lkml.org 
[lkml]   [2008]   [May]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Subject[PATCH] leds: Add support for Philips PCA955x I2C LED drivers
From
Date
This driver supports the PCA9550, PCA9551, PCA9552, and PCA9553
LED driver chips.

Signed-off-by: Nate Case <ncase@xes-inc.com>
---
drivers/leds/Kconfig | 8 +
drivers/leds/Makefile | 1 +
drivers/leds/leds-pca955x.c | 384 +++++++++++++++++++++++++++++++++++++++++++
include/linux/leds.h | 14 ++
4 files changed, 407 insertions(+), 0 deletions(-)
create mode 100644 drivers/leds/leds-pca955x.c

diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 86a369b..24f8357 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -147,6 +147,14 @@ config LEDS_CLEVO_MAIL
To compile this driver as a module, choose M here: the
module will be called leds-clevo-mail.

+config LEDS_PCA955X
+ tristate "LED Support for PCA955x I2C chips"
+ depends on LEDS_CLASS && I2C
+ help
+ This option enables support for LEDs connected to PCA955x
+ LED driver chips accessed via the I2C bus. Supported
+ devices include PCA9550, PCA9551, PCA9552, and PCA9553.
+
comment "LED Triggers"

config LEDS_TRIGGERS
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index 973d626..c26c145 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -21,6 +21,7 @@ obj-$(CONFIG_LEDS_CM_X270) += leds-cm-x270.o
obj-$(CONFIG_LEDS_CLEVO_MAIL) += leds-clevo-mail.o
obj-$(CONFIG_LEDS_HP6XX) += leds-hp6xx.o
obj-$(CONFIG_LEDS_FSG) += leds-fsg.o
+obj-$(CONFIG_LEDS_PCA955X) += leds-pca955x.o

