lkml.org 
[lkml]   [2008]   [May]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: [PATCH] usb-serial: pl2303: add support for RATOC REX-USB60F
    On Fri, May 16, 2008 at 05:13:45PM +0900, Atsushi Nemoto wrote:
    > # Sorry, resend with new linux-usb ML address.
    >
    > On Fri, 18 Jan 2008 18:58:28 +0900, Akira Tsukamoto <akirat@rd.scei.sony.co.jp> wrote:
    > > pl2303: add support for RATOC REX-USB60F
    > >
    > > This patch adds support for RATOC REX-USB60F Serial Adapters,
    > > which is widely used in Japan recently.
    > >
    > > Signed-off-by: Akira Tsukamoto <akirat@rd.scei.sony.co.jp>
    > > ---
    > >
    > > diff -uprX dontdiff linux-2.6.24-rc8.orig/drivers/usb/serial/pl2303.c linux-2.6.24-rc8/drivers/usb/serial/pl2303.c
    > > --- linux-2.6.24-rc8.orig/drivers/usb/serial/pl2303.c 2008-01-18 18:11:51.000000000 +0900
    > > +++ linux-2.6.24-rc8/drivers/usb/serial/pl2303.c 2008-01-18 18:43:28.000000000 +0900
    > > @@ -65,6 +65,7 @@ static struct usb_device_id id_table []
    > > { USB_DEVICE(ITEGNO_VENDOR_ID, ITEGNO_PRODUCT_ID_2080) },
    > > { USB_DEVICE(MA620_VENDOR_ID, MA620_PRODUCT_ID) },
    > > { USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID) },
    > > + { USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID_USB60F) },
    > > { USB_DEVICE(TRIPP_VENDOR_ID, TRIPP_PRODUCT_ID) },
    > > { USB_DEVICE(RADIOSHACK_VENDOR_ID, RADIOSHACK_PRODUCT_ID) },
    > > { USB_DEVICE(DCU10_VENDOR_ID, DCU10_PRODUCT_ID) },
    >
    > Hi. I tried RATOC REX-USB60F with pl2303 driver and got oops in
    > pl2303_open(). The pl2303 expects a interrupt_in endpoint but my
    > device does not have interrupt_in. So this line in pl2303_open()
    > cause oops.
    >
    > port->interrupt_in_urb->dev = serial->dev;
    >
    > This device works fine with the ftdi_sio driver, with "vendor=0x584
    > product=0xb020" module option. (0x584 is RATOC_VENDOR_ID and 0xb020
    > is RATOC_PRODUCT_ID_USB60F).

    Ick, thanks for letting me know.

    > Is the pl2303 driver appropriate for this device?

    Based on your lsusb output, no, I think it is the ftdi_sio one. I'll go
    apply your patch.

    thanks again,

    greg k-h


    \
     
     \ /
      Last update: 2008-05-16 19:33    [W:0.024 / U:121.000 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site