Messages in this thread | | | Date | Wed, 14 May 2008 01:10:07 -0700 | From | Andrew Morton <> | Subject | Re: Problems with mainboard INTEL D201GLY2A, pci devices only available with acpi=noirq |
| |
On Wed, 14 May 2008 07:58:42 +0200 Robert Goldner <robert@au-79.de> wrote:
> I use a INTEL D201GLY2A mainboard, and after serveral trys PCI devices > were only useable (not visable) with the boot-parameter acpi=noirq (or > noacpi). I tryed several kernel-versions (stated with 2.6.22), and no > sucess without his parameter. > Without acpi=noirq all pci devices are deteced well, but if you want to > use them, there is no response. > > So, now some (as I thnik) relevant informations: > lspci > 00:00.0 Host bridge: Silicon Integrated Systems [SiS] 662 Host (rev 01) > 00:01.0 PCI bridge: Silicon Integrated Systems [SiS] SiS AGP Port > 00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS964 [MuTIOL > 00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev > 00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] > 00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.1 > 00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.1 > 00:03.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.1 > 00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 > 00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 PCI > 00:05.0 IDE interface: Silicon Integrated Systems [SiS] SATA (rev 01) > 00:06.0 Ethernet controller: Atheros Communications Inc. AR5212/AR5213 > 00:1f.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge > 01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] > > > .config (I did not attach all information about drivers, because I don__t > think that this is relevant)
Probably your best approach will be to raise a report against acpi at bugzilla.kernel.org, please. These things do get fixed, but it takes some time.
Thanks.
| |