# LED Triggers
obj-$(CONFIG_LEDS_TRIGGER_TIMER) += ledtrig-timer.o
diff --git a/drivers/leds/leds-pca955x.c b/drivers/leds/leds-pca955x.c
new file mode 100644
index 0000000..a2a6100
--- /dev/null
+++ b/drivers/leds/leds-pca955x.c
@@ -0,0 +1,384 @@
+/*
+ * drivers/leds/leds-pca955x.c
+ *
+ * Copyright 2007-2008 Extreme Engineering Solutions, Inc.
+ *
+ * Author: Nate Case <ncase@xes-inc.com>
+ *
+ * This file is subject to the terms and conditions of version 2 of
+ * the GNU General Public License. See the file COPYING in the main
+ * directory of this archive for more details.
+ *
+ * LED driver for various PCA955x I2C LED drivers
+ *
+ * Supported devices:
+ *
+ * Device Description 7-bit slave address
+ * ------ ----------- -------------------
+ * PCA9550 2-bit driver 0x60 .. 0x61
+ * PCA9551 8-bit driver 0x60 .. 0x67
+ * PCA9552 16-bit driver 0x60 .. 0x67
+ * PCA9553/01 4-bit driver 0x62
+ * PCA9553/02 4-bit driver 0x63
+ *
+ * Philips PCA955x LED driver chips follow a register map as shown below:
+ *
+ * Control Register Description
+ * ---------------- -----------
+ * 0x0 Input register 0
+ * ..
+ * NUM_INPUT_REGS - 1 Last Input register X
+ *
+ * NUM_INPUT_REGS Frequency prescaler 0
+ * NUM_INPUT_REGS + 1 PWM register 0
+ * NUM_INPUT_REGS + 2 Frequency prescaler 1
+ * NUM_INPUT_REGS + 3 PWM register 1
+ *
+ * NUM_INPUT_REGS + 4 LED selector 0
+ * NUM_INPUT_REGS + 4
+ * + NUM_LED_REGS - 1 Last LED selector
+ *
+ * where NUM_INPUT_REGS and NUM_LED_REGS vary depending on how many
+ * bits the chip supports.
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/string.h>
+#include <linux/ctype.h>
+#include <linux/leds.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/workqueue.h>
+
+#undef DEBUG
+
+#ifdef DEBUG
+#define DBG(x...) printk(KERN_INFO "leds-pca955x: " x)
+#else
+#define DBG(x...)
+#endif
+
+/* 8 bits per input register */
+#define NUM_INPUT_REGS(bits) ((bits+7)/8)
+/* 4 bits per LED selector register */
+#define NUM_LED_REGS(bits) ((bits+3)/4)
+
+/* LED select registers determine the source that drives LED outputs */
+#define PCA955X_LS_LED_ON 0x00 /* Output LOW */
+#define PCA955X_LS_LED_OFF 0x01 /* Output HI-Z */
+#define PCA955X_LS_BLINK0 0x02 /* Blink at PWM0 rate */
+#define PCA955X_LS_BLINK1 0x03 /* Blink at PWM1 rate */
+
+/* Set only the two bits in the LED selector register of the specified LED */
+#define LED_SET(reg, led, state) \
+ ((reg & (~(0x3 << (led << 1)))) | ((state & 0x0F) << (led << 1)))
+
+enum pca955x_type {
+ pca9550,
+ pca9551,
+ pca9552,
+ pca9553,
+};
+
+struct pca955x_chipdef {
+ int bits;
+ u8 slv_addr; /* 7-bit slave address mask */
+ int slv_addr_shift; /* Number of bits to ignore */
+};
+
+static struct pca955x_chipdef pca955x_chipdefs[] = {
+[pca9550] = {
+ .bits = 2,
+ .slv_addr = /* 110000x */ 0x60,
+ .slv_addr_shift = 1,
+},
+[pca9551] = {
+ .bits = 8,
+ .slv_addr = /* 1100xxx */ 0x60,
+ .slv_addr_shift = 3,
+},
+[pca9552] = {
+ .bits = 16,
+ .slv_addr = /* 1100xxx */ 0x60,
+ .slv_addr_shift = 3,
+},
+[pca9553] = {
+ .bits = 4,
+ .slv_addr = /* 110001x */ 0x62,
+ .slv_addr_shift = 1,
+},
+};
+
+static const struct i2c_device_id pca955x_id[] = {
+ { "pca9550", pca9550 },
+ { "pca9551", pca9551 },
+ { "pca9552", pca9552 },
+ { "pca9553", pca9553 },
+};
+MODULE_DEVICE_TABLE(i2c, pca955x_id);
+
+struct pca955x_led {
+ struct pca955x_chipdef *chipdef;
+ struct i2c_client *client;
+ struct work_struct work;
+ spinlock_t lock;
+ enum led_brightness brightness;
+ struct led_classdev led_cdev;
+ int led_num; /* 0 .. 15 potentially */
+ char name[32];
+};
+
+/*
+ * Write to frequency prescaler register, used to program the
