644, st_size=504, ...}) = 0
mmap2(NULL, 504, PROT_READ, MAP_SHARED, 3, 0) = 0xb7f2e000
_llseek(3, 504, [504], SEEK_SET) = 0
fstat64(3, {st_mode=S_IFREG|0644, st_size=504, ...}) = 0
munmap(0xb7f2e000, 504) = 0
close(3) = 0
setgroups32(3, [103, 20, 29]) = 0
setuid32(102) = 0

when executing the schedtool command above at this point, it
continues with

capset(0x19980330, 0, {CAP_NET_ADMIN, CAP_NET_ADMIN, 0}) = 0
geteuid32() = 102
stat64("/etc/asterisk/extconfig.conf", {st_mode=S_IFREG|0640,
st_size=1506, ...}) = 0
open("/etc/asterisk/extconfig.conf", O_RDONLY|O_LARGEFILE) = 3
...

sysrq-t shows:
...
[ 32.032337] =======================
[ 32.032337] S21asterisk S 00000000 0 1220 1148
[ 32.032337] c7d7cf00 00000282 c0103158 00000000 c10e1800
c7cbbc00 c7cbbd6c ffffffea
[ 32.032337] 00000004 c7cbbbf8 c7d7cf78 c012097f c7cbaa80
070c0065 070c0065 c7d7cf3c
[ 32.032337] 00000000 c7cbbd00 0000000c 00000000 00000003
c7cbbc00 00000001 c7cbbc00
[ 32.032337] Call Trace:
[ 32.032337] [<c0103158>] ? do_notify_resume+0x51/0x78e
[ 32.032337] [<c012097f>] do_wait+0x5b1/0xb8c
[ 32.032337] [<c0119ce2>] ? default_wake_function+0x0/0xd
[ 32.032337] [<c0120fbf>] sys_wait4+0x65/0xa2
[ 32.032337] [<c0121023>] sys_waitpid+0x27/0x29
[ 32.032337] [<c0103c4a>] syscall_call+0x7/0xb
[ 32.032337] [<c0320000>] ? serial_pci_guess_board+0x170/0x1ce
[ 32.032337] =======================
[ 32.032337] asterisk R running 0 1229 1220
[ 32.032337] c7d7afb0 00000286 00000000 00001000 00000000
c7cbaa80 c7cbabf0 b7fa9ff4
[ 32.032337] b7faa668 b7f68b40 c7d7a000 c0103cee b7fa9ff4
00000007 0000035f b7faa668
[ 32.032337] b7f68b40 bfca8b04 0804abc8 0000007b 0000007b
c0100000 ffffffff b7f97ff6
[ 32.032337] Call Trace:
[ 32.032337] [<c0103cee>] work_resched+0x5/0x28
[ 32.032337] =======================
...
[ 32.032337] Sched Debug Version: v0.07, 2.6.26-rc1 #28
[ 32.032337] now at 31553.299102 msecs
[ 32.032337] .sysctl_sched_latency : 20.000000
[ 32.032337] .sysctl_sched_min_granularity : 4.000000
[ 32.032337] .sysctl_sched_wakeup_granularity : 10.000000
[ 32.032337] .sysctl_sched_child_runs_first : 0.000001
[ 32.032337] .sysctl_sched_features : 895
[ 32.032337]
[ 32.032337] cpu#0, 2667.480 MHz
[ 32.032337] .nr_running : 3
[ 32.032337] .load : 179570
[ 32.032337] .nr_switches : 7594
[ 32.032337] .nr_load_updates : 6015
[ 32.032337] .nr_uninterruptible : 0
[ 32.032337] .jiffies : 4294698635
[ 32.032337] .next_balance : 0.000000
[ 32.032337] .curr->pid : 1235
[ 32.032337] .clock : 31339.548336
[ 32.032337] .cpu_load[0] : 179570
[ 32.032337] .cpu_load[1] : 178546
[ 32.032337] .cpu_load[2] : 178043
[ 32.032337] .cpu_load[3] : 177875
[ 32.032337] .cpu_load[4] : 178008
[ 32.032337]
[ 32.032337] cfs_rq[0]:
[ 32.032337] .exec_clock : 0.000000
[ 32.032337] .MIN_vruntime : 0.000001
[ 32.032337] .min_vruntime : 6015.548989
[ 32.032337] .max_vruntime : 0.000001
[ 32.032337] .spread : 0.000000
[ 32.032337] .spread0 : 0.000000
[ 32.032337] .nr_running : 0
[ 32.032337] .load : 0
[ 32.032337] .nr_spread_over : 0
[ 32.032337]
[ 32.032337] cfs_rq[0]:
[ 32.032337] .exec_clock : 0.000000
[ 32.032337] .MIN_vruntime : 0.000001
[ 32.032337] .min_vruntime : 6015.548989
[ 32.032337] .max_vruntime : 0.000001
[ 32.032337] .spread : 0.000000
[ 32.032337] .spread0 : 0.000000
[ 32.032337] .nr_running : 0
[ 32.032337] .load : 0
[ 32.032337] .nr_spread_over : 0
[ 32.032337]
[ 32.032337] cfs_rq[0]:
[ 32.032337] .exec_clock : 0.000000
[ 32.032337] .MIN_vruntime : 0.000001
[ 32.032337] .min_vruntime : 6015.548989
[ 32.032337] .max_vruntime : 0.000001
[ 32.032337] .spread : 0.000000
[ 32.032337] .spread0 : 0.000000
[ 32.032337] .nr_running : 0
[ 32.032337] .load : 0
[ 32.032337] .nr_spread_over : 0
[ 32.032337]
[ 32.032337] cfs_rq[0]:
[ 32.032337] .exec_clock : 0.000000
[ 32.032337] .MIN_vruntime : 0.000001
[ 32.032337] .min_vruntime : 6015.548989
[ 32.032337] .max_vruntime : 0.000001
[ 32.032337] .spread : 0.000000
[ 32.032337] .spread0 : 0.000000
[ 32.032337] .nr_running : 0
[ 32.032337] .load : 0
[ 32.032337] .nr_spread_over : 0
[ 32.032337]
[ 32.032337] cfs_rq[0]:
[ 32.032337] .exec_clock : 0.000000
[ 32.032337] .MIN_vruntime : 26351.612585
[ 32.032337] .min_vruntime : 6015.548989
[ 32.032337] .max_vruntime : 26351.612585
[ 32.032337] .spread : 0.000000
[ 32.032337] .spread0 : 0.000000
[ 32.032337] .nr_running : 2
[ 32.032337] .load : 2048
[ 32.032337] .nr_spread_over : 0
[ 32.032337]
[ 32.032337] runnable tasks:
[ 32.032337] task PID tree-key switches prio
exec-runtime
sum-exec sum-sleep
[ 32.032337]
--------------------------------------------------------------------------------
--------------------------
[ 32.032337] klogd 1168 26351.612585 14 120
0
0 0.000000 0.000000
0.000000
[ 32.032337] asterisk 1229 25780.061231 22 89
0
0 0.000000 0.000000
0.000000
[ 32.032337] R bash 1235 26362.344107 89 120
0
0 0.000000 0.000000
0.000000
[ 32.032337]


The above is from inside lguest, but the problem happens on
a real system as well. If more information is needed, please
ask.


\
 
 \ /
  Last update: 2008-05-18 18:13    [W:0.055 / U:27.288 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site