lkml.org 
[lkml]   [2008]   [May]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: Problems with mainboard INTEL D201GLY2A, pci devices only available with acpi=noirq
Robert Goldner wrote:
> Hi everyone,
>
> I use a INTEL D201GLY2A mainboard, and after serveral trys PCI devices
> were only useable (not visable) with the boot-parameter acpi=noirq (or
> noacpi). I tryed several kernel-versions (stated with 2.6.22), and no
> sucess without his parameter.
> Without acpi=noirq all pci devices are deteced well, but if you want to
> use them, there is no response.

Do you have the latest BIOS on this board? Any nonstandard BIOS
settings? It looks like the board is not using APIC but the ACPI IRQ
information is giving out IRQs over 15, which doesn't make any sense.
Maybe you're running in some kind of broken/untested BIOS configuration.


\
 
 \ /
  Last update: 2008-05-15 04:05    [W:0.033 / U:0.764 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site