+ * period of the PWM output. period = (PSCx + 1) / 38
+ */
+static void pca955x_write_psc(struct i2c_client *client, int n, u8 val)
+{
+ struct pca955x_led *pca955x = i2c_get_clientdata(client);
+
+ i2c_smbus_write_byte_data(client,
+ NUM_INPUT_REGS(pca955x->chipdef->bits) + 2*n,
+ val);
+}
+
+/*
+ * Write to PWM register, which determines the duty cycle of the
+ * output. LED is OFF when the count is less than the value of this
+ * register, and ON when it is greater. If PWMx == 0, LED is always OFF.
+ *
+ * Duty cycle is (256 - PWMx) / 256
+ */
+static void pca955x_write_pwm(struct i2c_client *client, int n, u8 val)
+{
+ struct pca955x_led *pca955x = i2c_get_clientdata(client);
+
+ i2c_smbus_write_byte_data(client,
+ NUM_INPUT_REGS(pca955x->chipdef->bits) + 1 + 2*n,
+ val);
+}
+
+/*
+ * Write to LED selector register, which determines the source that
+ * drives the LED output.
+ */
+static void pca955x_write_ls(struct i2c_client *client, int n, u8 val)
+{
+ struct pca955x_led *pca955x = i2c_get_clientdata(client);
+
+ i2c_smbus_write_byte_data(client,
+ NUM_INPUT_REGS(pca955x->chipdef->bits) + 4 + n,
+ val);
+}
+
+/*
+ * Read the LED selector register, which determines the source that
+ * drives the LED output.
+ */
+static u8 pca955x_read_ls(struct i2c_client *client, int n)
+{
+ struct pca955x_led *pca955x = i2c_get_clientdata(client);
+
+ return (u8) i2c_smbus_read_byte_data(client,
+ NUM_INPUT_REGS(pca955x->chipdef->bits) + 4 + n);
+}
+
+static void pca955x_led_work(struct work_struct *work)
+{
+ struct pca955x_led *pca955x =
+ container_of(work, struct pca955x_led, work);
+ u8 ls;
+ int chip_ls; /* which LSx to use (0-3 potentially) */
+ int ls_led; /* which set of bits within LSx to use (0-3) */
+
+ chip_ls = pca955x->led_num / 4;
+ ls_led = pca955x->led_num % 4;
+
+ ls = pca955x_read_ls(pca955x->client, chip_ls);
+
+ switch (pca955x->brightness) {
+ case LED_FULL:
+ ls = LED_SET(ls, ls_led, PCA955X_LS_LED_ON);
+ break;
+ case LED_OFF:
+ ls = LED_SET(ls, ls_led, PCA955X_LS_LED_OFF);
+ break;
+ case LED_HALF:
+ ls = LED_SET(ls, ls_led, PCA955X_LS_BLINK0);
+ break;
+ default:
+ /*
+ * Use PWM1 for all other values. This has the unwanted
+ * side effect of making all LEDs on the chip share the
+ * same brightness level if set to a value other than
+ * OFF, HALF, or FULL. But, this is probably better than
+ * just turning off for all other values.
+ */
+ pca955x_write_pwm(pca955x->client, 1, 255-pca955x->brightness);
+ ls = LED_SET(ls, ls_led, PCA955X_LS_BLINK1);
+ break;
+ }
+
+ pca955x_write_ls(pca955x->client, chip_ls, ls);
+}
+
+void pca955x_led_set(struct led_classdev *led_cdev, enum led_brightness value)
+{
+ struct pca955x_led *pca955x =
+ container_of(led_cdev, struct pca955x_led, led_cdev);
+
+ spin_lock(&(pca955x->lock));
+ pca955x->brightness = value;
+
+ /*
+ * Must use workqueue for the actual I/O since I2C operations
+ * can sleep.
+ */
+ schedule_work(&(pca955x->work));
+
+ spin_unlock(&(pca955x->lock));
+}
+
+static int __devinit pca955x_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct pca955x_led *pca955x;
+ int i;
+ int err = -ENODEV;
+ struct pca955x_chipdef *chip =
+ &pca955x_chipdefs[id->driver_data];
+ struct i2c_adapter *adapter =
+ to_i2c_adapter(client->dev.parent);
+ struct led_platform_data *pdata = client->dev.platform_data;
+
+ DBG("probe() enter: chip 0x%02x, with type='%s'\n", client->addr,
+ id->name);
+
+ /* Make sure the slave address / chip type combo given is possible */
+ if (((client->addr >> chip->slv_addr_shift) << chip->slv_addr_shift)
+ != chip->slv_addr) {
+ dev_err(&client->dev, "invalid slave address %02x\n",
