lkml.org 
[lkml]   [2008]   [May]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: Regression- XFS won't mount on partitioned md array
David Greaves wrote:
> Eric Sandeen wrote:

>>> I get:
>>> md_d0: p1 p2
>>> XFS mounting filesystem md_d0p1
>>> attempt to access beyond end of device
>>> md_d0p2: rw=0, want=195311, limit=195304
>> what does /proc/partitions say about md_d0p1 and p2? Is it different
>> between the older & newer kernel?

...

> 2.6.25.4 (bad)
> 254 0 1250241792 md_d0
> 254 1 1250144138 md_d0p1
> 254 2 97652 md_d0p2
>
> So nothing obvious there then...
>
>> What does xfs_info /mount/point say about the filesystem when you mount
>> it under the older kernel? Or... if you can't mount it,
> teak:~# xfs_info /media/
> meta-data=/dev/md_d0p1 isize=256 agcount=32, agsize=9766751 blks
> = sectsz=512 attr=0
> data = bsize=4096 blocks=312536032, imaxpct=25
> = sunit=0 swidth=0 blks
> naming =version 2 bsize=4096
> log =external bsize=4096 blocks=24413, version=2
> = sectsz=512 sunit=0 blks, lazy-count=0
> realtime =none extsz=65536 blocks=0, rtextents=0

ok, and with:

> Partition Table for /dev/md_d0
>
> First Last
> # Type Sector Sector Offset Length Filesystem Type (ID) Flag
> -- ------- ----------- ----------- ------ ----------- -------------------- ----
> 1 Primary 0 2500288279 4 2500288280 Linux (83) None
> 2 Primary 2500288280 2500483583 0 195304 Non-FS data (DA) None

So, xfs thinks the external log is 24413 4k blocks (from the sb geometry
printed by xfs_info). This is 97652 1k units (matching your
/proc/partitions output) and 195304 512-byte sectors (matching the
partition table output). So that all looks consistent.

So if xfs is doing:

>>> md_d0p2: rw=0, want=195311, limit=195304
>>> XFS: empty log check failed

it surely does seem to be trying to read past the end of what even it
thinks is the end of its log.

And, with your geometry I can reproduce this w/o md, partitioned or not.
So looks like xfs itself is busted:

loop5: rw=0, want=195311, limit=195304

I'll see if I have a little time today to track down the problem.

Thanks,

-Eric


\
 
 \ /
  Last update: 2008-05-17 17:19    [from the cache]
©2003-2011 Jasper Spaans