lkml.org 
[lkml]   [2008]   [May]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: NET_SCHED cbq dropping too many packets on a bonding interface

(cc netdev)

On Thu, 15 May 2008 12:25:19 +0930 "Kingsley Foreman" <kingsley@internode.com.au> wrote:

> Ive been using qdisc for quite a while without any problems,
> I just rebuilt a gentoo box with 2.6.25 kernel that does a lot of traffic
> ~1000mbits+ over a bonded interface
>
> Im however seeing a big problem with cbq class dropping packets for no
> reason i can see, and it is causing a lot of speed issues.
>
> the basic config is this
> _____________________________________________________________________
> /sbin/tc qdisc del dev bond0 root
> /sbin/tc qdisc add dev bond0 root handle 1 cbq bandwidth 2000Mbit avpkt 1000
> cell 8
> /sbin/tc class change dev bond0 root cbq weight 200Mbit allot 1514
>
> /sbin/tc class add dev bond0 parent 1: classid 1:1280 cbq bandwidth 2000Mbit
> rate 1200Mbit weight 120Mbit prio 1 allot 1514 cell 8 maxburst 120 minburst
> 1 minidle 0 avpkt 1000 bounded
> /sbin/tc filter add dev bond0 parent 1:0 protocol ip prio 300 route to 5
> classid 1:1280
>
> /sbin/tc class add dev bond0 parent 1: classid 1:1281 cbq bandwidth 2000Mbit
> rate 400Mbit weight 40Mbit prio 6 allot 1514 cell 8 maxburst 120 minburst 1
> minidle 0 avpkt 1000 bounded
> /sbin/tc filter add dev bond0 parent 1:0 protocol ip prio 300 route to 6
> classid 1:1281
> ____________________________________________________________________
>
> So there is a lot of bandwidth handed out but it is still dropping a lot of
> packets for very small ammounts of traffic eg 300mbits.
>
> However the biggest problem im seeing is if i just do this
>
> __________________________________________________________________
> /sbin/tc qdisc del dev bond0 root
> /sbin/tc qdisc add dev bond0 root handle 1 cbq bandwidth 2000Mbit avpkt 1000
> cell 8
> /sbin/tc class change dev bond0 root cbq weight 200Mbit allot 1514
> ___________________________________________________________________
>
> after 30sec I get results like
> ___________________________________________________________________
>
> ### bond0: queueing disciplines
>
> qdisc cbq 1: root rate 2000Mbit (bounded,isolated) prio no-transmit
> Sent 574230043 bytes 407156 pkt (dropped 2524, overlimits 0 requeues 0)
> rate 0bit 0pps backlog 0b 0p requeues 0
> borrowed 0 overactions 0 avgidle 3 undertime 0
>
> ### bond0: traffic classes
>
> class cbq 1: root rate 2000Mbit (bounded,isolated) prio no-transmit
> Sent 574330783 bytes 407225 pkt (dropped 2525, overlimits 0 requeues 0)
> rate 0bit 0pps backlog 0b 0p requeues 0
> borrowed 0 overactions 0 avgidle 3 undertime 0
> __________________________________________________________________
>
> I can't for the life if me work out why it is dropping so many packets for
> while doing so little traffic when i enable cbq the transfer rate drops by
> approx 30%, any help would be great, and any improvements to my command
> lines would be good also.
>
>
> Kingsley Foreman



\
 
 \ /
  Last update: 2008-05-15 05:59    [W:0.118 / U:0.104 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site