+ client->addr);
+ return -ENODEV;
+ }
+
+ printk(KERN_INFO "leds-pca955x: Using %s %d-bit LED driver at "
+ "slave address 0x%02x\n",
+ id->name, chip->bits, client->addr);
+
+ DBG("probe() checking i2c functionality\n");
+ if (!i2c_check_functionality(adapter, I2C_FUNC_I2C))
+ return -EIO;
+
+ if (pdata) {
+ if (pdata->num_leds != chip->bits) {
+ dev_err(&client->dev, "board info claims %d LEDs"
+ " on a %d-bit chip\n",
+ pdata->num_leds, chip->bits);
+ return -ENODEV;
+ }
+ }
+
+ for (i = 0; i < chip->bits; i++) {
+ pca955x = kzalloc(sizeof(struct pca955x_led), GFP_KERNEL);
+ if (!pca955x) {
+ err = -ENOMEM;
+ goto exit;
+ }
+
+ pca955x->chipdef = chip;
+ pca955x->client = client;
+ pca955x->led_num = i;
+ /* Platform data can specify LED names and default triggers */
+ if (pdata) {
+ if (pdata->leds[i].name)
+ snprintf(pca955x->name, 32, "pca955x:%s",
+ pdata->leds[i].name);
+ if (pdata->leds[i].default_trigger)
+ pca955x->led_cdev.default_trigger =
+ pdata->leds[i].default_trigger;
+ } else {
+ snprintf(pca955x->name, 32, "pca955x:%d", i);
+ }
+ spin_lock_init(&pca955x->lock);
+
+ pca955x->led_cdev.name = pca955x->name;
+ pca955x->led_cdev.brightness_set =
+ pca955x_led_set;
+
+ /*
+ * Client data is a pointer to the _first_ pca955x_led
+ * struct
+ */
+ if (i == 0)
+ i2c_set_clientdata(client, pca955x);
+
+ INIT_WORK(&(pca955x->work), pca955x_led_work);
+
+ led_classdev_register(&client->dev, &(pca955x->led_cdev));
+ }
+
+ /* Turn off LEDs */
+ for (i = 0; i < NUM_LED_REGS(chip->bits); i++)
+ pca955x_write_ls(client, i, 0x55);
+
+ /* PWM0 is used for half brightness or 50% duty cycle */
+ pca955x_write_pwm(client, 0, 255-LED_HALF);
+
+ /* PWM1 is used for variable brightness, default to OFF */
+ pca955x_write_pwm(client, 1, 0);
+
+ /* Set to fast frequency so we do not see flashing */
+ pca955x_write_psc(client, 0, 0);
+ pca955x_write_psc(client, 1, 0);
+
+ DBG("probe() returning\n");
+
+ return 0;
+exit:
+ return err;
+}
+
+static int __devexit pca955x_remove(struct i2c_client *client)
+{
+ struct pca955x_led *pca955x = i2c_get_clientdata(client);
+ int leds = pca955x->chipdef->bits;
+ int i;
+
+ for (i = 0; i < leds; i++) {
+ led_classdev_unregister(&(pca955x->led_cdev));
+ cancel_work_sync(&(pca955x->work));
+ kfree(pca955x);
+ pca955x = pca955x + 1;
+ }
+
+ return 0;
+}
+
+static struct i2c_driver pca955x_driver = {
+ .driver = {
+ .name = "leds-pca955x",
+ .owner = THIS_MODULE,
+ },
+ .probe = pca955x_probe,
+ .remove = __devexit_p(pca955x_remove),
+ .id_table = pca955x_id,
+};
+
+static int __init pca955x_leds_init(void)
+{
+ DBG("init() adding i2c driver\n");
+ return i2c_add_driver(&pca955x_driver);
+}
+
+static void __exit pca955x_leds_exit(void)
+{
+ i2c_del_driver(&pca955x_driver);
+}
+
+module_init(pca955x_leds_init);
+module_exit(pca955x_leds_exit);
+
+MODULE_AUTHOR("Nate Case <ncase@xes-inc.com>");
+MODULE_DESCRIPTION("PCA955x LED driver");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/leds.h b/include/linux/leds.h
index 519df72..1cc9341 100644
--- a/include/linux/leds.h
+++ b/include/linux/leds.h
@@ -118,6 +118,20 @@ extern void ledtrig_ide_activity(void);
#define ledtrig_ide_activity() do {} while(0)
#endif

+/*
+ * Generic LED platform data for describing LED names and default triggers.
+ */
+struct led_info {
+ const char *name;
+ char *default_trigger;
+ int flags;
+};
+
+struct led_platform_data {
+ int num_leds;
+ struct led_info *leds;
+};
+
/* For the leds-gpio driver */
struct gpio_led {
const char *name;
--
1.5.4.4




\
 
 \ /
  Last update: 2008-05-15 02:11    [W:0.078 / U:0.208 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site